P6KE UNSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 7
Technical content
Features
Description
Uni-directional Bi-directional
Applications
Revision March 1,2022 Axial Lead Transient Voltage Suppressors (TVS) www.unsemi.com.tw
6.8 To 600V 600W
www.unsemi.com.tw Cathode Bi-directional Anode Uni-direction For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.1/6 Functional Diagram Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25°C per Fig. 2. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. 4. VF < 3.5V for VBR < 200V and VF< 6.5V for VBR > 201V. 600 See Next Table 5.0 100 3.5/5.0 -55 to +150 -40 to +125 PPPM IPP PM(AV) IFSM VF TJ ,TSTG TOP Peak Pulse Power Dissipation with a 10/1000µs waveform (Fig.1)(Note1), (Note 2) Peak Pulse Current with a 10/1000µs waveform.(Note1,Fig.3) Power dissipation on infinite heatsink at TL = 75℃ Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) Maximum Instantaneous Forward Voltage at 25A for Unidirectional Only (Note 4) Junction and storage temperature range Operating temperature range W A W A V Parameter Symbol Value Unit Maximum Ratings (TA =25℃ unless otherwise noted)
Axial Lead Transient Voltage Suppressors (TVS) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. P6KE Series Electrical Characteristics(TA=25℃ unless otherwise noted) (Continue) Part Number Uni Bi Reverse Stand-Off Voltage VRWM (V) Breakdown Voltage VBR (V) @IT Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Test Current IT (mA) MIN MAX 1000 1000 500 500 200 200 P6KE6.8 P6KE6.8A P6KE7.5 P6KE7.5A P6KE8.2 P6KE8.2A P6KE9.1 P6KE9.1A P6KE10 P6KE10A P6KE11 P6KE11A P6KE12 P6KE12A P6KE13 P6KE13A P6KE15 P6KE15A P6KE16 P6KE16A P6KE18 P6KE18A P6KE20 P6KE20A P6KE22 P6KE22A P6KE24 P6KE24A P6KE27 P6KE27A P6KE30 P6KE30A P6KE33 P6KE33A P6KE36 P6KE36A P6KE39 P6KE39A P6KE43 P6KE43A P6KE47 P6KE47A P6KE51 P6KE51A P6KE56 P6KE56A P6KE62 P6KE62A P6KE68 P6KE68A P6KE75 P6KE75A P6KE82 P6KE82A P6KE6.8C P6KE6.8CA P6KE7.5C P6KE7.5CA P6KE8.2C P6KE8.2CA P6KE9.1C P6KE9.1CA P6KE10C P6KE10CA P6KE11C P6KE11CA P6KE12C P6KE12CA P6KE13C P6KE13CA P6KE15C P6KE15CA P6KE16C P6KE16CA P6KE18C P6KE18CA P6KE20C P6KE20CA P6KE22C P6KE22CA P6KE24C P6KE24CA P6KE27C P6KE27CA P6KE30C P6KE30CA P6KE33C P6KE33CA P6KE36C P6KE36CA P6KE39C P6KE39CA P6KE43C P6KE43CA P6KE47C P6KE47CA P6KE51C P6KE51CA P6KE56C P6KE56CA P6KE62C P6KE62CA P6KE68C P6KE68CA P6KE75C P6KE75CA P6KE82C P6KE82CA 5.5 5.8 6.1 6.4 6.6 7.0 7.4 7.8 8.1 8.6 8.9 9.4 9.7 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 6.12 6.46 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.45 10.80 11.40 11.70 12.35 13.50 14.25 14.40 15.20 16.20 17.10 18.00 19.00 19.80 20.90 21.60 22.80 24.30 25.65 27.00 28.50 29.70 31.35 32.40 34.20 35.10 37.05 38.70 40.85 42.30 44.65 45.90 48.45 50.40 53.20 55.80 58.90 61.20 64.60 67.50 71.25 73.80 77.90 7.48 7.14 8.25 7.88 9.02 8.61 10.01 9.56 11.00 10.50 12.10 11.55 13.20 12.60 14.30 13.65 16.50 15.75 17.60 16.80 19.80 18.90 22.00 21.00 24.20 23.10 26.40 25.20 29.70 28.35 33.00 31.50 36.30 34.65 39.60 37.80 42.90 40.95 47.30 45.15 51.70 49.35 56.10 53.55 61.60 58.80 68.20 65.10 74.80 71.40 82.50 78.75 90.20 86.10 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 89.0 85.0 98.0 92.0 108.0 103.0 118.0 113.0 55.56 57.14 51.28 53.10 48.00 49.59 43.48 44.78 40.00 41.38 37.04 38.46 34.68 35.93 31.58 32.97 27.27 28.30 25.53 26.67 22.64 23.81 20.62 21.66 18.81 19.61 17.29 18.07 15.35 16.00 13.79 14.49 12.58 13.13 11.54 12.02 10.64 11.13 9.69 10.12 8.85 9.26 8.16 8.56 7.45 7.79 6.74 7.06 6.12 6.52 5.56 5.83 5.08 5.31
