P4SMA_13 TSC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

— For surface mounted application in order to optimize board space — Fast response time: Typically less than 1.0ps from 0 volt to BV min — High temperature soldering guaranteed: 260℃ / 10 seconds at terminals — Plastic material used carried Underwriters Laboratory Flammability Classification 94V-0 — 400 watts peak pulse power capability with a 10 / 1000 us waveform — Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data — Case: Molded plastic — Terminals: Pure tin plated, lead free — Polarity: Indicated by cathode band — Packaging: 12mm tape per EIA Std RS-481 — Weight: 0.064 gram Type Number Value R3G Peak Power Dissipation at TA=25℃, Tp=1ms(Note 1) 400 Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method)(Note 2) I FSM 40 Amps Maximum Instantaneous Forward Voltage at 25 A for Unidirectional Only VF 3.5 Volts Operating and Storage Temperature Range -55 to +150 Note 1: Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25℃ Per Fig. 2 Note 2: Mounted on 5 x 5mm Copper Pads to Each Terminal Devices for Bipolar Applications 1. For Bidrectional Use C or CA Suffix for Types P4SMA6.8 through Types P4SMA200A 2. Electrical Characterstics Apply in Both Directions Version:I13 Ordering Information (example) Part No. Package Packing Packing code Packing code (Green)

Version:I13 RATINGS AND CHARACTERISTIC CURVES (P4SMA SERIES) 100 125 0 25 50 75 100 125 150 175 200 PEAK PULSE POWER(PPP) OR CURRENT (IPP) A DERATING IN PERCENTAGE (%) TA, AMBIENT TEMPERATURE (oC) FIG.2 PULSE DERATING CURVE 1 10 100 IFSM, PEAK FORWARD SURGE CURRENT (A) NUMBER OF CYCLES AT 60 Hz FIG. 4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY 8.3mS Single Half Sine Wave JEDEC Method 100 120 140 00 . 511 . 522 . 533 . 54 PEAK PULSE CURRENT (%) t, TIME ms FIG. 3 CLAMPING POWER PULSE WAVEFORM td Peak Value IPPM tr=10usec Half Value-IPPM/2 10/1000usec, WAVEFORM as DEFINED by R.E.A. PULSE WIDTH(td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% OF IPPM 100 1000 10000 100000 1 10 100 CJ, JUNCTION CAPACITANCE (pF) A V(BR), BREAKDOWN VOLTAGE (V) FIG. 5 TYPICAL JUNCTION CAPACITANCE TA=25℃ f=1.0MHz Vsig=50mVp-p VR=0 MEASURED at STAND-OFF VOLTAGE,Vwm 0.1 100 0.1 1 10 100 1000 10000 PPPM, PEAK PULSE POWER, KW tp, PULSE WIDTH, (uS) FIG. 1 PEAK PULSE POWER RATING CURVE NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG.3 TA = 25℃

Test Stand-Off Maximum Maximum Maximum Maximum Current Voltage Reverse Leakage Peak Pulse Clamping Voltag e Temperature IT VWM @ VWM Current IPPM @ IPPM Coefficient Min Max (mA) (V) ID (uA) (A) (Note 2) Vc(V) of VBR(%/℃) Version:I13 ELECTRICAL CHARACTERISTICS (TA=25℃ unless otherwise noted) Device Marking Code Breakdown Voltage VBR (V) (Note 1)Device

Test Stand-Off Maximum Maximum Maximum Maximum Current Voltage Reverse Leakage Peak Pulse Clamping Voltag e Temperature IT VWM @ VWM Current IPPM @ IPPM Coefficient Min Max (mA) (V) ID (uA) (A) (Note 2) Vc(V) of VBR(%/℃) P4SMA100 CWJ 90 110 1.0 81.0 1 2.9 144 0.106 P4SMA100A CXJ 95 105 1.0 85.5 1 3.0 137 0.106 P4SMA110 CYJ 99 121 1.0 89.2 1 2.6 158 0.107 P4SMA110A CZJ 105 116 1.0 94.0 1 2.7 152 0.107 P4SMA120 RDJ 108 132 1.0 97.2 1 2.4 173 0.107 P4SMA120A REJ 114 126 1.0 102.0 1 2.5 165 0.107 P4SMA130 RFJ 117 143 1.0 105.0 1 2.2 187 0.107 P4SMA130A RGJ 124 137 1.0 111.0 1 2.3 179 0.107 P4SMA150 RHJ 135 165 1.0 121.0 1 1.9 215 0.108 P4SMA150A RKJ 143 158 1.0 128.0 1 2.0 207 0.108 P4SMA160 RLJ 144 176 1.0 130.0 1 1.8 230 0.108 P4SMA160A RMJ 152 168 1.0 136.0 1 1.9 219 0.108 P4SMA170 RNJ 153 187 1.0 138.0 1 1.7 244 0.108 P4SMA170A RPJ 162 179 1.0 145.0 1 1.8 234 0.108 P4SMA180 RQJ 162 198 1.0 146.0 1 1.6 258 0.108 P4SMA180A RRJ 171 189 1.0 154.0 1 1.7 246 0.108 P4SMA200 RSJ 180 220 1.0 162.0 1 1.4 287 0.108 P4SMA200A RTJ 190 210 1.0 171.0 1 1.51 274 0.108 Notes: 1. VBR measure after IT applied for 300us, IT=square wave pulse or equivalent. 2. Surge current waveform per Figure. 3 and derate per Figure. 2. 3. For bipolar types having VWM of 10 volts and under, the ID limit is doubled. 4. For bidirectional use C or CA suffix for types PS4MA6.8 through P4SMA200A. 5. All terms and symbols are consistent with ANSI/IEEE C62.35. Version:I13 ELECTRICAL CHARACTERISTICS (TA=25℃ unless otherwise noted) Device Device Marking Code Breakdown Voltage VBR (V) (Note 1)

Tape & Reel specification AB C D N G T 7" 12mm 178 1.9 13 21 62 12.2 14.6 AB C D N G T max ±0.5 ±0.5 min ±0.5 +2.0;-0 max 13" 12mm 330 2 13 20.2 75 12.4 18.4 Unit (mm)

Ordering information

Part No. Package Packing Packing code Packing code (Green) R3G 7.5K / 13" REEL R2G 1.8K / 7" REEL F3G 7.5K / 13" REEL F2G Reel Size Tape Size E3G Note: "x" is Device Code from "6.8" thru "200". Reel Size Tape Size P4SMAxx (Note) 1.8K / 7" REEL 7.5K / 13" REEL E2G 7.5K / 13" Plastic REEL M2G 7.5K / 13" Plastic REEL F4G 1.8K / 7" REEL

A B C D E Min Max Min Max A 1.27 1.58 0.050 0.062 B 2.29 2.83 0.090 0.111 C 4.06 4.60 0.160 0.181 D 1.99 2.50 0.078 0.098 E 0.90 1.41 0.035 0.056 F 0.15 0.31 0.006 0.012 G 0.10 0.20 0.004 0.008 H 4.95 5.33 0.195 0.210 P/N = Specific Device Code G = Green Compound YW = Date Code Marking Diagram 3.92 2.41 4.43 Suggested PAD Layout Unit(mm) 1.78 1.51 Package Outline Dimensions DIM. Unit(mm) Unit(inch)