P4KE10

P4KE6.8 DAESAN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Features

• Plastic package has Underwriters Laboratory Flammability Classification 94V-0
• Glass passivated junction
• 400W peak pulse power capability with a 10/100¥ìS waveform, reptition rate(duty cycle) : 0.01%
• Excellent clamping capability
• Low incremental surge resistance
• Fast response time : typically less than 1.0ps from 1 Volts to V(BR) for uni-directional and 5.0ns for Bi-directional types
• Devices with V(BR) > 10V, ID are typically less than 1.0¥ìA
• High temperature soldering guaranteed : 265¡É/10seconds, 0.375"(9.5mm) lead length, 5lbs. (2.3kg) tension Devices For Bidirectional Applications Maximum Ratings And Electrical Characteristics
• For bi-directional use C or CA suffix for types P4KE7.5 thru types P4KE440CA(e.g. P4KE10C, P4KE220CA), electrical characteristics apply in both directions.
• Case : DO-41 molded plastic body over passivated junction
• Terminals : Solder plated axial leads, solderable per MIL-STD-750, method 2026
• Polarity : For uni-directional types the color band denotes cathode end. which is positive with respect to the anode under normal TVS operation
• Mounting Position : Any
• Weight : 0.012 ounce, 0.34 gram Peak power dissipation with a 10/100¥ìS waveform (Note 1. Fig. 3) Peak pulse current with a 10/100¥ìS waveform (Note 1) Steady state power dissipation at TL=75¡É lead length 0.375"(9.5mm) (Note2) VoltsMaximum instantaneous forward voltage at 25A for unidirectional only(Note4) PM(AV) Peak forward surge current, 8.3mm single half sine-wave superimposed on rated load(JEDEC method) (Note 3) Operating junction and storage temperature range PPPM Min.400 Watts Symbols Values Units 3.5/50VF IPPM See Table 1 Amps 1.0 IFSM TJ,TSTG 40.0 -55 to +175 ¡É Watts Amps (Ratings at 25¡É ambient temperature unless otherwise specified) Notes: (1) Non repetitive current pulse, per Fig.3 and derated above TA=25¡É per Fig.2 (2) Mounted on copper pads area of 1.6¡¿1.6"(40¡¿40mm) per Fig.5 (3) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulse per minute maximum (4) VF=3.5 Volts max. for devices of V(BR)¡Â220V, and VF=5.0 Volts max. for devices of V(BR)>220V POWER 400Watts VOLTAGE 6.8 to 440 Volts Dimensions in inches and (millimeters) DO-41 1.0(25.4) MIN. 1.0(25.4) MIN. 0.205(5.2) 0.166(4.2) 0.034(0.9) 0.028(0.7) DIA. 0.107(2.7) 0.080(2.0) DIA.

