P5033 ETAL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
ETALDOC 779/5 Page 1 of 6 June 2005 PRODUCT DATA SHEET ULTRA-LOW COST, LOW DISTORTION P5033 LINE MATCHING TRANSFORMER Features Applications ∗ Lead-free (Pb-free) ∗ V.90 and V.92 Modems ∗ RoHS compliant ∗ V.34 Modems ∗ Low Distortion ∗ Fax Machines ∗ 11mm (0.43”) Seated Height ∗ Instrumentation ∗ Industry Standard Pinout ∗ Set Top Box/Web browsing ∗ IEC 60950 and UL 60950 Certified ∗ Internet Feature Phones ∗ UL Recognized Component ∗ Extended Frequency Response ∗ Flat TX and RX Responses ∗ Simple Matching ∗ Low Insertion Loss ∗ High Thermal Stability
DESCRIPTION
P5033 is intended for low cost V.90 and V.92 (56kbps) modems and other high-speed applications. It is a direct substitute for P3356, being mechanically compatible and having identical signal/distortion and matching characteristics, and suitable for supplementary insulation, 250V working. P5033 uses patented design and construction methods to achieve excellent signal performance and safety isolation to international standards. The part is completely lead-free, compliant with RoHS Directive 2002/95/EC, and suitable for lead-free and conventional processing. P5033 has exceptionally flat frequency response from 30Hz to 10kHz, a 3dB bandwidth of 60kHz and requires only the very simplest of matching to achieve good return loss and transhybrid loss across the voiceband, with very low levels of signal distortion at signal frequencies as low as 150Hz. P5033 also exhibits stable characteristics over its full operating temperature range to maximize data throughput under varying environmental conditions without the need for modem retraining. P5033 is certified to IEC 60950 and UL 60950. P5033 is a UL Recognized Component and is supported by an IEC CB certificate. Patented
ETALDOC 779/5 Page 2 of 6 June 2005 SPECIFICATIONS Electrical At T = 25ºC and as circuit Fig. 2 unless otherwise stated. Parameter Conditions Min Typ Max Units Insertion Loss f = 2kHz, RL = 600Ω - 1.5 - dB Frequency Response LF -3dB cutoff HF -3dB cutoff 100Hz – 4kHz ±0.1 Hz kHz dB Return Loss(5) 200Hz – 4kHz 16 - - dB Transhybrid Loss(5) 200Hz – 4kHz - 20 - dB Third Harmonic Distortion (1) 150Hz -3dBm in line 200Hz -10dBm in line -70 -89 dBm dBm Balance DC – 5kHz Method TG 25 80 - - dB Voltage Isolation(2) 50Hz DC 2.12 3.0 kVrms kV Operating Range: Functional Storage -40 +70 +85 ºC ºC Lumped equivalent circuit parameters as Fig. 1 DC resistance (3)(6) Primary resistance RDCp Secondary resistance RDCs 107 100 Ω Ω Leakage inductance, ΔL 2.2 - 5 mH Shunt inductance, Lp(4) 200Hz 10mV 6 9 - H Shunt loss, Rp 200Hz 10mV 12 15 - kΩ Notes: 1. Third harmonic typically exceeds other harmonics by 10dB. 2. Components are 100% tested at 3.25kVDC. 3. Caution: do not pass DC through windings. Telephone line current must be diverted using semiconductor line hold circuit or choke. 4. At signal levels greater than 100mV, Lp will increase and Rp will decrease slightly but the effect is usually favourable to the return loss characteristic. 5. Return loss and transhybrid loss can be improved to 30dB in improved matching circuit. The values shown relate to the simplest configuration, Fig. 2. 6. At signal frequencies, the primary and secondary resistance appear in series with the load and therefore present a sum of resistances in the range 165-207Ω in common with P3356. E quivalent Circuit Fi g . 1 IDEAL 1:1 ½ L ½ L
ETALDOC 779/5 Page 3 of 6 June 2005 MATCHING RECOMMENDATIONS The following recommendations start with the simplest implementations and progress to enhanced performance utilizing additional components. Good performance is achieved even with the simplest configurations. The implementations assume a low impedance balanced TX drive and a relatively high impedance RX input, as is commonly available, though use with other TX/RX arrangements is straightforward. Note that there are no changes to components on the line side, or in the hybrid, whether 600Ω or complex reference impedance selected, thus assisting country configuration. For complex impedance, the matching circuits derived are suitable for reference impedances of the type 270 + 750//150nF performance characteristics. For other impedances, please contact Profec Technologies. Minimum Cost Implementations Insertion Loss: 1.8dB @ 2kHz Frequency Response : ±0.2dB 30Hz – 10kHz Return Loss: 16dB 200Hz – 4kHz Transhybrid Loss: 22dB 200Hz – 4kHz Insertion Loss: 1.0dB @ 2kHz Frequency Response : ±0.5dB 50Hz – 4kHz Return Loss: 18dB 200Hz – 4kHz Transhybrid Loss: 14dB 200Hz – 4kHz Improved matching Insertion Loss: 1.8dB @ 2kHz Frequency Response : ±0.2dB 30Hz – 10kHz Return Loss: 18dB 200Hz – 4kHz Transhybrid Loss: 22dB 50Hz – 10kHz Insertion Loss: 1.0dB @ 2kHz Frequency Response : ±0.5dB 50Hz – 4kHz Return Loss: 20dB 200Hz – 4kHz Transhybrid Loss: 16dB 50Hz – 4kHz Patented 600Ω Fi g . 