P4KE600A LUGUANG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Dimensions in inches and (millimeters) DO-41 F e a t u r e s /cuspopen 400W surge capability at 10 x 100us waveform, duty cycle: 0.01% /cuspopen Excellent clamping capability /cuspopen Low zener impedance /cuspopen Fast response time: Typically less than 1.0ps from 0 volts to VBR for unidirectional and 5.0 ns for bidirectional /cuspopen Typical I R less than 1 uA above 10V /cuspopen High temperature soldering guaranteed: 260oC / 10 seconds / .375”,(9.5mm) lead length / 5lbs.,(2.3kg) tension M e c h a n i c a l D a t a /cuspopen Case: Molded plastic /cuspopen Polarity: Color band denotes cathode except bipolar Maximum Ratings and Electrical Characteristics Rating at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol Value Units Peak Power Dissipation at TA=25 o C, Tp=1ms (Note 1) PPK Minimum 400 Watts Steady State Power Dissipation at TL=75 o C Lead Lengths .375”, 9.5mm (Note 2) PD 1.0 Watts Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 3) IFSM 40 Amps Maximum Instantaneous Forward Voltage at 25.0A for Unidirectional Only (Note 4) VF 3.5 /5.0 Volts Operating and Storage Temperature Range TJ, TSTG -55 to + 150 o C Notes: 1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25 o C Per Fig. 2. 3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minutes Maximum. 4. VF=3.5V for Devices of VBR ≤ 200V and VF=6.5V Max. for Devices VBR>200V Devices for Bipolar Applications 1. For Bidirectional Use C or CA Suffix for Types P4KE6.8 thru Types P4KE440. 2. Electrical Characteristics Apply in Both Directions. P4KE SERIES

400 Watts Transient Voltage Suppressor Diodes

http://www.luguang.cn mail:lge@luguang.cn

Min (V) Max (V) IT (mA) P4KE22 P4KE22C 19 80 24 20 1 1 17 8 12 54 31 9 Electrical Characteristics(TA=25к unless otherwise noted) Part Number (Uni) Part Number (Bi) Breakdown Voltage VBR @IT Maximum Reverse Leakage IR @VRWM (uA) Working Peak Reverse Voltage VRWM (V) Maximum Reverse Surge Current IPP (A) Maximum Clamping Voltage VC @IPP (V) Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double P4KE SERIES http://www.luguang.cn mail:lge@luguang.cn

Min (V) Max (V) IT (mA) 4 180 4 180C 162 00 198 00 1 1 146 0 1 2 80 Electrical Characteristics(TA=25к unless otherwise noted) Part Number (Uni) Part Number (Bi) Breakdown Voltage VBR @IT Maximum Reverse Leakage IR @VRWM (uA) Working Peak Reverse Voltage VRWM (V) Maximum Reverse Surge Current IPP (A) Maximum Clamping Voltage VC @IPP (V) P4KE SERIES http://www.luguang.cn mail:lge@luguang.cn

AMBIENAVERAGE FORWARD CURRENT, (A) 0 100 1 40 25 100 100 12 150 0 0 1 0.1 6 70 1 10000 0.2 ## 0 Ratings and Characteristics Curves (TA=25к unless otherwise noted) Fig. 1 - Pulse Derating Curve Fig. 2 - Maximum Non-Repetitive Surge Current 0.0 0.2 0.4 0.6 0.8 1.0 0 25 50 75 100 125 150 175 200 Steady State Power Dissipation, (W) 1 10 100 Peak Forward Surge Current, (A) Number of Cycles at 60 Hz TJ = TJ max. 8.3 ms Single Half Sine-Wave 100 0 25 50 75 100 125 150 175 200 Peak Pulse Derating in Percentage of Peak Power or Current, (%) Ambient Temperature ,TA (к) 0.1 100 01 1 10 100 1000 10000 Peak Power (kW) ˈ ˇˈ˃ 0 0 ˆ˃˃˃ ˈ˃ 0.2 100 ˈ ˇˈ˃ 1 50 ˈ ˇˈ˃ 1.5 33 ˄ˉˈ˃ ˇ 2 23 ˈ ˇˈ˃ 3 13 ˄ˇ˃˃ ˈ 4 10 Fig. 5 - Pulse Waveform Fig. 6 - Typical Junction Capacitance Fig. 3 - Steady State Power Derating Curve Fig. 4 - Peak Pulse Power Rating Curve 100 1000 10000 1 10 100 1000 Junction Capacitance,CJ (pF) Reverse Breakdown Voltage,VBR (V) Bi-directional @VRWM Uni-directional @VRWM TJ=25 °C f=1.0MHz 0.0 0 25 50 75 100 125 150 175 200 Lead Temperature , TL (к) 100 0 1 2 3 4 Peak Pulse Current , (% ) Time , (ms) TJ = 25 ̓C Pulse Width (td) is defined as the point where the peak current decays to 50 % of Ipp 10/1000 ȝsec. Waveform as defined by R.E.A. Peak Value (Ipp) Half Value = Ipp td Tr=10ȝs Bi-directional @zero bias Uni-directional @zero bias 0.1 0.1 1 10 100 1000 10000 Pulse Width ,td (ȝs) P4KE SERIES http://www.luguang.cn mail:lge@luguang.cn