P6SMB-28C-29 LUGUANG | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
Note: (3)V F <3.5V for devices of V BR <200V and V F <5.0V for devices of V BR >201V (1)Non-repetitive current pulse per Fig.5 and derated above T A = 25 °C per Fig.1 (2)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum Maximum instantaneous forward voltage at 25 A for unidirectional only (3) V F 3.5/5.0 V Operating junction and storage temperature range T J , T STG –55 to +150 °C Power dissipation on infinite heatsink at T L = 75 °C P D 5.0 W Peak forward surge current, 8.3 ms single half sine- wave unidirectional only (2) I FSM 100 A Peak power dissipation with a 10/1000ȝs waveform (1) P PP 600 W Peak pulse current wih a 10/1000ȝs waveform (1) I PP See Next Table A Maximum Ratings(T A =25ɗ unless otherwise noted) Parameter S y mbol Value UNIT http://www.lgesemi .com mail:lge@lgesemi.comRevision:20170301-P1
Uni Bi Min (V) Max (V) I T (mA) Note: 1. The available parts are "A" type only,the parts without A(V BR is ±10%) is not available 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having V R of 10 volts and under, the I R limit is double Electrical Characteristics(T A =25 ɗ unless otherwise noted) Part Number (Uni) Part Number (Bi) Device Marking Code Breakdown Voltage V BR T Maximum Reverse Leakage I R RWM (uA) Working Peak Reverse Voltage V RWM (V) Maximum Reverse Surge Current I PP (A) Maximum Clamping Voltage V C PP (V) P6SMB Series Transient Voltage Suppressors http://www.lgesemi .com mail:lge@lgesemi.comRevision:20170301-P1
N AVERAGE FORWARD CURRENT, (A) 0 100 1 100 25 100 100 22 150 0 0 5 0.1 30 73 5 10000 0.22 ## 0 Ratings and Charact eristics Curves (T A =25 ɗ unless otherwise noted) Fig. 1 - Pulse Derating Curve Fig. 2 - Maximum Non-Repetitive Surge Current 1.0 2.0 3.0 4.0 5.0 Steady State Power Dissipation, (W) 100 100 Peak Forward Surge Current, (A) Number of Cycles at 60 Hz T J = T J max. 8.3 ms Single Half Sine-Wave 100 0 25 50 75 100 125 150 175 200 Peak Pulse Derating in Percentage of Peak Power or Current, (%) Ambient Temperature ,T A ɗ 100 Peak Power (kW) Ķ ĵĶı 0 0 ĵııı ĸı 0.2 100 Ķ ĵĶı 0.5 76 ijĹıı ĵı 1 50 Ķ ĵĶı 1.5 33 ijĶıı ĸ 2 23 Ķ ĵĶı 3 13 ijııı IJı 4 10 Fig. 5 - Pulse Waveform Fig. 6 - Typical Junction Capacitance Fig. 3 - Steady State Power Derating Curve Fig. 4 - Peak Pulse Power Rating Curve 100 1000 10000 100 1000 Junction Capacitance,C J (pF) Reverse Breakdown Voltage,V BR (V) Bi-directional @V RWM Uni-directional @V RWM T J =25 °C f=1.0MHz 0.0 0 25 50 75 100 125 150 175 200 Lead Temperature , T L ɗ 100 Peak Pulse Current , (% ) Time , (ms) T J = 25 Ʊ C Pulse Width (td) is defined as the point where the peak current decays to 50 % of Ipp ȝ sec. Waveform as defined by R.E.A. Peak Value (Ipp) Half Value = Ipp td Tr=10 ȝ s Bi-directional @zero bias Uni-directional @zero bias 0.1 0.1 1 10 100 1000 10000 Pulse Width ,t d ȝ P6SMB Series Transient Voltage Suppressors http://www.lgesemi .com mail:lge@lgesemi.comRevision:20170301-P1