P4SMA100A

P4SMA6 TAITRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

z Breakdown voltage from 6.8 to 250 volts z Low inductance, exce llent clamping capability z Repetition rate(duty cycle): 0.01% z Fast response time: typically less than 1.0ps from 0v to V BR z For unidirectional types z Typical IR less than 1 µA above 10V z High temperature soldering guaranteed:250°C/10 seconds at terminals z This series is UL recognized under component index. File number E315008 z RoHS Compliant Mechanical Data Case: JEDEC DO-214AC (SMA) molded plastic over glass passivated junction Epoxy: Meets UL 94V-0 flammability rating Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) Mounting position: Any Weight: 0.002 ounces, 0.061 gram Maximum Ratings (T Ambient=25ºC unless noted otherwise) Symbol Description Value Unit Conditions PPPM Peak Pulse Power Dissipation on 10/1000μs Waveform Minimum 400 W Non-repetitive current pulse, per FIG.3 and derated above TA=25° C per FIG.2 IPPM Peak Pulse current on 10/1000μs Waveform See Table A IFSM Peak Forward Surge Current 40 A 8.3ms single half sine-wave superimposed on rated load, (JEDEC Method) (Note 1,2) TJ,TSTG Operating Junction and Storage Temperature Range -55 to 150 ° C Note: 1. Mounted on 5.0mm x 5.0mm (0.03mm thick) copper pads to each terminal 2. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle= 4 pulses per minutes maximum. SMA

400W Surface Mount Transient Voltage Suppressor Rev. D/AH 2008-02-25 www.taitroncomponents.com Page 2 of 6 P4SMA6.8A - P4SMA250CA Electrical Characteristics (T Ambient=25ºC unless noted otherwise) Breakdown Voltage @ Test Current. Part NO. Device Marking Code Reverse Stand- off Voltage V BR Max. Clamping Voltage @ IPPM Max. Peak Pulse Current Max. Reverse Leakage Current @ V WM Uni-Polar Bi-Polar Uni Bi V WM (V) Min. Max. IT(mA) VC (V) IPPM (A) ID (μA) 12.1 33.9 200/400 P4SMA62A P4SMA62CA 62A 62C 53 58.9 65.1 1 85 4.8 1.0 P4SMA100A P4SMA100CA 100A 100C 85.5 95 105 1 137 3.0 1.0 P4SMA110A P4SMA110CA 110A 110C 94 105 116 1 152 2.7 1.0 P4SMA120A P4SMA120CA 120A 120C 102 114 126 1 165 2.5 1.0 P4SMA130A P4SMA130CA 130A 130C 111 124 137 1 179 2.3 1.0

400W Surface Mount Transient Voltage Suppressor Rev. D/AH 2008-02-25 www.taitroncomponents.com Page 3 of 6 P4SMA6.8A - P4SMA250CA Fig.1- Peak Pulse Power Rating Curve Td - Pulse Width (sec.) Fig.2- Pulse Derating Curve Ta - Ambient Temperature (°C) Electrical Characteristics (T Ambient=25ºC unless noted otherwise) Breakdown Voltage @ Test Current. Part NO. Device Marking Code Reverse Stand- off Voltage V BR Max. Clamping Voltage @ IPPM Max. Peak Pulse Current Max. Reverse Leakage Current @ V WM Uni-Polar Bi-Polar Uni Bi V WM (V) Min. Max. IT(mA) VC (V) IPPM (A) ID (μA) P4SMA150A P4SMA150CA 150A 150C 128 143 158 1 207 2.0 1.0 P4SMA160A P4SMA160CA 160A 160C 136 152 168 1 219 1.9 1.0 P4SMA170A P4SMA170CA 170A 170C 145 162 179 1 234 1.8 1.0 P4SMA180A P4SMA180CA 180A 180C 154 171 189 1 246 1.7 1.0 P4SMA200A P4SMA200CA 200A 200C 171 190 210 1 274 1.5 1.0 P4SMA220A P4SMA220CA 220A 220C 185 209 231 1 328 1.3 1.0 P4SMA250A P4SMA250CA 250A 250C 214 237 263 1 344 1.2 1.0 Note: For bi-directional type having VWM of 10V and less, the ID limit is double. Typical Characteristics Curves PPPM - Peak Pulse Power Dissipation (KW) PPPM or IPPM, Derating in Percentage (%)

400W Surface Mount Transient Voltage Suppressor Rev. D/AH 2008-02-25 www.taitroncomponents.com Page 4 of 6 P4SMA6.8A - P4SMA250CA Fig.4 - Max. Non-Repetitive Forward Surge Current Uni-directional only Number of Cycles at 60Hz Fig.5- Steady State Power Derating Curve TL - Lead Temperature (°C) Fig.3- Pulse Waveform T - Time (ms) PM(AV) Steady State Power Dissipation (W) IFSM - Peak Forward Surge Current (A) IPPM - Peak Pulse Current (%) Fig.6- Typ. Junction Capacitance Uni-Directional VWM – Reverse Stand-Off Voltage (V) CJ - Junction Capacitance (pF)

400W Surface Mount Transient Voltage Suppressor Rev. D/AH 2008-02-25 www.taitroncomponents.com Page 5 of 6 P4SMA6.8A - P4SMA250CA Fig.7 – Typical Reverse Leakage Characteristics V(BR) – Breakdown Voltage (V) Dimensions in inches (mm) SMA ID – Instantaneous Reverses Leakage Current (µA)

400W Surface Mount Transient Voltage Suppressor Rev. D/AH 2008-02-25 www.taitroncomponents.com Page 6 of 6 P4SMA6.8A - P4SMA250CA How to contact us: US HEADQUARTERS

28040 WEST HARRISON PARKAWAY, VALENCIA, CA 91355-4162

Tel: (800) TAITRON (800) 824-8766 (661) 257-6060 Fax: (800) TAITFAX (800) 824-8329 (661) 257-6415 Email: taitron@taitroncomponents.com Http://www.taitroncomponents.com TAITRON COMPONENTS MEXICO, S.A .DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P.

42970 MEXICO

Tel: +52-55-5560-1519 Fax: +52-55-5560-2190 TAITRON COMPONETS INCORPORATED E REPRESENTAÇÕES DO BRASIL LTDA RUA DOMINGOS DE MORAIS, 2777, 2.ANDAR, SALA 24 SAÚDE - SÃO PAULO-SP 04035-001 BRAZIL Tel: +55-11-5574-7949 Fax: +55-11-5572-0052 TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE METROBANK PLAZA, 1160 WEST YAN’ AN ROAD, SUITE 1503, SHANGHAI, 200052, CHINA Tel: +86-21-5424-9942 Fax: +86-21-5424-9931