DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
SIDACtor® Protection Thyristors 166 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Baseband Protection (Voice-DS1) SIDACtor® Series - Modified TO-220
Electrical Characteristics
The SIDACtor® Series Modified TO-220 are designed to protect baseband equipment from damaging overvoltage transients. The series provides a robust single port through-hole solution that enables voice though DS-1 equipment to comply with various global regulatory standards.
Description
Features and Benefits t Low voltage overshoot t Low on-state voltage t Does not degrade with use t Modified TO-220 Package t Fails short circuit when surged in excess of ratings t Single-port protection t Lead forms available (T) (R) (G) Agency Approvals Agency Agency File Number E133083 Schematic Symbol Pinout Designation PIN 1 PIN 2 PIN 3 Applicable Global Standards t5*"" t5*"# t*56,&OIBODFE Level* t*56,#BTJD-FWFM t(3*OUFSCVJMEJOH t(3*OUSBCVJMEJOH t*&$ t:%5 t:%5 t:%5 *A/B-rated parts require series resistance Part Number Marking VDRM @lDRM=5μA VS @100V/μs VDRM @lDRM=5μA VS @100V/μs VT @IT=2.2 A IH IS IT Capacitance @1MHz, 2V bias V min V max V min V max V max mA min mA max A max pF min pf max Pins 1-2, 3-2 Pins 1-3 Pins 1-2, 3-2 P0602AALxx P0602AA 25 40 50 80 4 50 800 2.2 See Capacitance Values Table P1402AALxx P1402AA 58 77 116 154 4 150 800 2.2 P1602AALxx P1602AA 65 95 130 190 4 150 800 2.2 P2202AALxx P2202AA 90 130 180 260 4 150 800 2.2 P2702AALxx P2702AA 120 160 240 320 4 150 800 2.2 P3002AALxx P3002AA 140 180 280 360 4 150 800 2.2 P3602AALxx P3602AA 170 220 340 440 4 150 800 2.2 P4202AALxx P4202AA 190 250 380 500 4 150 800 2.2 P4802AALxx P4802AA 220 300 440 600 4 150 800 2.2 P6002AALxx P6002AA 275 350 550 700 4 150 800 2.2 T able continues on next page.
SIDACtor® Protection Thyristors 167 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Baseband Protection (Voice-DS1) Capacitance Values Part Number pF Pin 1-2, 3-2 Tip-Ground, Ring-Ground pF Pin 1-3 Tip-Ring MIN MAX MIN MAX P0602ACLxx 25 250 10 145 P1402ACLxx 55 155 30 90 P1602ACLxx 45 145 25 85 P2202ACLxx 45 115 25 65 P2702ACLxx 40 105 20 60 P3002ACLxx 35 95 20 55 P3602ACLxx 35 90 15 50 P4202ACLxx 30 85 15 50 P4802ACLxx 30 85 15 50 P6002ACLxx 30 80 15 45 Part Number Marking VDRM @lDRM=5μA VS @100V/μs VDRM @lDRM=5μA VS @100V/μs VT @IT=2.2 A IH IS IT CapacitanceV min V max V min V max V max mA min mA max A maxPins 1-2, 3-2 Pins 1-3 Pins 1-2, 3-2 P0602ABLxx P0602AB 25 40 50 80 4 50 800 2.2 See Capacitance Values Table P1402ABLxx P1402AB 58 77 116 154 4 150 800 2.2 P1602ABLxx P1602AB 65 95 130 190 4 150 800 2.2 P2202ABLxx P2202AB 90 130 180 260 4 150 800 2.2 P2702ABLxx P2702AB 120 160 240 320 4 150 800 2.2 P3002ABLxx P3002AB 140 180 280 360 4 150 800 2.2 P3602ABLxx P3602AB 170 220 340 440 4 150 800 2.2 P4202ABLxx P4202AB 190 250 380 500 4 150 800 2.2 P4802ABLxx P4802AB 220 300 440 600 4 150 800 2.2 P6002ABLxx P6002AB 275 350 550 700 4 150 800 2.2 P0602ACLxx P0602AC 25 40 50 80 4 50 800 2.2 P1402ACLxx P1402AC 58 77 116 154 4 150 800 2.2 P1602ACLxx P1602AC 65 95 130 190 4 150 800 2.2 P2202ACLxx P2202AC 90 130 180 260 4 150 800 2.2 P2702ACLxx P2702AC 120 160 240 320 4 150 800 2.2 P3002ACLxx P3002AC 140 180 280 360 4 150 800 2.2 P3602ACLxx P3602AC 170 220 340 440 4 150 800 2.2 P4202ACLxx P4202AC 190 250 380 500 4 150 800 2.2 P4802ACLxx P4802AC 220 300 440 600 4 150 800 2.2 P6002ACLxx P6002AC 275 350 550 700 4 150 800 2.2 Part Number pF Pin 1-2, 3-2 Tip-Ground, Ring-Ground pF Pin 1-3 Tip-Ring MIN MAX MIN MAX P0602AALxx 15 145 10 90 P1402AALxx 40 60 20 35 P1602AALxx 35 60 20 35 P2202AALxx 30 50 15 30 P2702AALxx 25 45 15 25 P3002AALxx 25 40 15 25 P3602AALxx 25 35 10 20 P4202AALxx 25 35 10 20 P4802AALxx 20 35 10 20 P6002AALxx 20 35 10 20 P0602ABLxx 15 250 10 145 P1402ABLxx 40 155 20 90 P1602ABLxx 35 145 20 85 P2202ABLxx 30 115 15 65 P2702ABLxx 25 105 15 60 P3002ABLxx 25 95 15 55 P3602ABLxx 25 90 10 50 P4202ABLxx 25 85 10 50 P4802ABLxx 20 85 10 50 P6002ABLxx 20 80 10 45 Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias. Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are bi-directional (unless otherwise noted). - XX Part Number Suffix: ‘RP’ (Reel Pack), Blank (Bulk Pack), or ‘60’ (Type 60 lead form bulk pack) Electrical Characteristics (continued)
