P6KE SYNSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
P6KE SERIES TRANSIENT VOLTAGE SUPPRESSOR VBR : 6.8 - 440 Volts PPK : 600 Watts FEATURES : * 600W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to V BR(min.) * Typical I R less then 1µA above 10V MECHANICAL DATA * Case : D2A Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed * Polarity : Color band denotes cathode end except Bipolar. * Mounting position : Any * Weight : 0.645 gram MAXIMUM RATINGS Rating at 25 °C ambient temperature unless otherwise specified. Rating Symbol Value Unit Peak Power Dissipation at Ta = 25 °C, Tp=1ms (Note1) PPK Minimum 600 W Steady State Power Dissipation at T L = 75 °C Lead Lengths 0.375", (9.5mm) (Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) (Note 3) Operating and Storage Temperature Range TJ, TSTG - 65 to + 175 °C (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1 (2) Mounted on Copper Leaf area of 1.57 in2 (40mm2). (3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum. Page 1 of 3 Rev. 02 : January 28, 2004 IFSM PD 5.0 W A100 Notes : D2A 0.284 (7.20) 0.268 (6.81) 0.161 (4.10) 0.154 (3.90) 0.0400 (1.02) 0.0385 (0.98) Dimensions in inches and (millimeters) 1.00 (25.4) MIN. 1.00 (25.4) MIN.
ELECTRICAL CHARACTERISTICS
Rating at 25°C ambient temperature unless otherwise specified Breakdown Voltage @ It Working Peak Maximum Maximum Maximum Maximum ( Note 1 ) Reverse Reverse Leakage Reverse Clamping Temperature Voltage @ VRWM Current Voltage @ IRSM Co-efficient VBR (V) It VRWM IR IRSM VRSM of VBR Min. Max. (mA) (V) (µA) (A) (V) (% /°C) P6KE120A P6KE120CA 114 126 1.0 102 5.0 3.6 165 0.107 P6KE130A P6KE130CA 124 137 1.0 111 5.0 3.3 179 0.107 P6KE150A P6KE150CA 143 158 1.0 128 5.0 2.9 207 0.108 P6KE160A P6KE160CA 152 168 1.0 136 5.0 2.7 219 0.108 P6KE170A P6KE170CA 162 179 1.0 145 5.0 2.6 234 0.108 P6KE180A P6KE180CA 171 189 1.0 154 5.0 2.4 246 0.108 P6KE200A P6KE200CA 190 210 1.0 171 5.0 2.2 274 0.108 P6KE220A P6KE220CA 209 231 1.0 185 5.0 1.83 328 0.108 P6KE250A P6KE250CA 237 263 1.0 214 5.0 1.75 344 0.110 P6KE300A P6KE300CA 285 315 1.0 256 5.0 1.45 414 0.110 P6KE320A P6KE320CA 303 337 1.0 272 5.0 1.35 445 0.110 P6KE350A P6KE350CA 332 368 1.0 300 5.0 1.25 482 0.110 P6KE400A P6KE400CA 380 420 1.0 342 5.0 1.10 548 0.110 P6KE440A P6KE440CA 418 462 1.0 376 5.0 1.00 602 0.110 Notes: ( 1 ) VBR measured after It applied for 300 µs., It = square wave pulse or equivalent. ( 2 ) VF = 3.5 Vmax., IF = 50 Amps. ( 6.8 Volts thru 91 Volts ) VF = 5.0 Vmax., IF = 50 Amps. ( 100 Volts thru 440 Volts ) per 1/2 square or equivalent sine wave. PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. ( 3 ) For Bipolar types moving VR of 10 Volts and under, the IR limit is doubled. ( 4 ) "6KE" will be omitted in marking on the diode. Page 2 of 3 Rev. 02 : January 28, 2004 Type No. Uni-directional Bi-directional
RATING AND CHARACTERISTIC CURVES ( P6KE SERIES ) FIG.1 - PULSE DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 0 25 50 75 100 125 150 175 Ta, AMBIENT TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz FIG.3 - STEADY STATE POWER DERATING FIG.4 - PULSE RATING CURVE FIG.5 - PULSE WAVEFORM 0 1.0 2.0 3.0 4.0 Page 3 of 3 Rev. 02 : January 28, 2004 120 5.00 100 120 1.25 3.75 0.1 2.50 1.0 tp, PULSE WIDTH PEAK FORWARD SURGE CURRENT, AMPERES PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT Pp,PEAK POWER (kW) 100 100 10 20 601 2 4 6 40 100 100 125 1750 25 50 75 150 0.1µs 1.0µs 10µs 100µs 10ms1.0ms 200 TL, LEAD TEMPERATURE (°C) 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD PD, STEADY STATE POWER DISSIPATION (WATTS) 100 Tr = 10µs Peak Value IRMS Half Value - IRMS TJ=25 °C Pulse Width (tp) is defined as that point where the peak current decays to 50% of IRSM tp 10X1000 Waveform as defined by R.E.A. T, TIME(ms) PEAK PULSE CURRENT - % IRMS Single Phase Half Wave