P6SMB RUILON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Specifications are subject to change without notice. Please refer to http://www.ruilon.com for current information.
Page:1 Specifications are subject to change without notice. Please refer to http://www.ruilon.com for current information. Transient Voltage Suppressors - P6SMB Series
Features
Mechanical Characteristics Rating Symbol Value Units Peak Pulse Power Dissipation by 10x1000μs test waveform (Fig.1)(Note 1) PPPM 600 Watts Steady State Power Dissipation on inifinite heat sink at TL=75ºC (Fig. 5) PD 5 Watts Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional only (Note 2) IFSM 100 Amps Maximum Instantaneous Forward Voltage at 25A for Unidirectional only (Note 3) VF 3.5/5.0 V Operating junction and Storage Temperature Range. TJ,TSTG -55°C to 150°C °C Typical Thermal Resistance Junction to Lead RuJL 20 °C/W Typical Thermal Resistance Junction to Ambient RuJA 100 °C/W Notes: 1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25°C per Fig. 2. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute maximum. 4. VF<3.5V for VBR < 200V and VF<5.0V for VBR > 201V. 1. Halogen-free 2. Rohs compliant 3. Typical maximum temperature coefficient 4. ΔVBR = 0.1% x VBR@25°C x ΔT 5. Glass passivated Chip junction in DO-214AA package 6. 600W peak pulse capadility at 10×1000μs waveform, repetition rate(duty cycles):0.01% 7. Fast response time:typically less than 1.0ps from 0 Volts to BV min 8. Excellent clamping capability 9. Low incremental surge resistance
10 Typical IR less than 5μA above 12V
- High temperature soldering guaranteed: 260°C/40 seconds / 0.375”, 12. (9.5mm) lead length, 5lbs., (2.3kg) tension 13. Plastic package has underwriters laboratory flammability classification 94v-0 TVS devices are ideal for the protection of I/O interfaces,VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications. UNI BI UNI BI AnodeCathode
Applications
Transient Voltage Suppressors - P6SMB Series CircuitProtection System Page:2 Specifications are subject to change without notice. Please refer to http://www.ruilon.com for current information. Electriacl Characteristics Type Number Reverse Stand- Off V oltage Breakdown V oltage@IT Test Current Maximum Clamping V oltage@IPP Peak Pulse Current Reverse Leakage @VRWM (UNI) (BI) VRWM(V) VBR MIN.(V) VBR MAX.(V) IT(mA) VC(V) IPP(A) IR(µA)
Transient Voltage Suppressors - P6SMB Series CircuitProtection System Page:4 Specifications are subject to change without notice. Please refer to http://www.ruilon.com for current information. Soldering Parameters Feflow Condition Lead-free assembly Pre Heat - Temperature Min (T s(min)) 150°C - Temperature Max (T s(min)) 200°C - Time (min to max) (t s) 60-180 secs Average ramp up rate (Liquidus Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (T L) (Liquidus) 217°C - Time (min to max) (t s) 60-150 seconds Peak Temperature (T P) 260+0/-5 °C Time within 5°C of actual peak Temperature (t p) 20-40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (T P) 8 minutes Max. Do not exceed 280°C T( erutarep meT) Time (t) Ts(min) Ts(max) TL TP ts Preheat tL tp eno Z lacitirCpu-pmaR TL to T P Ramp-down Physical Specifications Weight 0.003 ounce, 0.093 grams Case JEDEC DO214AA. Molded plastic body over glass passivated junction Polarity Color band denotes cathode except Bidirectional. Termina Matte Tin-plated leads, Solderable per JESD22-B102D Environmental Specifications Temperature Cycle JESD22-A104 Pressure Cooker JESD 22-A102 High Temp. Storage JESD22-A103 HTRB JESD22-A108 Thermal Shock JESD22-A106
Page:5 Specifications are subject to change without notice. Please refer to http://www.ruilon.com for current information. Transient Voltage Suppressors - P6SMB Series Dimensions
- Storage Conditions: 1. Storage Temperature: -10°C~+40°C 2. Relative Humidity:≤75%RH 3. Keep away from corrosive atmosphere and sunlight.
- Period of Storage: 1 year Warehouse Storage Conditions of Products DIM Inches Millimeters Min Max Min Max A 0.077 0.086 1.950 2.200 B 0.160 0.180 4.060 4.570 C 0.130 0.155 3.300 3.940 D 0.084 0.096 2.130 2.440 E 0.030 0.060 0.760 1.520 F - 0.008 - 0.203 G 0.205 0.220 5.210 5.590 H 0.006 0.012 0.152 0.305 I 0.089 - 2.260 - J 0.085 - 2.160 - K - 0.107 - 2.740 L 0.085 - 2.160 - Unit:mmDO-214AA (SMB J-Bend) Part Numbering System VOLTAGE BI-DIRECTIONAL 5% VOLTAGE TOLERANCE SERIES XXXC AP6SMB
Page:6 Specifications are subject to change without notice. Please refer to http://www.ruilon.com for current information. RuiLongYuan Electronics Co., Ltd.
- Reproducing and modifying information of the document is prohibited without permission from Ruilongyuan International Inc.
- Ruilongyuan International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document.
- Ruilongyuan International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred.
- Ruilongyuan International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
- Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications.Ruilongyuan International Inc. makes no representation or warranty that such applications will be suitable for the specifed use without further testing or modifcation.
- The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment,aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fullyindemnify Ruilongyuan International Inc. for any damages resulting from such improper use or sale. Tel: +86-755-8290 8296 Fax: +86-755-8290 8002 E-mail: jack@ruilon.com