P6KE130A MULTICOMP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

  • Exceeds environmental standards of MIL-STD-19500
  • 600W surge capability at 10 × 1,000μs waveform, duty cycle: 0.01%
  • Excellent clamping capability
  • Low zener impedance
  • Fast response time: typically less than 1ps from 0V to VBR for unidirectional and 5ns for bidirectional
  • Typical IR less than 1μA above 10 V
  • High temperature soldering guaranteed: 260°C / 10 seconds / 0.375 Inched (9.5mm) lead length/5lbs. (2.3kg) tension
  • Case style: DO-204AC (DO-15) molded plastic Mechanical Data Case : Molded plastic Lead : Pure tin plated lead free, solderable per MIL-STD-202, Method 208 Polarity : Colour band denotes cathode except bipolar Weight : 0.42g Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristics Symbol Values Unit Peak Power Dissipation at Ta = 25°C, Tp = 1ms (Note 1) Ppk Min. 600 WattsSteady State Power Dissipation at Tl = 75°C Lead Lengths 0.375 Inch 9.5 mm (Note 2) Pd 5 Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 3) Ifsm 100 Amps Maximum Instantaneous Forward Voltage at 50A for Unidirectional Only (Note 4) Vf 3.5 / 5 Volts Operating and Storage Temperature Range Tj, TsTg -55 to +175 °C Notes : 1. Non-repetitive current pulse ,per Fig. 5 and derated above Ta = 25°C per Fig. 1 . 2. 8.3ms single half-wave duty cycle = 4 pulses per minutes maximum (uni-directional units only). 3. Vf = 3.5V on P6KE6.8 thru P6KE130 devices and Vf = 5V on P6KE220A thru P6KE400A devices. DO-204AC (DO-15)

Page <2> V1.030/03/20 Transient Voltage Suppression Diodes P6KE Series, 600W Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Ratings and Characteristic Curves

Page <3> V1.030/03/20 Transient Voltage Suppression Diodes P6KE Series, 600W Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Electrical Characteristics (Ta = 25°C unless otherwise noted) Part Number Reverse Standoff Voltage Breakdown Voltage BV Lolts @ lt Max. Reverse Leakage Max. Clamping Voltage @IP Max. Peak Pulse Current Max. Voltage Temp. Variation of BV Unidirectional Bidirectional VR(V) Min. (V) Max. (V) It (mA) IR(µA) Vc(V) Ipp(A) % / °C P6KE130A P6KE130CA 111 124 137 1 5 179 3.3 0.107 Notes: Suffix’C’ denotes bidirectional device . Suffix’A’ denotes 5% tolerance device. No suffix denotes 10% tolerance devive. 1. For bidirectional devices having VR of 10volts and under ,the IR limit is doubled . Description Part Number TVS Diode, 600W, 6.8Vbr Nom, Unidirectional, DO-204AC (DO-15) P6KE6.8A TVS Diode, 600W, 6.8Vbr Nom, Bidirectional, DO-204AC (DO-15) P6KE6.8CA TVS Diode, 600W, 43Vbr Nom, Unidirectional, DO-204AC (DO-15) P6KE43A TVS Diode, 600W, 43Vbr Nom, Bidirectional, DO-204AC (DO-15) P6KE43CA TVS Diode, 600W, 56Vbr Nom, Bidirectional, DO-204AC (DO-15) P6KE56CA TVS Diode, 600W, 130Vbr Nom, Unidirectional, DO-204AC (DO-15) P6KE130A TVS Diode, 600W, 130Vbr Nom, Bidirectional, DO-204AC (DO-15) P6KE130CA Part Number Table Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.