Axial Lead Transient Voltage Suppressors (TVS) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.3/6 P6KE Series Electrical Characteristics(TA=25℃ unless otherwise noted) (Continue) Part Number Uni Bi Reverse Stand-Off Voltage VRWM (V) Breakdown Voltage VBR (V) @IT Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Test Current IT (mA) MIN MAX Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double P6KE91 P6KE91A P6KE100 P6KE100A P6KE110 P6KE110A P6KE120 P6KE120A P6KE130 P6KE130A P6KE150 P6KE150A P6KE160 P6KE160A P6KE170 P6KE170A P6KE180 P6KE180A P6KE200 P6KE200A P6KE220 P6KE220A P6KE250 P6KE250A P6KE300 P6KE300A P6KE350 P6KE350A P6KE380 P6KE380A P6KE400 P6KE400A P6KE440 P6KE440A P6KE480A P6KE500 P6KE500A P6KE530 P6KE530A P6KE550 P6KE550A P6KE600 P6KE600A P6KE91C P6KE91CA P6KE100C P6KE100CA P6KE110C P6KE110CA P6KE120C P6KE120CA P6KE130C P6KE130CA P6KE150C P6KE150CA P6KE160C P6KE160CA P6KE170C P6KE170CA P6KE180C P6KE180CA P6KE200C P6KE200CA P6KE220C P6KE220CA P6KE250C P6KE250CA P6KE300C P6KE300CA P6KE350C P6KE350CA P6KE380C P6KE380CA P6KE400C P6KE400CA P6KE440C P6KE440CA P6KE480CA P6KE500C P6KE500CA P6KE530C P6KE530CA P6KE550C P6KE550CA P6KE600C P6KE600CA 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102.0 105.0 111.0 121.0 128.0 130.0 136.0 138.0 145.0 146.0 154.0 162.0 171.0 175.0 185.0 202.0 214.0 243.0 256.0 284.0 299.3 308.6 324.9 324.8 342.0 357.3 376.2 411.0 406.0 427.5 432.2 454.0 446.6 470.3 487.2 513.0 81.90 86.45 90.00 95.00 99.00 10450 108.00 114.00 117.00 123.50 135.00 142.50 144.00 152.00 153.00 161.50 162.00 171.00 180.00 190.00 198.00 209.00 225.00 237.50 270.00 285.00 315.00 332.50 342.00 361.00 360.00 380.00 396.00 418.00 456.00 450.00 475.00 498.00 530.50 495.00 522.50 540.00 570.00 100.10 95.55 110.00 105.00 121.00 115.50 132.00 126.00 143.00 136.50 165.00 157.50 176.00 168.00 187.00 178.50 198.00 189.00 220.00 210.00 242.00 231.00 275.00 262.50 330.00 315.00 385.00 367.50 418.00 399.00 440.00 420.00 484.00 462.00 504.00 550.00 525.00 582.00 556.50 605.00 577.50 660.00 630.00 4.58 4.80 4.17 4.38 3.80 3.95 3.47 3.64 3.21 3.35 2.79 2.90 2.61 2.74 2.46 2.56 2.33 2.44 2.09 2.19 1.74 1.83 1.67 1.74 1.40 1.45 1.19 1.24 1.10 1.14 1.05 1.09 0.95 0.99 0.90 0.83 0.87 0.85 0.90 0.76 0.79 0.69 0.72 131.0 125.0 144.0 137.0 158.0 152.0 173.0 165.0 187.0 179.0 215.0 207.0 230.0 219.0 244.0 234.0 258.0 246.0 287.0 274.0 344.0 328.0 360.0 344.0 430.0 414.0 504.0 482.0 547.2 524.4 576.0 552.0 633.6 607.2 651.1 720.0 690.0 762.8 731.0 792.0 759.0 864.0 828.0
Axial Lead Transient Voltage Suppressors (TVS) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. P6KE Series Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve Figure 3 - Pulse Waveform Figure 4 - Typical Junction Capacitance Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Surge Current 0 25 50 75 100 125 150 175 100 TA-Ambient temperature(°C) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 150 100 IPPM - Peak Pulse Current, % IRSM tr=10 sec Peak Value IPPM Half Value IPPM (IPPM/2) tc 10/1000 sec. Waveform as defined by R.E.A 0 1.0 2.0 3.0 4.0 TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM t - Time (ms) 100 td - Pulse Width (µs) PPPM - Peak Pulse Power (kW) 0.1 0.1 1 10 100 1000 10000 1.0 10.0 100.0 1000.0 10000 1000 100 VBR-Reverse Breakdown Voltage (V) Cj (pF) Tj=25°C f=1.0MHz Vsig=50mVp-p Bi-directional @zero bins Uni-directional @zero bins Uni-directional @VRWM Bi-directional @VRWM 5.0 0 25 50 75 100 125 150 175 200 4.0 3.0 2.0 1.0 0.0 TL - Lead Temperature(°C) PM(AV), Steady State Power Dissipation (W) Number of Cycles at 60Hz IFSM-Peak Forward Surge Current (A) 1 10 100 100 TJ=TJ max. 8.3 ms Single Half Sine-Wave