4 LINE 600 10nF 560 RXA TXA2 TXA1 μ22 F 600Ω Fi g . 2 LINE 600 560 RXA TXA2 TXA1 μ22 F 10nF LINE 270 (220) 750 (820) μ22 F 150nF (120nF ) 750 100nF * *N ote: 100nF capacitor s hould have a temperatur e s table dielectric 120 European CT R21/(Australia, etc .) Fi g . 5 RXA TXA2 TXA1 LINE 270 (220) 750 (820) 150nF (120nF ) 820 100nF * *N ote: 100nF capacitor s hould have a temperatur e s table dielectric 100 European CT R21/(Australia, etc .) Fi g . 3 RXA TXA2 TXA1 μ22 F
ETALDOC 779/5 Page 4 of 6 June 2005 Improved matching and hybrid Insertion Loss (Line to RXA): 2.8dB @ 2kHz Frequency Response : ±0.2dB 30Hz – 10kHz Return Loss: 20dB 200Hz – 4kHz Transhybrid Loss: 30dB 50Hz – 10kHz Insertion Loss (Line to RXA): 2.2dB @ 2kHz Frequency Response : ±0.5dB 50Hz – 4kHz Return Loss: 20dB 200Hz – 4kHz Transhybrid Loss: 18dB 200Hz – 4kHz 600Ω Instrumentation Insertion Loss: 1.5dB @ 2kHz Frequency Response : ±0.2dB 20Hz – 20kHz Return Loss: 16dB 20Hz – 20kHz 600Ω Fi g . 6 LINE 600 10nF 560 1nF10k RXA TXA2 TXA1 μ22 F 10nF 1nFLINE 270 (220) 750 (820) μ22 F 150nF (120nF ) 750 100nF * *N ote: 100nF capacitor s hould have a temperatur e s table dielectric 120 European CT R21/(Australia, etc .) Fi g . 7 RXA TXA2 TXA1 10k μ μ
47 F * μ47 F *
600 Ω Fi g . 8 600Ω 600Ω 6.8nF6.8nF * I f no DC block required, one of thes e capacitor s can be r emoved and the other set to 22 F , or , if preferr ed, both capacitor s can be eliminated. Patented
ETALDOC 779/5 Page 5 of 6 June 2005 SAFETY CERTIFICATION Constructed in accordance with IEC 60950-1, EN 60950-1 and UL 60950-1, supplementary insulation for a primary circuit, 250Vrms maximum working voltage, flammability class V-1. Certified under the IEC CB scheme (Certificate GB597W) to IEC 60950 Third Edition 1999 sub- a maximum working voltage of 250Vrms, nominal mains supply voltage not exceeding 300Vrms and a maximum operating temperature of +85ºC in Pollution Degree 2 environment, supplementary insulation for a primary circuit. Recognized under the Component Recognition Program of Underwriters Laboratories Inc. to US and Canadian requirements CAN/CSA C22.2 No. 60950-1-03/UL60950-1, First Edition, based on IEC 60950-1, First Edition, maximum working voltage 250Vrms, Pollution Degree 2, supplementary insulation. UL File number E203175. Additionally, Profec Technologies certifies all transformers as providing voltage isolation of 2.12kVrms, 3kV DC minimum. All shipments are supported by a certificate of conformity to current applicable safety standards. CONSTRUCTION Dimensions shown are in millimetres (inches). Geometric centres of outline and pin grid coincide within a tolerance circle of 0.6mmØ. Windings may be used interchangeably as primary or secondary. Total weight typically 5.5g. Patented ConnectionsDimensions Fig 9 IDENT Pin Ø 0.70mm (0.028) max F inish: S nAg over Ni barrier . JE SD97 c ategory = e2. NOT ES: Dimens ion “A ” : 3.0 to 3.5mm (0.118 - 0.138)
ETALDOC 779/5 Page 6 of 6 June 2005 ABSOLUTE MAXIMUM RATINGS INTELLECTUAL PROPERTY RIGHTS (Ratings of components independent of circuit). Short term isolation voltage (1s) DC current Storage temperature Lead temperature, 10s 2.12kVrms, 3.0 kVDC 100μA -40ºC to +85ºC 260ºC ETAL, P5033 and P3356 are Trade Marks of Profec Technologies Ltd. The Trade Mark ETAL is registered at the UK Trade Marks Registry. Profec Technologies Ltd. is the owner of the design right under the Copyright Designs and Patents Act 1988 and no rights or licences are hereby granted or implied to any third party. P5033 design and construction are protected by patents. British Patent No. 2333646. US Patent Nos. 6,344,787; 6,690,254. European Patent No. 1082734 China Patent No. ZL 99806739.3 Other patents pending. © 1998 - 2005 Profec Technologies Ltd. Reproduction prohibited. ETAL Group Oy, Kuormatie 14, FIN-03101, Nummela Telephone: +358 (0)20 7500 330 Fax: +358 (0)20 7500 333 Website: www.etalgroup.com Email: etalgroup@egruppen.com FM 25326 ISO 9001 E 203175