P4KE10

P4KE6.8 BILIN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

FEATURES

Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Glass passivated junction 400W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01% Excellent clamping capability Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for uni-directional and 5.0ns for bi-directional types Devices with V(BR) 10V ID are typically ID less than 1.0 μA High temperature soldering guaranteed:265 / 10 seconds, 0.375"(9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Case:JEDEC DO-41, molded plastic body over passivated junction Terminals: Axial leads, solderable per MIL-STD-750, method 2026 Polarity: Foruni-directional types the color band denotes the cathode, which is postitive with respect to the anode under normal TVS operation Weight: 0.012 ounces, 0.34 grams Mounting position: Any Maximum Instantaneous Forw ard Voltage at 25A for unidirectional only (NOTE 4) IFSM 40.0 3.5/5.0 (4) VF=3.5 Volt max. for devices of V(BR) 220V, and VF=5.0 Volt m ax. for devices of V(BR) >220V Operating Junction and Storage Temperature Range TJ, TSTG -50---+175 (3) Measured of 8.3ms single half sine-w ave or equare w ave, duty cycle=4 pulses per minute maximum (2) Mounted on copper pad area of 1.6" x 1.6"(40 x40mm2) per Fig. 5 NOTE S: (1) Non-repetitive current pules, per Fig. 3 and derated above TA=25 per Fig. 2 Steady State Pow er Dissipation at TL=75 fffff Lead Lengths 0.375"(9.5mm) (NOTE 2) PM(AV) 1.0 W A VVF Peak Forw ard Surge Current, 8.3ms Single half ffff Sine-Wave Superimposed on Rated Load (JEDEC Method) (NOTE 3) Peak Pulse Current with a 10/1000μs waveform (NOTE 1) IPPM See table 1 A Peak Power Dissipation with a 10/1000μs waveform (NOTE 1, FIG.1) PPPM Minimum 400 W P4KE6.8 --- P4KE440CA TRANSIENT VOLTAGE SUPPRESSORBREAKDOWN VOLTAGE: 6.8 --- 440 V PEAK PULSE POWER: 400 W DEVICES FOR BIDIRECTIONAL APPLICATIONS Electrical characteristics apply in both directions. UNITVALUESYMBOL MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. BLGALAXY ELECTRICALDocument Number 0285001 1. www.galaxycn.com BL DO - 41

BLGALAXY ELECTRICALDocument Number 0285001 2. Min Max P4KE 6.8 6.12 7.48 10 P4KE 6.8A 6.45 7.14 10 P4KE 7.5 6.75 8.25 10 P4KE 7.5A 7.13 7.88 10 P4KE 8.2 7.38 9.02 10 P4KE 8.2A 7.79 8.61 10 P4KE 9.1 8.19 10.0 1.0 P4KE 9.1A 8.65 9.55 1.0 P4KE 10 9.00 11.0 1.0 P4KE 10A 9.50 10.5 1.0 P4KE 11 9.90 12.1 1.0 P4KE 11A 10.5 11.6 1.0 P4KE 12 10.8 13.2 1.0 P4KE 12A 11.4 12.6 1.0 P4KE 13 11.7 14.3 1.0 P4KE 13A 12.4 13.7 1.0 P4KE 15 13.5 16.5 1.0 P4KE 15A 14.3 15.8 1.0 P4KE 16 14.4 17.6 1.0 P4KE 16A 15.2 16.8 1.0 P4KE 18 16.2 19.8 1.0 P4KE 18A 17.1 18.9 1.0 P4KE 20 18.0 22.0 1.0 P4KE 20A 19.0 21.0 1.0 P4KE 22 19.8 24.2 1.0 P4KE 22A 20.9 23.1 1.0 P4KE 24 21.6 26.4 1.0 P4KE 24A 22.8 25.2 1.0 P4KE 27 24.3 29.7 1.0 P4KE 27A 25.7 28.4 1.0 P4KE 30 27.0 33.0 1.0 P4KE 30A 28.5 31.5 1.0 P4KE 33 29.7 36.3 1.0 P4KE 33A 31.4 34.7 1.0 P4KE 36 32.4 39.6 1.0 P4KE 36A 34.2 37.8 1.0 P4KE 39 35.1 42.9 1.0 P4KE 39A 37.1 41.0 1.0 P4KE 43 38.7 47.3 1.0 P4KE 43A 40.9 45.2 1.0 P4KE 47 42.3 51.7 1.0 P4KE 47A 44.7 49.4 1.0 P4KE 51 45.9 56.1 1.0 P4KE 51A 48.5 53.6 1.0 P4KE 56 50.4 61.6 1.0 P4KE 56A 53.2 58.8 1.0 0.103 45.4 5.0 5.0 80.5 0.102 41.3 5.0 5.4 73.5 0.101 38.1 5.0 5.9 67.8 0.101 34.8 5.0 6.5 61.9 Maximum reverse leakge at V WM I D (NOTE3)( μA ) Maximum peak pulse IPPM(NOTE2) (A) Maximum clamping voltage at IPPM V C(V) Maximum temperature coefficient of V (BR) (%/ Breakdow n voltage V (BR) (V) (NOTE1) Test current at IT (mA) 33.3 5.0 25.6 5.0 11.1 5.0 5.0 Stand-off voltage V WM (V) 0.099 30.8 5.0 8.0 49.9 0.099 28.2 5.0 8.8 45.7 29.1 5.0 7.7 52.0 0.088 13.6 5.0 0.098 17.8 22.5 0.086 5.0 11.5 34.7 12.8 5.0 9.7 41.4 14.5 5.0 15.1 26.5 12.9 5.0 17.0 23.5 22.0 0.084 0.084 0.086 22.0 18.2 0.081 5.0 12.0 33.2 5.0 25.2 18.9 21.2 0.078 5.0 21.1 19.0 0.081 5.0 24.0 12.1 17.8 5.0 12.5 31.9 10.5 10.2 16.7 12.1 5.0 13.4 15.0 24.3 5.0 5.0 5.0 5.0 9.2 24.7 10.2 10.85.50 1000 37.0 10.5 11.7 11.3 12.5 9.40 5.80 6.05 6.40 6.63 7.02 8.92 7.37 7.78 8.10 5.0 5.0 200 14.4 1000 500 500 200 5.0 15.9 18.2 25.6 38.1 34.2 35.4 32.0 33.1 16.2 15.6 17.3 29.0 29.9 26.7 27.6 23.1 13.8 0.09743.5 0.097 37.5 29.1 27.7 10.7 13.7 13.1 30.6 39.1 0.096 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.057 0.057 0.061 0.073 0.061 0.065 0.065 8.55 0.068 0.068 9.72 0.073 0.075 0.075 0.076 14.5 5.0 18.8 21.8 20.5 19.4 ELECTRICAL CHARACTERISTICS at(T A=25 unless otherwise noted) TABLE 1 Device type 7.4 53.9 0.100 23.1 16.2 17.1 15.3 www.galaxycn.com