SIDACtor® Protection Thyristors 168 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Baseband Protection (Voice-DS1) Package Symbol Parameter Value Unit Modified TO-220 PIN 1 PIN 2 PIN 3 TJ Operating Junction Temperature Range UP TS Storage Temperature Range UP R0JA Thermal Resistance: Junction to Ambient 60 °C/W Thermal Considerations IH IT IS IDRM VDRMVT +V-V VS 100 tr td Peak Value Half Value t – Time (μs) IPP – Peak Pulse Current – %I PP tr = rise time to peak value td = decay time to half value Waveform = t r x td V-I Characteristics tr x td Pulse Waveform 25°C Case Temperature (TC) - ºC 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 Ratio of IH IH (TC = 25ºC) Normalized VS Change vs. Junction T emperature Normalized DC Holding Current vs. Case T emperature Surge RatingsSeries IPP ITSM 50/60 Hz di/dt0.2x310 1 0.5x700 2 2x10 1 2x10 2 8x20 1 1.2x50 2 10x160 1 10x160 2 10x560 1 10x560 2 5x320 1 9x720 2 10x360 1 10x360 2 10x1000 1 10x1000 2 5x310 1 10x700 2 A min A min A min A min A min A min A min A min A min A min A/μs max A 2 01 5 0 1 5 09 0 5 07 57 5 4 5 7 52 0 5 0 0 B 25 250 250 150 100 100 125 80 100 25 500 C 50 500 400 200 150 200 175 100 200 50 500 Notes:
1 Current waveform in μs
2 Voltage waveform in μs
- Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP - The device must initially be in thermal equilibrium with -40°C < TJ < -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C Percent of VS Change – % 25 °C
SIDACtor® Protection Thyristors 169 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Baseband Protection (Voice-DS1) Soldering Parameters Physical Specifications Environmental Specifications Lead Material Copper Alloy T erminal Finish 100% Matte-Tin Plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Part Numbering CONSTRUCTION VARIABLE PACKING OPTIONS IPP RATING RoHS COMPLIANT TYPE P = SIDACtor P xLx x MEDIAN VOLTAGE PACKAGE TYPE xxx 2 A Blank: Bulk RP: Reel Pack 60: Type 60 Lead Form (Special order item. For type 60 orders, contact factory) Time T emper ature TP TL TS(max) TS(min) tP tL tS time to peak temperature (t 25ºC to peak) Ramp-down Ramp-up Preheat Critical Zone TL to TP Figure 1 High T emp Voltage Blocking 80% Rated VDRM (VAC Peak ¡$PS 504 or 1008 hrs. MIL -STD-750 (Method 1040) JEDEC, JESD22-A-101 T emp Cycling ¡$UP NJOEXFMM VQUP cycles. MIL -STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased T emp & Humidity 52 V DC VQUPIST&*" JEDEC, JESD22-A-101 High T emp Storage ¡$IST.*-45% .FUIPE JEDEC, JESD22-A-101 Low T emp Storage -65°C, 1008 hrs. Thermal Shock ¡$UP NJOEXFMM TFDUSBOTGFS 10 cycles. MIL -STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker T est) BUN VQUPIST&*" JEDEC, JESD22-A-102 Resistance to Solder Heat TFDT.*-45% .FUIPE Moisture Sensitivity Level IST SFnPXDZDMFT ¡$1FBL +&%&$+45% -FWFM Reflow Condition Pb-Free assembly (see Fig. 1) Pre Heat - Temperature Min (Ts(min)) - Temperature Max (Ts(max)) - Time (Min to Max) (ts) 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) - Temperature (tL) 60-150 secs. Peak Temp (TP) Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed Part Marking xxxxx XXXXXXXXX Part Marking Code (Refer to Electrical Characteristics Table) Date Code
SIDACtor® Protection Thyristors 170 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Baseband Protection (Voice-DS1) Packing Options Package Type Description Quantity Added Suffix Industry Standard A Modified TO-220 Tape and Reel Pack 700 RP EIA-468-B Modified TO-220 Bulk Pack 500 N/A N/A Modified TO-220 Type 60 Lead Form Bulk Pack 500 (special order item, contact factory for details) N/A T ape and Reel Specification — Modified TO-220 1.626 (41.15) 0.720 (18.29) 0.360 (9.14) 0.240 (6.10) 0.019 (0.5) 0.750 ± 0.010 (19.05 ± 0.25) 0.500 (12.7) 0.100 (2.54) 0.100 (2.54) 14.173 (360.0) Dimensions are in inches (and millimeters). 1.968 (50.0) Direction of Feed Dimensions - Modified TO-220 D F PG A O Temperat ure Measurement Poi n t PIN 3 PIN 2 PIN 1 J H L K M N The modified TO-220 package is designed to meet mechanical standards as set forth in JEDEC publication number 95. Inches Millimeters Min Max Min Max A 0.400 0.410 10.16 10.42 D 0.360 0.375 9.14 9.53 F 0.110 0.130 2.80 3.30 G 0.540 0.575 13.71 14.61 H 0.025 0.035 0.63 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1 .52 1 .90 M 0.070 0.085 1 .78 2.16 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.290 0.310 7 .37 7 .87