ELECTRICAL CHARACTERISTIC at (TA=25¡É unless other specified) Breakdown Voltage V(BR) (Volts) (Note 1)Device Type Test Current at IT (mA) Stand-off Voltage VWM (Volts) P4KE6.8 6.12 P4KE6.8A 6.45 P4KE7.5 6.75 P4KE7.5A 7.13 P4KE8.2 7.38 P4KE8.2A 7.79 P4KE9.1 8.19 P4KE9.1A 8.65 P4KE10 9.00 P4KE10A 9.50 P4KE11 9.90 P4KE11A 10.5 P4KE12 10.8 P4KE12A 11.4 P4KE13 11.7 P4KE13A 12.4 P4KE15 P4KE15A P4KE16 14.4 P4KE16A 15.2 P4KE18 16.2 P4KE18A 17.1 P4KE20 18.0 P4KE20A 19.0 P4KE22 19.8 P4KE22A 20.9 P4KE24 21.6 P4KE24A 22.8 P4KE27 24.3 P4KE27A P4KE30 P4KE30A P4KE33 P4KE33A P4KE36 P4KE36A P4KE39 P4KE39A P4KE43 P4KE47 P4KE51 P4KE56 P4KE43A P4KE47A P4KE51A P4KE56A 13.5 14.3 25.7 27.0 28.5 29.7 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.9 48.5 50.4 53.2 31.4 32.4 Max. 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 16.5 15.8 28.4 33.0 31.5 36.3 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.6 58.8 34.7 39.6 Min. Max. Reverse Leakage at VWM ID(Note2) (¥ìA) Max. Peak Pulse Current IPPM(Note 2) (Amps) Max. Clamping Voltage at IPPM VC(VOLTS) Max. Temp Coefficient of V(BR) (%/¡É) 10 5.50 10 5.80 10 6.05 10 6.40 10 6.63 10 7.02 1.0 7.37 1.0 7.78 1.0 8.10 1.0 8.55 1.0 8.92 1.0 9.40 1.0 9.72 1.0 10.2 1.0 10.5 1.0 11.1 1.0 1.0 1.0 12.9 1.0 1.0 13.6 14.5 1.0 15.3 1.0 16.2 1.0 17.1 1.0 17.8 1.0 18.8 1.0 19.4 1.0 20.5 1.0 21.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 12.1 12.8 23.1 24.3 25.6 26.8 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 28.2 29.1 1000 1000 500 500 200 200 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 37.0 10.8 38.1 10.5 34.2 11.7 35.4 11.3 32.0 12.5 33.1 12.1 29.0 13.8 29.9 13.4 26.7 15.0 27.6 14.5 24.7 16.2 25.6 15.6 23.1 17.3 24.0 16.7 21.1 19.0 22.0 18.2 18.2 18.9 17.0 23.5 17.8 22.5 15.1 26.5 15.9 25.2 13.7 29.1 14.4 27.7 12.5 31.9 13.1 30.6 11.5 34.7 12.0 33.2 10.2 39.1 10.7 9.2 9.7 8.4 8.8 7.7 8.0 7.1 7.4 6.5 5.9 5.4 5.0 6.7 6.2 5.7 5.2 22.0 21.2 37.5 43.5 41.4 47.7 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 45.7 52.0 0.057 0.057 0.061 0.061 0.065 0.060 0.068 0.068 0.073 0.073 0.075 0.075 0.076 0.078 0.081 0.081 0.086 0.086 0.088 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.084 0.084 0.096 0.097 0.097 0.098 0.099 0.100 0.100 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103 0.098 0.099

