P6KE EIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
P6KE SERIES TRANSIENT VOLTAGE SUPPRESSOR VBR : 6.8 - 440 Volts PPK : 600 Watts FEATURES : * 600W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical I R less then 1µA above 10V MECHANICAL DATA * Case : D2A Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed * Polarity : Color band denotes cathode end except Bipolar. * Mounting position : Any * Weight : 0.645 gram DEVICES FOR BIPOLAR APPLICATIONS For Bi-directional use C or CA Suffix Electrical characteristics apply in both directions MAXIMUM RATINGS Rating at 25 °C ambient temperature unless otherwise specified. Rating Symbol Value Unit Peak Power Dissipation at Ta = 25 °C, Tp=1ms (Note1) PPK Minimum 600 Watts Steady State Power Dissipation at TL = 75 °C Lead Lengths 0.375", (9.5mm) (Note 2) PD 5.0 Watts Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 100 Amps. Operating and Storage Temperature Range TJ, TSTG - 65 to + 175 °C Note : (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1 (2) Mounted on Copper Leaf area of 1.57 in2 (40mm2). (3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum. UPDATE : SEPTEMBER 30, 1998 D2A 0.284 (7.20) 0.268 (6.81) 0.161 (4.10) 0.154 (3.90) 0.0400 (1.02) 0.0385 (0.98) Dimensions in inches and (millimeters) 1.00 (25.4) MIN. 1.00 (25.4) MIN.
ELECTRICAL CHARACTERISTICS
Rating at = 25 °C ambient temperature unless otherwise specified Breakdown Voltage @ It Working Peak Maximum Maximum Maximum Maximum ( Note 1 ) Reverse Reverse Leakage Reverse Clamping Temperature TYPE Voltage @ VRWM Current Voltage @ IRSM Co-efficient VBR (V) It VRWM IR IRSM VRSM of VBR Min. Max. (mA) (V) (µA) (A) (V) (% / °C)
Rating at = 25 °C ambient temperature unless otherwise specified Breakdown Voltage @ It Working Peak Maximum Maximum Maximum Maximum ( Note 1 ) Reverse Reverse Leakage Reverse Clamping Temperature TYPE Voltage @ VRWM Current Voltage @ IRSM Co-efficient VBR (V) It VRWM IR IRSM VRSM of VBR Min. Max. (mA) (V) (µA) (A) (V) (% / °C) P6KE120A 114 126 1.0 102 5.0 3.6 165 0.107 P6KE130 117 143 1.0 106 5.0 3.2 187 0.107 P6KE130A 124 137 1.0 111 5.0 3.3 179 0.107 P6KE150 135 165 1.0 121 5.0 2.8 215 0.108 P6KE150A 143 158 1.0 128 5.0 2.9 207 0.108 P6KE160 144 176 1.0 130 5.0 2.6 230 0.108 P6KE160A 152 168 1.0 136 5.0 2.7 219 0.108 P6KE170 153 187 1.0 138 5.0 2.5 244 0.108 P6KE170A 162 179 1.0 145 5.0 2.6 234 0.108 P6KE180 162 198 1.0 146 5.0 2.3 258 0.108 P6KE180A 171 189 1.0 154 5.0 2.4 246 0.108 P6KE200 180 220 1.0 162 5.0 2.1 287 0.108 P6KE200A 190 210 1.0 171 5.0 2.2 274 0.108 P6KE220 198 242 1.0 175 5.0 1.75 344 0.108 P6KE220A 209 231 1.0 185 5.0 1.83 328 0.108 P6KE250 225 275 1.0 202 5.0 1.67 360 0.110 P6KE250A 237 263 1.0 214 5.0 1.75 344 0.110 P6KE300 270 330 1.0 243 5.0 1.40 430 0.110 P6KE300A 285 315 1.0 256 5.0 1.45 414 0.110 P6KE350 315 385 1.0 284 5.0 1.20 504 0.110 P6KE350A 332 368 1.0 300 5.0 1.25 482 0.110 P6KE400 360 440 1.0 324 5.0 1.05 574 0.110 P6KE400A 380 420 1.0 342 5.0 1.10 548 0.110 P6KE440 396 484 1.0 356 5.0 0.95 631 0.110 P6KE440A 418 462 1.0 376 5.0 1.00 602 0.110 Note: ( 1 ) VBR measured after It applied for 300 µs., It = square wave pulse or equivalent. ( 2 ) VF = 3.5 Vmax., IF = 50 Amps. ( 6.8 Volts thru 91 Volts ) VF = 5.0 Vmax., IF = 50 Amps. ( 100 Volts thru 440 Volts ) per 1/2 square or equivalent sine wave. PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. ( 3 ) For Bipolar types moving VR of 10 Volts and under, the IR limit is doubled.
RATING AND CHARACTERISTIC CURVES ( P6KE SERIES ) FIG.1 - PULSE DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 0 25 50 75 100 125 150 175 Ta, AMBIENT TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz FIG.3 - STEADY STATE POWER DERATING FIG.4 - PULSE RATING CURVE FIG.5 - PULSE WAVEFORM 0 1.0 2.0 3.0 4.0 120 5.00 100 120 1.25 3.75 0.1 2.50 1.0 tp, PULSE WIDTH PEAK FORWARD SURGE CURRENT, AMPERES PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT Pp,PEAK POWER (kW) 100 100 10 20 601 2 4 6 40 100 100 125 1750 25 50 75 150 0.1µs 1.0µs 10µs 100µs 10ms1.0ms 200 TL, LEAD TEMPERATURE (°C) 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD PD, STEADY STATE POWER DISSIPATION (WATTS) 100 Tr = 10µs Peak Value IRMS Half Value - IRMS TJ=25 °C Pulse Width (tp) is defined as that point where the peak current decays to 50% of IRSM tp 10X1000 Waveform as defined by R.E.A. T, TIME(ms) PEAK PULSE CURRENT - % IRMS Single Phase Half Wave