DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
www.anova-semi.com Revision: B Nov-22 -2012 P. 1 Breakdown Voltage: 6.8 to 600 V Peak Pulse Power: 600 W Note: (3)VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V (1)Non-repetitive current pulse per Fig.5 and derated above TA= 25 °C per Fig.1 (2)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum Maximum instantaneous forward voltage at 50 A for unidirectional only(3) VF 3.5/5.0 V Operating junction and storage temperature range TJ, TSTG - 55 to +150 °C Power dissipation on infinite heatsink at TL = 75 °C PD 5.0 W Peak forward surge current, 8.3 ms single half sine-wave unidirectional only (2) IFSM 100 A Peak power dissipation with a 10/1000μs waveform(1) PPP 600 W Peak pulse current with a 10/1000μs waveform(1) IPP See Next Table A except Bipolar Mounting position: Any Maximum Ratings(TA=25℃ unless otherwise noted) Parameter Symbol Value Unit Polarity: Color band denotes cathode end Mechanical Data Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Solderable per MIL-STD-202, method 208 guranteed RoHS compliant Axial Lead Transient Voltage Suppressors Features DO-15 Glass passivated chip
600 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional unit Excellent clamping capability Very fast response time 0.033 0.028 [ 0.84 0.71 0.142 0.102 [ 3.61 2.60] MIN MIN DIA. DIA. Dimensions : inch [ mm ] 0.300 0.230 [ 7.63 5.85] 1.000 [25.40] 1.000 [25.40]
www.anova-semi.com Revision: B Nov-22 -2012 P. 2 AMBIENT TEMPERATURE , (℃)AVERAGE FORWARD CURRENT, (A) 0 100 1 100 25 100 100 22 150 0 0 5 0.1 30 73 5 #### 0.22 ## 0 5 450 0 0 4000 70 0.2 100 5 450 0.5 76 2800 40 1 50 5 450 1.5 33 2500 7 2 23 5 450 3 13 2000 10 4 10 Fig. 5 - Pulse Waveform Fig. 6 - Typical Junction Capacitance Ratings and Characteristics Curves (TA=25℃ unless otherwise noted) Fig. 1 - Pulse Derating Curve Fig. 2 - Maximum Non-Repetitive Surge Current Fig. 3 - Steady State Power Derating Curve Fig. 4 - Peak Pulse Power Rating Curve 100 1000 10000 1 10 100 1000 Junction Capacitance,CJ (pF) Reverse Breakdown Voltage,VBR (V) Bi-directional @VRWM Uni-directional @VRWM TJ=25 °C f=1.0MHz 0.0 1.0 2.0 3.0 4.0 5.0 0 25 50 75 100 125 150 175 200 Steady State Power Dissipation, (W) Lead Temperature , TL (℃) 100 1 10 100 Peak Forward Surge Current, (A) Number of Cycles at 60 Hz TJ = TJ max. 8.3 ms Single Half Sine-Wave 100 0 25 50 75 100 125 150 175 200 Peak Pulse Derating in Percentage of Peak Power or Current,( %) Ambient Temperature ,TA (℃) 100 0 1 2 3 4 Peak Pulse Current , (% ) Time , (ms) TJ = 25 °C Pulse Width (td) is defined as the point where the peak current decays to 50 % of Ipp 10/1000 μsec. Waveform as defined by R.E.A. Peak Value (Ipp) Half Value = Ipp td Tr=10μs Bi-directional @zero bias Uni-directional @zero bias 0.1 100 0.1 1 10 100 1000 10000 Pulse Width ,td (μs) Peak Power (kW)
www.anova-semi.com Revision: B Nov-22 -2012 P. 3 Min (V) Max (V) IT (mA) Note: 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device Electrical Characteristics(TA=25℃ unless otherwise noted) Part Number (Uni) Part Number (Bi) Breakdown Voltage VBR @IT Maximum Reverse Leakage IR @VRWM (uA) Working Peak Reverse Voltage VRWM (V) Maximum Reverse Surge Current IPP (A) Maximum Clamping Voltage VC @IPP (V)
www.anova-semi.com Revision: B Nov-22 -2012 P. 4 Min (V) Max (V) IT (mA) Electrical Characteristics(TA=25℃ unless otherwise noted) Part Number (Uni) Part Number (Bi) Breakdown Voltage VBR @IT Maximum Reverse Leakage IR @VRWM (uA) Working Peak Reverse Voltage VRWM (V) Maximum Reverse Surge Current IPP (A) Maximum Clamping Voltage VC @IPP (V)