P4KE 62 55.8 68.8 1.0 P4KE 62A 58.9 65.1 1.0 P4KE 68 61.2 74.8 1.0 P4KE 68A 64.6 71.4 1.0 P4KE 75 67.5 82.5 1.0 P4KE 75A 71.3 78.8 1.0 P4KE 82 73.8 90.2 1.0 P4KE 82A 77.9 86.1 1.0 P4KE 91 81.9 100 1.0 P4KE 91A 86.5 95.5 1.0 P4KE 100 90.0 110 1.0 P4KE 100A 95.0 105 1.0 P4KE 110 99.0 121 1.0 P4KE 110A 105 116 1.0 P4KE 120 108 132 1.0 P4KE 120A 114 126 1.0 P4KE 130 117 143 1.0 P4KE 130A 124 137 1.0 P4KE 150 135 165 1.0 P4KE 150A 143 158 1.0 P4KE 160 144 176 1.0 P4KE 160A 152 168 1.0 P4KE 170 153 187 1.0 P4KE 170A 162 179 1.0 P4KE 180 162 198 1.0 P4KE 180A 171 189 1.0 P4KE 200 180 220 1.0 P4KE 200A 190 210 1.0 P4KE 220 198 242 1.0 P4KE 220A 209 231 1.0 P4KE 250 225 275 1.0 P4KE 250A 237 267 1.0 P4KE 300 270 330 1.0 P4KE 300A 285 315 1.0 P4KE 350 315 385 1.0 P4KE 350A 332 368 1.0 P4KE 400 360 440 1.0 P4KE 400A 380 420 1.0 P4KE 440 396 484 1.0 P4KE 440A 418 462 1.0 NOTE: (1) V(BR) measured after IT applied for 300 s, IT=square w ave pulse or equivalent (2) Surge current w aveform per Fig. 3 and derated Fig. 2 (3) For bidirectional types having VWM of 10 volts and less, the ID limit is doubled (4) All terms and symbols are consistent w ith ANSI/IEEE C62.35 ELECTRICAL CHARACTERISTICS at(TA=25 unless otherwise noted) TABLE 1(Cont' d) Device type 0.73 548 0.110 185 138 145 136 154 175 171 162 77.8 0.105 0.105 89.2 0.106 0.106 0.106 0.107 125 5.0 0.104 0.104 0.104 0.106 0.104 0.105 0.105 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 328 244 234 1.2 1.6 1.6 246 344 0.110360 0.110 243 5.0 0.93 430 0.110 3.9 144 137 158 3.4 3.5 3.1 3.2 2.5 118 4.7 4.1 4.3 3.7 5.0 1.7 5.0 5.0 5.0 5.0 5.0 1.8 2.1 2.95.0 5.0 5.0 5.0 5.0 5.0 85.5 53.0 55.1 58.1 60.7 64.1 81.0 66.4 70.1 73.7 85.0 98.0 92.0 108 89.050.2 5.0 4.5 113 131 202 5.0 5.0 5.0 5.0 1.1 2.8 1.2 103 146 5.0 1.6 258 97.2 94.0 152 105 5.0 0.107 5.0 2.3 173 0.107 5.0 2.6 2.4 165 0.107 5.0 1.5 274 5.0 219 2.2 179 1.9 215 187 0.107 0.107 0.108 111 5.0 1.2 344 130 5.0 1.7 230 121 5.0 0.108 128 5.0 0.110 1.9 207 0.108 5.0 1.4 287 0.110 256 5.0 1.0 414 284 5.0 0.79 504 0.110 324 5.0 0.70 574 0.110 300 5.0 0.83 482 Breakdow n voltage V (BR) (V) (NOTE1) Test current at IT (mA) 342 5.0 214 5.0 102 5.0 5.0 Stand-off voltage VWM (V) Max imum reverse leakge at VWM ID (NOTE3)( μA) Max imum peak pulse IPPM(NOTE2) (A) Max imum clamping voltage at IPPM VC(V) Max imum temperature coefficient of V (BR) (%/ 0.110 376 5.0 0.66 602 0.110 356 5.0 0.63 631 BLGALAXY ELECTRICALDocument Number 0285001 3. www.galaxycn.com

0.1 0.01 0 500 400300200100 TA=25℃ MEASURED ATDEVICES STAND-OFF VOLTAGE, VWM 100.000 1.0 100 10 10.000 1000 200 MEASURED at ZEROBIAS TJ=25℃ f=1.0MHZ Vsig=50mVp-p MEASURED at STAND-OFF VOLTAGE, VWM 150 100 02 . 0 1.0 3.0 4.0 PEAK VALUE IPPM HALF VALUE - I PPM PULES WIDTH (td) is DEFINDE as the POINT WHERE the PEAK CURRENT DECAYS to 50% of I PPM 10/1000µ s WAVEFORM as DEFINDE by R.E.A. td tr=10µ s PPPM, PEAK PULSE POWER, KW RATINGS AND CHARACTERISTIC CURVES P4KE6.8 -- P4KE440CA TL, LEAD TEMPERATURE, ℃ FIG.2 -- PULSE DERATING CURVE IPPM, PEAK PULSE CURRENT, % (IPPM) DERATING IN PERCENTAGE, % t ol, PULSE WIDTH, SEC. ID, INSTANTANEOUS REVERSE FIG.3 -- PULSE WAVEFORM FIG.4 -- TYPICAL JUNCTION CAPACITANCE H HHHHHHHH HUNIDIRECTIONAL PEAK PULSE POWER (PPP) OR CURRENT TA , A MBIENT TEMPERA TURE. ℃ FIG.1 -- PEAK PULSE POWER RATING CURVE LEAKAGE CURRENT, mA DISSIPATION, W V(BR), BREAKDOWN VOLTAGE, V IFSM, PEAK FORWARD SURGE CURRENT, A PM(AV), STRADY STATE POWER FIG.7 -- TYPICAL REVERSE LEAKAGE JJJJJJJJJJJJJJJJJJCHARACTERISTICS FIG.6 -- MAXIMUN NON-REPETITIVE FORWARD HHHH HSURGE CURRENT UNIDIRECTIONAL ONLY CJ, JUNCTION CAPACITANCE, Pf FIG.5 -- STEADY STATE POWER DERATING CURVE t, TIM E , m s BLGALAXY ELECTRICAL www.galaxycn.com Document Number 0285001 4. V(BR), BREAKDOWN VOLTAGE, V NUMBER OF CYCLES AT 60 Hz 100 1.0 0.1 0.1µs 1.0µs 10µs 100µs 1ms 10ms NON-REPETITIVE PULSE WAVEFORM SHOWN if FIG.3 TA=25℃ 100 0 25 50 75 100 125 150 175 200 02 5 5 07 5 0.75 1.00 0.50 0.25 125100 150 200 175 1.6 x 1.6 x .040" (40 x 40 x 1mm.) COPPER HEAT SINKS 60 HZ RESISTIVEOR INDUCTIVE LOAD L=0.375"(9.5mm) LEAD LENGTHS 11 0 0 10 TJ=TJ max. 8.3ms SINGLE HALF SINE-MAVE (JEDEC METHOD)