DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

PAGE . 1December 16,2015-REV.09 P6SMB-AU SERIES

FEATURES

  • For surface mounted applications in order to optimize board space.
  • Glass passivated junction
  • Low inductance
  • Plastic package has Underwriters Laboratory Fammability Classification 94V-O
  • High temperature soldering : 260°C /10 seconds at terminals
  • Acqire quality system certificate : TS16949
  • AEC-Q101 qualified
  • ESD IEC-61000-4-2 Air + 30kV, Contact + 30kV
  • Lead free in compliance with EU RoHS 2011/65/EU directive
  • Green molding compound as per IEC61249 Std. . (Halogen Free) MECHANICAL DATA
  • Case: JEDEC DO-214AA ,Molded plastic over passivated junction
  • Terminals: Solder plated,solderable per MIL-STD-750,Method 2026
  • Polarity: Color band denotes cathode end
  • Standard Packaging: 12mm tape (EIA-481)
  • Weight: 0.003 ounce, 0.093 gramNOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above T A = 25 oC per Fig. 2. 2. Mounted on 5mm 2 (0.13mm thick) land areas. 3. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. 4. A transient suppressor is selected according to the working peak reverse voltage (V RWM ), which should be equal to or greater than the DC or continuous peak operating voltage level. DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. For Capacitive load derate current by 20%. SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt BREAK DOWN VOLTAGE 6.8 to 250 Volt Rating Symbol Value Units Peak Pulse Power Dissipation on tp=10/1000μs waveform (Notes 1,2, Fig.1) P PP 600 Watts Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (Notes 2,3) IFSM 100 Amps Peak Pulse Current on tp=10/1000μs waveform (Notes 1) Fig.3 I PPM see Table 1 Amps Typical Thermal Resistance Junction to Air (Notes 2) R θJA 60 OC / W ESD IEC-61000-4-2 (Air) ESD IEC-61000-4-2 (Contact) VESD +30 +30 kV Operating Junction and Storage Temperature Range T J,TSTG -55 to +150 OC

PAGE . 2December 16,2015-REV.09 P6SMB-AU SERIES Part Number Reverse Stand-off Voltage Breakdown Voltage Te s t Current Reverse Leakage Max. Clamp Voltage 10/1000μs Peak Pulse Current 10/1000μs Marking Code VRWM (Notes 4) VBR @ I T IT IR @ VRWM VC @ IPP IPP Min. Max. UNI BI UNI BI V V V mA μA μA V A UNI BI 600W Transient Voltage Suppressor P6SMB10-AU P6SMB10C-AU 8.1 9 11 1 10 20 15 40 EZJ DZJ P6SMB10A-AU P6SMB10CA-AU 8.55 9.5 10.5 1 10 20 14.5 41 EZK DZK P6SMB11-AU P6SMB11C-AU 8.92 9.9 12.1 1 5 10 16.2 37 EZL DZL P6SMB11A-AU P6SMB11CA-AU 9.4 10.5 11.6 1 5 10 15.6 38 EZM DZM P6SMB12-AU P6SMB12C-AU 9.72 10.8 13.2 1 5 5 17.3 35 EZN DZN P6SMB12A-AU P6SMB12CA-AU 10.2 11.4 12.6 1 5 5 16.7 36 EZP DZP P6SMB13-AU P6SMB13C-AU 10.5 11.7 14.3 1 1 1 19 32 EZQ DZQ P6SMB13A-AU P6SMB13CA-AU 11.1 12.4 13.7 1 1 1 18.2 33 EZR DZR P6SMB15-AU P6SMB15C-AU 12.1 13.5 16.5 1 1 1 22 27 EZS DZS P6SMB15A-AU P6SMB15CA-AU 12.8 14.3 15.8 1 1 1 21.2 28 EZT DZT P6SMB16-AU P6SMB16C-AU 12.9 14.4 17.6 1 1 1 23.5 26 EZU DZU P6SMB16A-AU P6SMB16CA-AU 13.6 15.2 16.8 1 1 1 22.5 27 EZV DZV P6SMB18-AU P6SMB18C-AU 14.5 16.2 19.8 1 1 1 26.5 23 EZW DZW P6SMB18A-AU P6SMB18CA-AU 15.3 17.1 18.9 1 1 1 25.2 24 EZX DZX P6SMB20-AU P6SMB20C-AU 16.2 18 22 1 1 1 29.1 21 EZY DZY P6SMB20A-AU P6SMB20CA-AU 17.1 19 21 1 1 1 27.7 22 EZZ DZZ P6SMB22-AU P6SMB22C-AU 17.8 19.8 24.2 1 1 1 31.9 19 EXA DXA P6SMB22A-AU P6SMB22CA-AU 18.8 20.9 23.1 1 1 1 30.6 20 EXB DXB P6SMB24-AU P6SMB24C-AU 19.4 21.6 26.4 1 1 1 34.7 17 EXC DXC P6SMB24A-AU P6SMB24CA-AU 20.5 22.8 25.2 1 1 1 33.2 18 EXD DXD P6SMB27-AU P6SMB27C-AU 21.8 24.3 29.7 1 1 1 39.1 15 EXE DXE P6SMB27A-AU P6SMB27CA-AU 23.1 25.7 28.4 1 1 1 37.5 16 EXF DXF P6SMB30-AU P6SMB30C-AU 24.3 27 33 1 1 1 43.5 14 EXG DXG P6SMB36-AU P6SMB36C-AU 29.1 32.4 39.6 1 1 1 52 11.6 EXL DXL P6SMB36A-AU P6SMB36CA-AU 30.8 34.2 37.8 1 1 1 49.9 12 EXM DXM P6SMB39A-AU P6SMB39CA-AU 33.3 37.1 41 1 1 1 53.9 11.2 EXP DXP

