P4SMA UNSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 7
Technical content
Features
Description
Uni-directional Bi-directional
Applications
Surface Mount Transient Voltage Suppressors (TVS)
6.8 To 600V 400W
www.unsemi.com.tw Cathode Bi-directional Anode Uni-direction Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25°C per Fig. 2. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. 4. VF < 3.5V for VBR < 200V and VF< 6.5V for VBR > 201V. 400 See Next Table 1.0 3.5/5.0 -55 to +150 -40 to +125 PPPM IPP PM(AV) IFSM VF TJ ,TSTG TOP Peak Pulse Power Dissipation with a 10/1000µs waveform (Fig.1)(Note1), (Note 2) Peak Pulse Current with a 10/1000µs waveform.(Note1,Fig.3) Power dissipation on infinite heatsink at TL = 75℃ Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) Maximum Instantaneous Forward Voltage at 25A for Unidirectional Only (Note 4) Junction and storage temperature range Operating temperature range W A W A V Parameter Symbol Value Unit Maximum Ratings (TA =25℃ unless otherwise noted) Functional Diagram
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.2/6 Surface Mount Transient Voltage Suppressors (TVS) ROHS6.8 To 600V 400W P4SMA Series Part Number Uni Bi Reverse Stand-Off Voltage VRWM(V) Breakdown Voltage VBR(V) @IT Maximum Clamping Voltage VC @IPP(V) Maximum Peak Pulse Current IPP(A) Maximum Reverse Leakage IR @VRWM (μA) Test Current IT(mA) MIN MAX Marking Uni Bi 5.8 6.4 7.0 7.8 8.6 9.4 10.2 11.1 12.8 13.6 15.3 17.1 18.8 20.5 23.1 25.6 28.2 30.8 33.3 36.8 40.2 43.6 47.8 53.0 58.1 64.1 70.1 77.8 85.5 94.0 102.0 111.0 128.0 136.0 145.0 154.0 171.0 185.0 214.0 256.0 299.3 324.9 342.0 376.2 427.5 444.6 470.3 513.0 1000 500 200 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103.0 113.0 125.0 137.0 152.0 165.0 179.0 207.0 219.0 234.0 246.0 274.0 328.0 344.0 414.0 482.0 524.4 552.0 607.2 690.0 717.6 759.0 828.0 6V8A 7V5A 8V2A 9V1A 10A 11A 12A 13A 16A 15A 18A 20A 22A 24A 27A 30A 33A 36A 39A 43A 47A 51A 56A 62A 68A 75A 82A 91A 100A 110A 120A 130A 150A 160A 170A 180A 200A 220A 250A 300A 350A 380A 400A 440A 500A 520A 550A 600A 6V8C 7V5C 8V2C 9V1C 10C 11C 12C 13C 15C 16C 18C 20C 22C 24C 27C 30C 33C 36C 39C 43C 47C 51C 56C 62C 68C 75C 82C 91C 100C 110C 120C 130C 150C 160C 170C 180C 200C 220C 250C 300C 350C 380C 400C 440C 500C 520C 550C 600C 6.46 7.13 7.79 8.65 9.50 10.45 11.40 12.35 14.25 15.20 17.10 19.00 20.90 22.80 25.65 28.50 31.35 34.20 37.05 40.85 44.65 48.45 53.20 58.90 64.60 71.25 77.90 86.45 95.00 104.50 114.00 123.50 142.50 152.00 161.50 171.00 190.00 209.00 237.50 285.00 332.50 361.00 380.00 418.00 475.00 494.00 522.50 570.00 7.14 7.88 8.61 9.56 10.50 11.55 12.60 13.65 15.75 16.80 18.90 21.00 23.10 25.20 28.35 31.50 34.65 37.80 40.95 45.15 49.35 53.55 58.80 65.10 71.40 78.75 86.10 95.55 105.00 115.50 126.00 136.50 157.50 168.00 178.50 189.00 210.00 231.00 262.50 315.00 367.50 399.00 420.00 462.00 525.00 546.00 577.50 630.00 Electrical Characteristics(TA=25℃ unless otherwise noted) (Continue) Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double P4SMA6.8A P4SMA7.5A P4SMA8.2A P4SMA9.1A P4SMA10A P4SMA11A P4SMA12A P4SMA13A P4SMA15A P4SMA16A P4SMA18A P4SMA20A P4SMA22A P4SMA24A P4SMA27A P4SMA30A P4SMA33A P4SMA36A P4SMA39A P4SMA43A P4SMA47A P4SMA51A P4SMA56A P4SMA62A P4SMA68A P4SMA75A P4SMA82A P4SMA91A P4SMA100A P4SMA110A P4SMA120A P4SMA130A P4SMA150A P4SMA160A P4SMA170A P4SMA180A P4SMA200A P4SMA220A P4SMA250A P4SMA300A P4SMA350A P4SMA380A P4SMA400A P4SMA440A P4SMA500A P4SMA520A P4SMA550A P4SMA600A P4SMA6.8CA P4SMA7.5CA P4SMA8.2CA P4SMA9.1CA P4SMA10CA P4SMA11CA P4SMA12CA P4SMA13CA P4SMA15CA P4SMA16CA P4SMA18CA P4SMA20CA P4SMA22CA P4SMA24CA P4SMA27CA P4SMA30CA P4SMA33CA P4SMA36CA P4SMA39CA P4SMA43CA P4SMA47CA P4SMA51CA P4SMA56CA P4SMA62CA P4SMA68CA P4SMA75CA P4SMA82CA P4SMA91CA P4SMA100CA P4SMA110CA P4SMA120CA P4SMA130CA P4SMA150CA P4SMA160CA P4SMA170CA P4SMA180CA P4SMA200CA P4SMA220CA P4SMA250CA P4SMA300CA P4SMA350CA P4SMA380CA P4SMA400CA P4SMA440CA P4SMA500CA P4SMA520CA P4SMA550CA P4SMA600CA 38.10 35.40 33.06 29.85 27.59 25.64 23.95 21.98 18.87 17.78 15.87 14.44 13.07 12.05 10.67 9.66 8.75 8.02 7.42 6.75 6.17 5.71 5.19 4.71 4.35 3.88 3.54 3.20 2.92 2.63 2.42 2.23 1.93 1.83 1.71 1.63 1.46 1.22 1.16 0.97 0.83 0.76 0.72 0.66 0.58 0.56 0.53 0.48