Axial Lead Transient Voltage Suppressors (TVS) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.5/6 P6KE Series Lead–free assembly 150°C 200°C 60 -180 Seconds 3°C/Second max 3°C/Second max 217°C 60 -150 Seconds 260 +0/-5°C 20-40 Seconds 6°C/Second Max 8 minutes Max 280°C Reflow Condition Pre Heat -Temperature Min (Ts(min)) -Temperature Max (Ts(max)) - Time (min to max) (TS) Average ramp up rate ( Liquidus Temp TL) to peak TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Time (min to max) (TS) Peak Temperature (TP) Do not exceed Time 25°C to peak Temperature (TP) Time within 5°C of actual peak Temperature (TP) Ramp-down Rate TimeTime to peak temperature ( T25℃ to peak) Preheat Ts(min) Ts(max) TL TL TP Temperature Ramp-up Ramp-down Critical Zone TL toTP TP Ts I-V Curve Characteristics V VC VBR VR IR VFIT IPP Uni-directional VVC VBR VR VCVBRVR IR IR IT IT IPP IPP Bi-directional Physical Specifications Environmental Specifications Weight Case Polarlty Terminal Color band denotes cathode except Bipolar JESD22-A104 JESD22-A102 JESD22-A103 JESD22-A108 JESD22-A106 Temperature Cycle Pressure Cooker High Temp. Storage HTRB Thermal Shock 0.015 ounce, 0.4 gram JEDEC DO-204AC(DO-15) Molded Plastic over glass passivated junction Matte Tin-plated leads, Solderable per JESD22-B102D
Axial Lead Transient Voltage Suppressors (TVS) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. P6KE Series Packaging Dimensions Unit: Inches (Millimeters) K E C A 0.20±0.020 (5.00±0.508) xxxP 6 2.56 (65.00) 0.25 (6.35) DO-204AC (DO-15) Dimensions Dimensions A B C D Min Max MaxMin Inches Millimeters 1.000 0.230 0.028 0.102 0.300 0.033 0.142 25.40 5.85 0.71 2.60 7.63 0.84 3.61 5% VBR VOLTAGE TOLERANCE BI-DIRECTIONAL VBR VOLTAGE SERIES
Ordering Information
Part Number Component Package Quantity Packaging Option P6KEXXXXX DO-204AC (DO-15) 2
000 BOX
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Disclaimer ROHS UNSEMI RESERVES THE RIGHT TO MAKE CHANGE ON OUR PRODUTS , PRODUCTS SPECIFICATION AND DATA WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. UN SEMICONDUCTOR LIMITED its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “UNSEMI”)does not give any representations or warranties for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. In no event shall UNSEMI be liable for any indirect, incidental, punitive, special or consequential damages (including any and all implied warranties, warranties of fitness for particular purpose, non-infringement and merchantability.) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Statements regarding the suitability of products for certain types of applications are based on UNSEMI knowledge of typical requirements that are often placed on UNSEMI products in generic applications. Such statements are not binding, statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify UNSEMI's terms and conditions of purchase, including but not limited to the warranty expressed therein. Unless otherwise agreed in writing, UNSEMI product is not designed, authorized or warranted to be suitable for use in medical life-saving, or life-sustaining application , nor in applications where failure or malfunction of a UNSEMI product can reasonably be expected to result in personal injury, death or severe property or environmental damage. UNSEMI and its suppliers accept no liability for inclusion or use of UNSEMI products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. All referenced brands, product names, service names and trademarks are the property of their respective owners.