PAGE . 3December 16,2015-REV.09 P6SMB-AU SERIES Part Number Reverse Stand-off Voltage Breakdown Voltage Te s t Current Reverse Leakage Max. Clamp Voltage 10/1000μs Peak Pulse Current 10/1000μs Marking Code VRWM (Notes 4) VBR @ I T IT IR @ VRWM VC @ IPP IPP Min. Max. UNI BI UNI BI V V V mA μA μA V A UNI BI 600W Transient Voltage Suppressor P6SMB56A-AU P6SMB56CA-AU 47.8 53.2 58.8 1 1 1 77 7.8 EXX DXX P6SMB62-AU P6SMB62C-AU 50.2 55.8 68.2 1 1 1 89 6.8 EXY DXY P6SMB62A-AU P6SMB62CA-AU 53 58.9 65.1 1 1 1 85 7.1 EXZ DXZ P6SMB68-AU P6SMB68C-AU 55.1 61.2 74.8 1 1 1 98 6.1 EY A DY A P6SMB68A-AU P6SMB68CA-AU 58.1 64.6 71.4 1 1 1 92 6.5 EYB DY B P6SMB75-AU P6SMB75C-AU 60.7 67.5 82.5 1 1 1 108 5.5 EYC DY C P6SMB75A-AU P6SMB75CA-AU 64.1 71.3 78.8 1 1 1 103 5.8 EYD DY D P6SMB82-AU P6SMB82C-AU 66.4 73.8 90.2 1 1 1 118 5.1 EYE DY E P6SMB82A-AU P6SMB82CA-AU 70.1 77.9 86.1 1 1 1 113 5.3 EYF DYF P6SMB91-AU P6SMB91C-AU 73.7 81.9 100 1 1 1 131 4.5 EYG DY G P6SMB91A-AU P6SMB91CA-AU 77.8 86.5 95.5 1 1 1 125 4.8 EYH DY H P6SMB100-AU P6SMB100C-AU 81 90 110 1 1 1 144 4.2 EY J DY J P6SMB100A-AU P6SMB100CA-AU 85.5 95 105 1 1 1 137 4.4 EYK DY K P6SMB110-AU P6SMB110C-AU 89.2 99 121 1 1 1 158 3.8 EY L DYL P6SMB110A-AU P6SMB110CA-AU 94 105 116 1 1 1 152 4 EY M DY M P6SMB120-AU P6SMB120C-AU 97.2 108 132 1 1 1 173 3.5 EYN DY N P6SMB120A-AU P6SMB120CA-AU 102 114 126 1 1 1 165 3.6 EYP DY P P6SMB130-AU P6SMB130C-AU 105 117 143 1 1 1 187 3.2 EYQ DY Q P6SMB130A-AU P6SMB130CA-AU 111 124 137 1 1 1 179 3.3 EYR DY R P6SMB150-AU P6SMB150C-AU 121 135 165 1 1 1 215 2.8 EYS DY S P6SMB150A-AU P6SMB150CA-AU 128 143 158 1 1 1 207 2.9 EYT DYT P6SMB160-AU P6SMB160C-AU 130 144 176 1 1 1 230 2.6 EYU DY U P6SMB160A-AU P6SMB160CA-AU 136 152 168 1 1 1 219 2.7 EYV DY V P6SMB170-AU P6SMB170C-AU 138 153 187 1 1 1 244 2.5 EYW DY W P6SMB170A-AU P6SMB170CA-AU 145 162 179 1 1 1 234 2.6 EYX DY X P6SMB180-AU P6SMB180C-AU 146 162 198 1 1 1 258 2.3 EYY DYY P6SMB180A-AU P6SMB180CA-AU 154 171 189 1 1 1 246 2.4 EYZ DYZ P6SMB200-AU P6SMB200C-AU 162 180 220 1 1 1 287 2.1 EWA DWA P6SMB200A-AU P6SMB200CA-AU 171 190 210 1 1 1 274 2.2 EWB DWB P6SMB220-AU P6SMB220C-AU 175 198 242 1 1 1 344 1.8 EWC DWC P6SMB220A-AU P6SMB220CA-AU 185 209 231 1 1 1 328 1.9 EWD DWD P6SMB250-AU P6SMB250C-AU 202 225 275 1 1 1 360 1.7 EWE DWE P6SMB250A-AU P6SMB250CA-AU 214 237 263 1 1 1 344 1.8 EWF DWF

PAGE . 4December 16,2015-REV.09 P6SMB-AU SERIES

PAGE . 5December 16,2015-REV.09 P6SMB-AU SERIES MOUNTING PAD LAYOUT ORDER INFORMATION

  • Packing information T/R - 3K per 13" plastic Reel T/R - 0.5K per 7" plastic Reel

PAGE . 6December 16,2015-REV.09 P6SMB-AU SERIES Part No_packing code_Version P6SMB6.8-AU_R1_000A1 P6SMB6.8-AU_R2_000A1 For example : RB500V-40_R2_00001 Part No. Serial number Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1st Code Packing size code 2nd Code HF or RoHS 1st Code 2 nd~5th Code Tape and Ammunition Box (T/B) A N/A 0 HF 0 serial number Tape and Reel (T/R) R 7" 1 RoHS 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X Tape and Reel (Right Oriented) (TRR) S 52mm Y Tape and Reel (Left Oriented) (TRL) L PANASERT T/B CATHODE UP (PBCU) U FORMING F PANASERT T/B CATHODE DOWN (PBCD) D

PAGE . 7December 16,2015-REV.09 P6SMB-AU SERIES Disclaimer

  • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc..
  • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred.
  • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
  • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
  • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale.
  • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining.