P4KE6.8 MIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPERSSOR E-mail: sales@cnmic.com Web Site: www.cnmic.com P4KE6.8 THRU P4KE440CA(GPP) Breakdown Voltage 6.8 to 400 Volts P4KE6.8J THRU P4KE440CAJ(OPEN JUNCTION) Peak Pulse Power 400 Watts

FEATURES

  • Plastic package has Underwriters Laboratory Flammability Classification 94V-O
  • Glass passivated or silastic guard junction (open junction)
  • 400W peak pulse power capability with a 10/1000μs Waveform, repetition rate (duty cycle): 0.0%1
  • Excellent clamping capability
  • Low incremental surge resistance
  • Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for unidirectional and 5.0ns for bidirectional types
  • Devices with V(BR)≥10V, ID are typically ID less than 1.0μA
  • High temperature soldering guaranteed: 265℃/10 seconds, 0.375” (9.5mm) lead length, 51bs.(2.3kg) tension MECHANICAL DATA
  • Cass: JEDEC DO-204AL,molded plastic body over passivated junction
  • Terminals: Axial leads, solderable per MIL-STD-750, Method 2026
  • Polarity: Color bands denotes positive end (cathode) except for bidirectional types
  • Mounting position: any
  • Weight: 0.012 ounces, 0.3 gram DEVICES FOR BIDRECTIONAL APPLICATIONS
  • For bidirectional use C or CA suffix for types P4KE7.5 THRU TYPES P4K440 (e.g. P4KE7.5CA, P4KE440CA).Electrical Characteristics apply in both directions.
  • Suffix A denotes ±5% tolerance device, No suffix A denotes ±10% tolerance device MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
  • Ratings at 25℃ ambient temperature unless otherwise specified Ratings Symbols Value Unit Peak Pulse power dissipation with a 10/1000μs waveform(NOTE1,FIG.1) PPPM Minimum 400 Watts Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.3) IPPM See Table 1 Watt Steady Stage Power Dissipation at TT=75℃ Lead lengths 0.375”(9.5)(Note2) PM(AV) 1.0 Amps Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) (Note3) IFSM 40.0 Amps Maximum instantaneous forward voltage at 25A for unidirectional only (NOTE 3) VF 3.5/6.5 Volts Operating Junction and Storage Temperature Range T J, TSTG 50 to +150 ℃ Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.2 2. Mounted on copper pads to each terminal of 0.31 in (8.0mm2) per Fig 5. 3. Measured at 8.3ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minutes maximum. DIA. DIA. Dimensions in inches and (millimeters) DO-41 .080(2.0) .107(2.7) .028(0.7) .034(0.9) MIN. 1.0(25.4) MIN. 1.0(25.4) .165(4.2) .205(5.2)

PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPERSSOR E-mail: sales@cnmic.com Web Site: www.cnmic.com P4KE6.8 THRU P4KE440CA(GPP) Breakdown Voltage 6.8 to 400 Volts P4KE6.8J THRU P4KE440CAJ(OPEN JUNCTION) Peak Pulse Power 400 Watts Breakdown Voltage V(BR)(Volts) (Note 1) Device Type MIN MAX Test Current at IT (mA) Stand-off Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID (μA) Maximum Peak Pulse Current IPPM (Note 2) (Amps) Maximum Clamping Voltage at IPPM VC(Volts) Maximum Temperature Coefficient of V(BR) (%/℃) P4KE10/J 9 11 1 8.1 10 26.7 15 0.076 P4KE20/J 18 22 1 16.2 5 13.7 29.1 0.093 P4KE20A/J 19 21 1 17.1 5 14.4 27.7 0.093 P4KE30/J 27 33 1 24.3 5 92 43.5 0.1

PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPERSSOR E-mail: sales@cnmic.com Web Site: www.cnmic.com P4KE6.8 THRU P4KE440CA(GPP) Breakdown Voltage 6.8 to 400 Volts P4KE6.8J THRU P4KE440CAJ(OPEN JUNCTION) Peak Pulse Power 400 Watts Electrical Characteristic at (TA =25℃ unless otherwise noted) TABLE 1 (Cont’d) Breakdown Voltage V(BR)(Volts) (Note 1) Device Type MIN MAX Test Current at IT (mA) Stand-off Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID (μA) (Note3) Maximum Peak Pulse Current IPPM (Note 2) (Amps) Maximum Clamping Voltage at IPPM VC(Volts) Maximum Temperature Coefficient of V(BR) (%/℃) P4KE91/J 81.9 100 1 73.7 5 3.1 131 0.106 P4KE100J/ 90 110 1 81 5 2.8 144 0.106 P4KE100A/J 95 105 1 85.5 5 2.9 137 0.106 P4KE110/J 99 121 1 89.2 5 2.5 158 0.107 P4KE110A/J 105 116 1 94 5 2.6 152 0.107 P4KE120/J 108 132 1 97.2 5 2.3 173 0.107 P4KE120A/J 114 126 1 102 5 2.4 165 0.107 P4KE130/J 117 143 1 105 5 2.1 187 0.107 P4KE130A/J 124 137 1 111 5 2.2 179 0.107 P4KE150/J 135 165 1 121 5 1.9 215 0.108 P4KE150A/J 143 159 1 128 5 1.9 207 0.108 P4KE160/J 144 175 1 130 5 1.7 230 0.108 P4KE160A/J 152 167 1 136 5 1.8 219 0.108 P4KE170/J 153 187 1 138 5 1.6 244 0.108 P4KE170A/J 162 179 1 145 5 1.7 234 0.108 P4KE180/J 162 197 1 146 5 1.6 258 0.108 P4KE180A/J 171 189 1 154 5 1.6 246 0.108 P4KE200/J 180 220 1 162 5 1.4 287 0.108 P4KE200A/J 190 210 1 171 5 1.5 274 0.108 P4KE220/J 198 242 1 175 5 1.2 344 0.108 P4KE220A/J 209 231 1 185 5 1.2 328 0.108 P4KE250/J 25 275 1 202 5 1.1 360 0.11 P4KE250A/J 237 267 1 214 5 1.2 344 0.11 P4KE300/J 270 330 1 243 5 0.93 430 0.11 P4KE300A/J 285 315 1 245 5 1 414 0.11 P4KE350/J 315 385 1 284 5 0.79 504 0.11 P4KE350A/J 332 368 1 300 5 0.83 482 0.11 P4KE400/J 360 440 1 324 5 0.7 574 0.11 P4KE400A/J 380 420 1 342 5 0.73 548 0.11 P4KE440/J 396 484 1 356 5 0.63 631 0.11 P4KE440A/J 418 462 1 376 5 0.66 602 0.11 Notes: (1) V(BR) measured after IT applied for 300ms IT =square wave pulse or equivalent (2) Surge current waveform per Figure 3 and derate per Fig.2 (3) For bidirectional type having VWM of 10 volts and less, the lD limit is doubled (4) All terms and symbols are consistent with ANSI/IEEE C62.35 (5) No suffix is Gpp passivated junction, Suffix “J” is open junction (silastic guard junction)

PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPERSSOR E-mail: sales@cnmic.com Web Site: www.cnmic.com P4KE6.8 THRU P4KE440CA(GPP) Breakdown Voltage 6.8 to 400 Volts P4KE6.8J THRU P4KE440CAJ(OPEN JUNCTION) Peak Pulse Power 400 Watts RATING AND CHARACTERISTIC CURVES P4KE6.8/J THRU P4KE440CA/J td COPPER HEAT SINKS (40×40×1mm) 1.6×1.6×.040" WMVOLTAGE, V STAND-OFF HEASURED AT DEVICES LEAD LENGTHS L = 0.375" (9.5mm) Resistive or induction load 60 Hz TA=25 ℃ TJ=TJ max 8.3ms Single Half Since-Wave JEDEC Method V MWVoltage ( ) Stand-Off Measured at Zero Blas Measured at TJ=25 ℃ f = 1.0MHz Vsig = 50mVp-p tf=10use lppm Peak Value Half Value-lpp 10/1000usec Waveform as Defined by R.E.A. Shown in Figure 3 TA=25 ℃ Pulse Waveform Non-Repetitive Current Decays to 50% of lpp Pulse Width (td)is Defined as the Point Where the Peak CURRENT, MICROAMPERES INSTANTANEOUS REVERSE LEAKAGED,i (BR)V ,BREAKDOWN VOLTAGE, VOLTS FIG.7- TYPICAL REVERSE LEAKAGE CHARACTERISTICS NUMBER OF CYCLES AT 60 Hz FSM,I PEAK FORWARD SURGE CURRENT, AMPERES FIG.6 - MAXMIUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY LT ,LEAD TEMPERATURE ℃ (AV),PM STEADY STATE POWER DISSIPATION, WATTS FIG.5- STEADY STATE POWER DERATING CURVE VOLTSV ,BREALDOWN VOLTAGE,(BR) UNIDIRECTIONAL FIG.4- TYPICAL JUNCTION CAPACITANCE CJ, JUNCTION CAPACITANCE, pF t, TIME, ms IPPM, PEAK PULSE CURRENT-% AT , AMBIENT TEMPERATURE (℃) DERATING IN PERCENTAGE % PEAK PULSE POWER ( )PPP OR CURRENT( )IPP t ,PULSE WIDTH, SECd PEAK PULSE POWER, kWPPPM, FIG.3- PULSE WAVEFORM FIG.2- PULSE DERATING CURVEFIG.1- PEAK PULSE POWER RATING CURVE 100 0.1 0.01 5004003002001000 0.75 0.25 0.50 1.00 2001751501251007550250 1 10 100 100,000 200100101.0 10,000 1000 4.03.02.01.00 100 150 1.0ms100μs10μs1.0μs0.1μs 10ms 100 0.1 1.0 2001751501251007550250 100