P4KE_13 TSC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

— Plastic package has Underwriters Laboratory Flammability Classification 94V-0 — Case: Molded plastic — Lead: Pure tin plated lead free, solderable per MIL-STD-202, Method 208 — Polarity: Color band denotes cathode except bipolar — Weight: 0.3 gram Type Number Value Volts Peak Power Dissipation at TA=25℃, Tp=1ms(Note 1) Minimum 400 Steady State Power Dissipation at TL=75℃ Lead Lengths .375", 9.5mm (Note 2) PD 1 Watts Note 2: Mounted on 5 x 5 mm Copper Pads to Each Terminal Note 3: 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minute Maximum Note 4: VF=3.5V for Devices of VBR≦200V and VF=6.5V Max. for Device VBR>200V Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method)(Note 3) I FSM 40 Amps Maximum Instantaneous Forward Voltage at 25 A for Unidirectional Only (Note 4) VF 3.5 / 6.5 Devices for Bipolar Applications 1. For Bidrectional Use C or CA Suffix for Types P4KE6.8 through Types P4KE440 2. Electrical Characterstics Apply in Both Directions Version:H12 Packing code (Green) 52mm A0G Operating and Storage Temperature Range -55 to +175 Note 1: Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25℃ Per Fig. 2 Ordering Information (example) Part No. Package Packing INNER TAPE Packing code

Version:H12 RATINGS AND CHARACTERISTIC CURVES (P4KE SERIES) 0.25 0.5 0.75 1.25 0 25 50 75 100 125 150 175 200 PM(AV), STEADY STATE POWER DISSIPATION,WATTS TL, LEAD TEMPERATURE (oC) FIG.2 STEADY STATE POWER DERATING CURVE With heat sink Without heat sink 1 10 100 IFSM, PEAK FORWARD SURGE CURRENT (A) NUMBER OF CYCLES AT 60 Hz FIG. 4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY 8.3mS Single Half Sine Wave JEDEC Method UNIDIRECTIONAL ONLY 100 120 140 00 . 511 . 522 . 533 . 54 PEAK PULSE CURRENT (%) t, TIME ms FIG. 3 CLAMPING POWER PULSE WAVEFORM td Peak Value IPPM tr=10use Half Value-IPPM/2 10/1000sec, WAVEFORM as DEFINED by R.E.A. PULSE WIDTH(td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% OF IPPM 100 1000 10000 100000 1 10 100 CJ, JUNCTION CAPACITANCE (pF) A V(BR), BREAKDOWN VOLTAGE (V) FIG. 5 TYPICAL JUNCTION CAPACITANCE TA=25℃ f=1.0MHz Vsig=50mVp-p VR=0 MEASURED at STAND-OFF VOLTAGE,Vwm 0.1 100 0.1 1 10 100 1000 10000 PPPM, PEAK PULSE POWER, KW tp, PULSE WIDTH, (uS) FIG. 1 PEAK PULSE POWER RATING CURVE NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG.3 TA= 25℃

Test Stand-Off Maximum Maximum Maximum Maximum Current Voltage Reverse Leakage Peak Pulse Clamping Voltag e Temperature @ VWM Current @ IPPM Coefficient IT VWM ID IPPM Vc of VBR (V) (mA) (V) (uA) (A) (V) (%/℃) Min Max (Note 2) Version:H12 ELECTRICAL CHARACTERISTICS (TA=25℃ unless otherwise noted) General Part Number Nominal Voltage Breakdown Voltage (Note 1) VBR (V)

Test Stand-Off Maximum Maximum Maximum Maximum Current Voltage Reverse Leakage Peak Pulse Clamping Voltag e Temperature @ VWM Current @ IPPM Coefficient IT VWM ID IPPM Vc of VBR (V) (mA) (V) (uA) (A) (V) (%/℃) Min Max (Note 2) P4KE91 91 81.9 100 1 73.7 1 3.2 131 0.106 P4KE100 100 90 110 1 81.0 1 2.9 144 0.106 P4KE100A 100 95 105 1 85.5 1 3.0 137 0.106 P4KE110 110 99 121 1 89.2 1 2.6 158 0.107 P4KE110A 110 105 116 1 94.0 1 2.7 152 0.107 P4KE120 120 108 132 1 97.2 1 2.4 173 0.107 P4KE120A 120 114 126 1 102 1 2.5 165 0.107 P4KE130 130 117 143 1 105 1 2.2 187 0.107 P4KE130A 130 124 137 1 111 1 2.3 179 0.107 P4KE150 150 135 165 1 121 1 1.9 215 0.108 P4KE150A 150 143 158 1 128 1 2.0 207 0.108 P4KE160 160 144 176 1 130 1 1.8 230 0.108 P4KE160A 160 152 168 1 136 1 1.9 219 0.108 P4KE170 170 153 187 1 138 1 1.7 244 0.108 P4KE170A 170 162 179 1 145 1 1.8 234 0.108 P4KE180 180 162 198 1 146 1 1.6 258 0.108 P4KE180A 180 171 189 1 154 1 1.7 246 0.108 P4KE200 200 180 220 1 162 1 1.4 287 0.108 P4KE200A 200 190 210 1 171 1 1.51 274 0.108 P4KE220 220 198 242 1 175 1 1.20 344 0.108 P4KE220A 220 209 231 1 185 1 1.30 328 0.108 P4KE250 250 225 275 1 202 1 1.10 360 0.110 P4KE250A 250 237 263 1 214 1 1.20 344 0.110 P4KE300 300 270 330 1 243 1 0.97 430 0.110 P4KE300A 300 285 315 1 256 1 1.00 414 0.110 P4KE350 350 315 385 1 284 1 0.83 504 0.110 P4KE350A 350 332 368 1 300 1 0.87 482 0.110 P4KE400 400 360 440 1 324 1 0.73 574 0.110 P4KE400A 400 380 420 1 342 1 0.76 548 0.110 P4KE440 440 396 484 1 356 1 0.66 631 0.110 P4KE440A 440 418 462.0 1 376 1 0.69 600 0.110 Notes: 1. VBR measure after IT applied for 300us, IT=square wave pulse or equivalent. 2. Surge current waveform per Figure. 3 and derate per Figure. 2. 3. For bipolar types having VWM of 10 volts and under, the ID limit is doubled. 4. All terms and symbols are consistent with ANSI/IEEE C62.35. Version:H12 ELECTRICAL CHARACTERISTICS (TA=25℃ unless otherwise noted) General Part Number Nominal Voltage Breakdown Voltage (Note 1) VBR (V)

Ordering information

AB Z T E ∣L1-L2∣ DD 1D 0 W DO-41 5 26 1.2 6 0.8 1 330 85.7 16.6 76 Unit (mm) Symbol A B C D 3K / AMMO box A1G Part No. Package Packing INNER TAPE Packing code Packing code (Green) P4KExx 3K / AMMO box A0G 5K / 13" Reel R0G 5K / 13" Reel R1G 1K / Bulk packing B0G 5.1 0.8 3.0 1.2 Note: "xx" is Device Code from "6.8" thru "440". AXIAL LEAD TAPING SPECIFICATIONS Outline Suggested Mounting Hole Rule Unit(mm)

A 2.00 2.70 0.079 0.106 B 0.71 0.86 0.028 0.034 C 25.40 - 1.000 - D 4.20 5.20 0.165 0.205 E 25.40 - 1.000 - P/N = Specific Device Code G = Green Compound YWW = Date Code DIM. Unit(mm) Unit(inch) Marking Diagram