P5097 ETAL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
ETALDOC 778/5 Page 1 of 4 June 2005 PRODUCT DATA SHEET LOW DISTORTION P5097 LINE MATCHING TRANSFORMER Features Applications ∗ Lead-free (Pb-free) ∗ V.90 and V.92 Modems ∗ RoHS compliant ∗ V.34 Modems ∗ Low Distortion ∗ 11mm (0.43”) Seated Height ∗ Industry Standard Pinout ∗ IEC 60950 and UL 60950 Certified ∗ UL Recognized Component ∗ Extended Frequency Response ∗ Flat TX and RX Responses ∗ High Thermal Stability ∗ Directly replaces 82097
DESCRIPTION
P5097 is intended for low cost V.90 and V.92 (56kbps) modems and other high-speed applications where low distortion at moderate power levels and very low voiceband frequencies is required. P5097 is offered as a direct replacement for 82097 in existing circuits without changes to matching components. P5097 exhibits stable core characteristics over its operating temperature range to maximize data throughput under varying environmental conditions without the need for modem retraining. P5097 uses patented design and construction methods to achieve excellent signal performance and safety isolation to international standards. The part is completely lead-free, compliant with RoHS Directive 2002/95/EC, and suitable for lead-free and conventional processing. P5097 is certified to IEC 60950 and UL 60950. P5097 is a UL Recognized Component and is supported by an IEC CB certificate. Patented FOR NEW DESIGNS P5056 IS RECOMMENDED
ETALDOC 778/5 Page 2 of 4 June 2005 SPECIFICATIONS Electrical At T = 25ºC and as circuit Fig. 2 unless otherwise stated. Parameter Conditions Min Typ Max Units Insertion Loss f = 2kHz, RL = 600Ω - - 2.0 dB Frequency Response LF -3dB cutoff HF -3dB cutoff 100Hz – 4kHz ±0.1 Hz kHz dB Return Loss(5) 200Hz – 4kHz 20 - - dB Transhybrid Loss(5) 200Hz – 4kHz - - - dB Third Harmonic Distortion(1) 150Hz -3dBm in line - - -76 dBm Balance DC – 5kHz Method TG 25 80 - - dB Voltage Isolation(2) 50Hz DC 2.12 3.0 kVrms kV Operating Range: Functional Storage -40 +70 +85 ºC ºC Lumped equivalent circuit parameters as Fig. 1 DC resistance (3) RDC Primary resistance R DCp Secondary resistance RDCs 120 117 149 143 Ω Ω Leakage inductance, ΔL 3.5 4.5 5.5 mH Shunt inductance, Lp(4) 200Hz 10mV 8 - - H Shunt loss, Rp 200Hz 10mV 15 - - kΩ Notes: 1. Third harmonic typically exceeds other harmonics by 10dB. 2. Components are 100% tested at 3.25kVDC. 3. Caution: do not pass DC through windings. Telephone line current must be diverted using semiconductor line hold circuit or choke. 4. At signal levels greater than 100mV, Lp will increase and Rp will decrease slightly but the effect is usually favourable to the return loss characteristic. 5. Return loss and transhybrid loss can be improved to 30dB in improved matching circuit. The values shown relate to the simplest configuration, Fig. 2. E quivalent Circuit Fi g . 1 IDEAL 1:1 ½ L ½ L
ETALDOC 778/5 Page 3 of 4 June 2005 CONSTRUCTION Dimensions shown are in millimetres (inches). Geometric centres of outline and pin grid coincide within a tolerance circle of 0.6mmØ. Windings may be used interchangeably as primary or secondary. Total weight typically 5.5g. Patented μ22 F
600 R eferenc e CircuitΩ
Fi g . 2 LINE 600 360 TXA2 TXA1 ConnectionsDimensions Fig 3 IDENT Pin Ø 0.70mm (0.028) max F inish: S nAg over Ni barrier. JE SD97 category = e2. NOT ES: Dimension “A ” : 3.2 to 3.7mm (0.125 - 0.145)
ETALDOC 778/5 Page 4 of 4 June 2005 SAFETY CERTIFICATION Constructed in accordance with IEC 60950-1, EN 60950-1 and UL 60950-1, supplementary insulation for a primary circuit, 250Vrms maximum working voltage, flammability class V-1. Certified under the IEC CB scheme (Certificate GB597W) to IEC 60950 Third Edition 1999 sub- a maximum working voltage of 250Vrms, nominal mains supply voltage not exceeding 300Vrms and a maximum operating temperature of +85ºC in Pollution Degree 2 environment, supplementary insulation for a primary circuit. Recognized under the Component Recognition Program of Underwriters Laboratories Inc. to US and Canadian requirements CAN/CSA C22.2 No. 60950-1-03/UL60950-1, First Edition, based on IEC 60950-1, First Edition, maximum working voltage 250Vrms, Pollution Degree 2, supplementary insulation. UL File number E203175. Additionally, Profec Technologies certifies all transformers as providing voltage isolation of 2.12kVrms, 3kV DC minimum. All shipments are supported by a certificate of conformity to current applicable safety standards. ABSOLUTE MAXIMUM RATINGS INTELLECTUAL PROPERTY RIGHTS (Ratings of components independent of circuit). Short term isolation voltage (1s) DC current Storage temperature Lead temperature, 10s 2.12kVrms, 3.0 kVDC 100μA -40ºC to +85ºC 260ºC ETAL and P5097 are Trade Marks of Profec Technologies Ltd. The Trade Mark ETAL is registered at the UK Trade Marks Registry. Profec Technologies Ltd. is the owner of the design right under the Copyright Designs and Patents Act 1988 and no rights or licences are hereby granted or implied to any third party. P5097 design and construction are protected by patents. British Patent No. 2333646. US Patent Nos. 6,344,787; 6,690,254. European Patent No. 1082734 China Patent No. ZL 99806739.3 Other patents pending. © 1998 - 2005 Profec Technologies Ltd. Reproduction prohibited. ETAL Group Oy, Kuormatie 14, FIN-03101, Nummela Telephone: +358 (0)20 7500 330 Fax: +358 (0)20 7500 333 Website: www.etalgroup.com Email: etalgroup@egruppen.com FM 25326 ISO 9001 E 203175