P4KE10

P4KE6.8_V01 CHENDA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Features

400w peak pulse power capability Excellent clamping capability Low incremental surge resistance Fast response time:typically less than 1.0ps from 0v to VBR for unidirectional and 5.0ns ror bidirectional types. High temperature soldering guaranteed: 265°C/10S/9.5mm lead length at 5 lbs tension Breakdown Voltage:6.8-440 Volts Peak Pulse Power:400 Watts Mechanical Data DO-41 Dimensions in inches and (millimeters) Case: JEDEC DO-41 molded plastic body over passivated junction Terminals: Plated axial leads, solderable per MIL-STD 750,method 2026 Polarity: Color band denotes cathode except for bidirectional types Mounting Position: Any Weight: 0.012 ounce,0.33 grams MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. C Peak power dissipation sipation Peak pulse reverse currentPeak pulse reverse curr Steady state power dissapation (Note 2) ward surPeak forward surge currentPeak for Maximum instantaneous forward voltage at 25A for unidirectional only (Note 4) Operating junction and storage temperature range PPPM IPPM PM(AV) IFSM TSTG,TJ 3.5/6.5 SYMBOLS UNITSVALUE Minimum 400 See Table 1 1.0 -55 to + 175 VF Watts Amps Watts Amps Volts DEVICES FOR BIDIRECTIONAL APPLICATIONS For bidirectional use suffix C or CA for types P4KE6.8 thru P4KE440 (e.g. P4KE6.8CA,P4KE440CA) Electrical characteristics apply in both directions. 1.10/1000µs waveform non-repetitive current pulse,per Fig.3 and derated above Ta=25 C per Fig.2 2.TL=75 C,lead lengths 9.5mm,Mounted on copper pad atea of (40x40mm)Fig.5 3.Measured on 8.3ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum. Notes: 0.107 (2.7) 0.080 (2.0) DIA. 0.034 (0.86) 0.028 (0.70) DIA. 0.205 (5.2) 0.166(4.1) 1.0(25.4) MIN. 1.0 (25.4) MIN.

Rev:2019A0 Page :2https://www.microdiode.com P4KE6.8 THRU P4KE440CA Breakdown Voltage:6.8-440 Volts Peak Pulse Power:400 Watts ELECTRICAL CHARACTERISTICS (at TA=25°C unless otherwise noted) P4KE6.8 P4KE6.8A P4KE7.5 P4KE7.5A P4KE8.2 P4KE8.2A P4KE9.1 P4KE9.1A P4KE10 P4KE10A P4KE11 P4KE11A P4KE12 P4KE12A P4KE13 P4KE13A P4KE15 P4KE15A P4KE16 P4KE16A P4KE18 P4KE18A P4KE20 P4KE20A P4KE22 P4KE22A P4KE24 P4KE24A P4KE27 P4KE27A P4KE30 P4KE30A P4KE33 P4KE33A P4KE36 P4KE36A P4KE39 P4KE39A P4KE43 P4KE43A P4KE47 P4KE47A P4KE51 P4KE51A P4KE56 P4KE56A 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.9 48.5 50.4 53.2 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.6 58.8 10.0 10.0 10.0 10.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 1000.0 1000.0 500.0 500.0 200.0 200.0 50.0 50.0 10.0 10.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 50. 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 37.0 38.1 34.2 35.4 32.0 33.1 29.0 29.9 26.7 27.6 24.7 25.6 23.1 24.0 21.1 22.0 18.2 18.9 17.0 17.8 15.1 15.9 13.7 14.4 12.5 13.1 11.5 12.0 10.2 10.7 9.2 9.7 8.4 8.8 7.7 8.0 7.1 7.4 6.5 6.7 5.9 6.2 5.4 5.7 5.0 5.2 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.5 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.078 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103 Device Type Breakdown Voltage V(BR) (Volts)(NOTES 1) MIN MAX Test Current IT(mA) Stand-off Voltage VWM (Volts) Maximum Reverse Leakage atVWM ID(NOTE3)(µA) Maximum Peak Pulse Reverse Current IPPM(NOTE2) (Amps) Maximum Clamping Voltage at IPPM Vc(Volts) Maximum Temperature Coefficient of V(BR) (%/ C)