Surface Mount Transient Voltage Suppressors (TVS) ROHS6.8 To 600V 400W P4SMA Series Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.4/6 Soldering Parameters Lead–free assembly 150°C 200°C 60 -180 Seconds 3°C/Second max 3°C/Second max 217°C 60 -150 Seconds 260 +0/-5°C 20-40 Seconds 6°C/Second Max 8 minutes Max 280°C Reflow Condition Pre Heat -Temperature Min (Ts(min)) -Temperature Max (Ts(max)) - Time (min to max) (TS) Average ramp up rate ( Liquidus Temp TL) to peak TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Time (min to max) (TS) Peak Temperature (TP) Do not exceed Time 25°C to peak Temperature (TP) Time within 5°C of actual peak Temperature (TP) Ramp-down Rate TimeTime to peak temperature ( T25℃ to peak) Preheat Ts(min) Ts(max) TL TL TP Temperature Ramp-up Ramp-down Critical Zone TL toTP TP Ts I-V Curve Characteristics V VC VBR VR IR VFIT IPP Uni-directional VVC VBR VR VCVBRVR IR IR IT IT IPP IPP Bi-directional Physical Specifications Environmental Specifications Weight Case Polarlty Terminal Color band denotes cathode except Bipolar JESD22-A104 JESD22-A102 JESD22-A103 JESD22-A108 JESD22-A106 Temperature Cycle Pressure Cooker High Temp. Storage HTRB Thermal Shock 0.002 ounce, 0.061 gram JEDEC DO-214AC Molded Plastic over glass passivated junction Matte Tin-plated leads, Solderable per JESD22-B102D
Surface Mount Transient Voltage Suppressors (TVS) ROHS6.8 To 600V 400W P4SMA Series Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Part Numbering P4 SMA C Axxx 5% VBR VOLTAGE TOLERANCE BI-DIRECTIONAL VBR VOLTAGE SERIES Dimensions DO-214AC (SMA) Cathode Band Dimensions Min Max MaxMin Inches Millimeters A B C D E F G H I J K L 0.049 0.162 0.099 0.077 0.030 0.192 0.006 0.070 0.082 0.082 0.064 0.179 0.109 0.089 0.060 0.008 0.206 0.012 0.090 1.230 4.10 2.510 1.960 0.750 4.87 0.152 1.800 2.100 2.100 1.630 4.550 2.760 2.260 1.510 0.203 5.220 0.305 2.300
Surface Mount Transient Voltage Suppressors (TVS) ROHS6.8 To 600V 400W P4SMA Series Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Packaging Dimensions Unit: Inches (Millimeters) 0.061 (1.55) 0.512(13.0) Arbor Hole Diamete Dimensions are in inches (and millimeters) Direction of Feed 0.472 (12.0) Diameter Cover tape 0.157 (4.0) 0.157 (4.0) 0.38 (9.53 13.0 (330.0) 0.57 (14.6)
Ordering Information
Part Number Component Package Quantity Packaging Option P4SMAXXXXX DO-21 4AC 5,000 Tape & Reel -12mm/13″tape Packaging Specification EIA STD RS-481
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Disclaimer ROHS UNSEMI RESERVES THE RIGHT TO MAKE CHANGE ON OUR PRODUTS , PRODUCTS SPECIFICATION AND DATA WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. UN SEMICONDUCTOR LIMITED its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “UNSEMI”)does not give any representations or warranties for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. In no event shall UNSEMI be liable for any indirect, incidental, punitive, special or consequential damages (including any and all implied warranties, warranties of fitness for particular purpose, non-infringement and merchantability.) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Statements regarding the suitability of products for certain types of applications are based on UNSEMI knowledge of typical requirements that are often placed on UNSEMI products in generic applications. Such statements are not binding, statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify UNSEMI's terms and conditions of purchase, including but not limited to the warranty expressed therein. Unless otherwise agreed in writing, UNSEMI product is not designed, authorized or warranted to be suitable for use in medical life-saving, or life-sustaining application , nor in applications where failure or malfunction of a UNSEMI product can reasonably be expected to result in personal injury, death or severe property or environmental damage. UNSEMI and its suppliers accept no liability for inclusion or use of UNSEMI products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. All referenced brands, product names, service names and trademarks are the property of their respective owners.