Rev:2019A0 Page :3https://www.microdiode.com P4KE62 P4KE62A P4KE68 P4KE68A P4KE75 P4KE75A P4KE82 P4KE82A P4KE91 P4KE91A P4KE100 P4KE100A P4KE110 P4KE110A P4KE120 P4KE120A P4KE130 P4KE130A P4KE150 P4KE150A P4KE160 P4KE160A P4KE170 P4KE170A P4KE180 P4KE180A P4KE200 P4KE200A P4KE220 P4KE220A P4KE250 P4KE250A P4KE300 P4KE300A P4KE350 P4KE350A P4KE400 P4KE400A P4KE440 P4KE440A 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 90.0 95.0 99.0 105 108 114 117 124 135 143 144 152 153 162 162 171 180 190 198 209 225 237 270 285 315 332 360 380 396 418 4.5 4.7 4.1 4.3 3.7 3.9 3.4 3.5 3.1 3.2 2.8 2.9 2.5 2.6 2.3 2.4 2.1 2.2 1.9 1.9 1.7 1.8 1.6 1.7 1.6 1.6 1.4 1.5 1.2 1.2 1.1 1.2 0.93 1.0 0.79 0.83 0.70 0.73 0.63 0.66 89.0 85.0 98.0 92.0 108 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 344 328 360 344 430 414 504 482 574 548 631 602 0.104 0.104 0.104 0.104 0.105 0.105 0.105 0.105 0.106 0.106 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 Device Type Breakdown Voltage V(BR) (Volts)(NOTES 1) MIN MAX Test Current IT(mA) Stand-off Voltage VWM (Volts) Maximum Reverse Leakage atVWM ID(NOTE3)(µA) Maximum Peak Pulse Reverse Current IPPM(NOTE2) (Amps) Maximum Clamping Voltage at IPPM Vc(Volts) Maximum Temperature Coefficient of V(BR) (%/ C) 66.8 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100 95.5 110 105 121 116 132 126 143 137 165 158 176 168 187 179 198 189 220 210 242 231 275 267 330 315 385 368 440 420 484 462 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 175 185 202 214 243 256 284 300 324 342 356 376 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 NOTES: 1.V(BR)measured after IT applied for 300µs,IT=square wave pulse or equivalent Surge current waveform per Fig.3 and derated per Fig.22. 3.For bidirectional types having VWM of 10 volts and less,the ID limit is doubled 4.All items and symbols are consistent with ANSI/IEEE C62.35 P4KE6.8 THRU P4KE440CA Breakdown Voltage:6.8-440 Volts Peak Pulse Power:400 Watts

Rev:2019A0 Page :4https://www.microdiode.com RATINGS AND CHARACTERISTIC CURVES P4KE6.8 THRU P4KE440CA Breakdown Voltage:6.8-440 Volts Peak Pulse Power:400 Watts 150 100 1. 2 0 1.0 td,PULSE WIDTH,sec. FIG.3-PULSE WAVEFORM 100 1.0 0.1 0.1µs s 1.µs 1 µs 100µs 1.0m1.0ms FIG. 1-PEAK PULSE POWER RATING CURVE 10,000 1,000 100 1.0 1.0 11.0 FIG. 4-TYPICAL JUNCTIONAL CAPACITANCE UNIDIRECTIONAL FIG.6-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY V(BR),BREAKDOWN VOLTAGE,VOLTS NUMBER OF CYCLES AT 60Hz 100 0 0 2 0 50 2 0 250 0 0 FIG. 2-PULSE DERATING CURVE TA, AMBIENT TEMPERATURE,( C) 10100 200 10 100 0.1 0.01 TL,LEAD TEMPERATURE, C FIG.7-TYPICAL REVERSE LEAKAGE CHARCTERISTICS V(BR),BREAKDOWN VOLTAGE,VOLTS 1.00 0.75 0.50 0.25 2 0 0 0 0 250 0 50 2 0 t,TIME,ms FIG.5-STEADY STATE POWER DERATING CURVE INSTANTANEOUS REVERSE LEAKAGE CURRENT,MICROAMPERES PM(AV),STEADY STATE POWER DISSIPATION,WATTS IppM,PEAK PULSE CURRENT,% PppM,PEAK PULSE POWER,kw IFSM,PEAK FORWARD SURAGE CURRENT AMPERES CJ,JINCTION CAPACITANCE,pF PEAK PULSE POWER(PppM)or CURRENT(IppM) DERATING IN PERCENTAGE,% NON-REPETITIVE PULSE WAVEFORM SHOWN inFIG.3 TA=25 =25 TJ=25 C f=1.0Mhz Vsig=50mVp-p MEASURED at ZERO BIAS TJ=TJmax. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TA=25 C MEASURED AT DEVICES STAND-OFF VOLTAGE,Vwm L=0.375” (9.5mm) lLEAD LENGTHS 1.6 1.6 1.6 0.040” (40 (40 40 1 COPPER HEAT T SINK RESISTIVE60Hz OR INDUCTIVE LOAD 10/1000µsec WAVEFORM as DFINED by R.E.A. PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of IppM PEAK VALUE IppM tr=10µsec MEASURED at STAND-OFF VOLTAGE,VwM td HALF VALUE IPPM The cruve graph is for reference only