VF(BR) (Volts) (Note 1)Device Type Test Current at IT (mA) Stand-off Voltage VWM (Volts) P4KE62 55.8 P4KE62A 58.9 P4KE68 61.2 P4KE68A 64.6 P4KE75 67.5 P4KE75A 71.3 P4KE82 73.8 P4KE82A 77.9 P4KE91 81.9 P4KE91A 86.5 P4KE100 90.0 P4KE100A 95.0 P4KE110 99.0 P4KE110A 105 P4KE120 108 P4KE120A 114 P4KE130 P4KE130A P4KE150 135 P4KE150A 143 P4KE160 144 P4KE160A 152 P4KE170 153 P4KE170A 162 P4KE180 162 P4KE180A 171 P4KE200 180 P4KE200A 190 P4KE220 198 P4KE220A P4KE250 P4KE250A P4KE300 P4KE300A P4KE350 P4KE350A P4KE400 P4KE400A P4KE440 P4KE440A 117 124 209 225 237 270 333 360 380 396 418 285 315 Max. 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100 95.5 110 105 121 116 132 126 165 158 176 168 187 179 198 189 220 210 242 143 137 231 275 263 330 368 440 420 484 462 315 385 Min. Max. Reverse Leakage at VWM ID(Note2) (¥ìA) Max. Peak Pulse Current IPPM(Note 2) (Amps) Max. Clamping Voltage at IPPM VC(VOLTS) Max. Temp Coefficient of V(BR) (%/¡É) 50.2 53.0 55.1 58.1 60.7 64.1 1.0 66.4 1.0 70.1 1.0 73.7 1.0 77.8 1.0 81.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 85.5 1.0 89.2 1.0 94.0 1.0 97.2 1.0 102 1.0 1.0 1.0 121 1.0 128 130 1.0 1.0 136 1.0 138 1.0 145 1.0 146 1.0 154 1.0 162 1.0 171 1.0 175 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 105 111 185 202 214 243 300 324 342 356 376 256 284 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 4.5 89.0 4.7 85.0 4.1 98.0 4.3 92.0 3.7 108 3.9 103 3.4 118 3.5 113 3.1 131 3.2 125 2.8 144 2.9 137 2.5 158 2.6 152 2.3 173 2.4 165 2.1 2.2 1.9 215 1.9 207 1.7 230 1.8 219 1.6 244 1.7 234 1.6 258 1.6 246 1.4 287 1.5 274 1.2 344 1.2 1.1 1.2 0.93 1.0 0.79 0.83 0.70 0.73 0.63 0.66 187 179 328 360 344 430 482 574 548 631 602 414 504 0.104 0.104 0.104 0.104 0.105 0.105 0.105 0.105 0.106 0.106 0.106 0.106 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.107 0.107 0.108 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 Notes: (1) V(BR) measured after IT applied for 300¥ìS, IT=square wave pulse or equivalent. (2) Surge current waveform per Fig.3 and derated per Fig.2 (3) For bidirctional types having VWM of 10 Volts and less. The ID limit is doubled. (4) All terms and symbols are consistent with ANSI/IEEE C62.35 ELECTRICAL CHARACTERISTIC at (TA=25¡É unless other specified)

FIG.1-PEAK PULSE POWER RATING CURVE FIG.2-PULSE DERATING CURVE FIG.3-PULSE WAVEFORM FIG.4-TYPICAL JUNCTION CAPACITANCE UNIDIRECTIONAL FIG.5-STEADY STATE POWER DERATING CURVE FIG.6-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY td, PULSE WIDTH, sec. t, TIME, ms TL, LEAD TEMPERATURE (¡É) NUMBER OF CYCLES AT 60HZ V(BR), BREAKDOWN VOLTAGE, VOLTS TA, AMBIENT TEMPERATURE (¡É) PEAK PULSE POWER(PPP) OR CURRENT (IPPM) DERATING IN PERCENTAGE,% CJ,JUNCTION CAPACITANCE,pFIFSM, PEAK FORWARD SURGE CURRENT, AMPERES PM(AV), STEADY STATE POWER DISSIPATION, WATTS PPPM, PEAK PULSE current, % PPPM, PEAK PULSE POWER, KW 0.1 100 1.0 0.1mS 10mS1.0mS100mS10mS1.0mS 100 150 2.01.00 3.0 4.0 10075500 12525 150 200175 0.50 0.75 0.25 1.00 101 200 1001.0 10 200 10,000 1000 100,000 10075500 12525 150 200175 100 NON-REPETITIVE PULSE WAVEFORM SHOWN IN FIG.3 TA =25¡É TJ =25¡É f=1.0MHz Vsig=50mVp-p MEASURED at ZERO BIAS MEASURED at STAND-OFF VOLTAGE, VWM td PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of IPPM tr=10msec. PEAK VALUE IPPM 10/100msec.WAVEFORM as DEFINED by R.E.A. PEAK VALUE IPPM HALF VALUE-IPPM 60Hz RESISTIVE OR INDUCTIVE LOAD 1.6X1.6X0.040" (40X40X1mm) COPPER HEAT SINKS L=0.375"(9.5mm) LEAD LENGTHS TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) RATINGS AND CHARACTERISTIC CURVES P4KE6.8 THRU P4KE440CA

FIG7-TYPICAL REVERSE LEAKAGE CHARACTERISTICS V(BR), BREAKDOWN VOLTAGE, VOLTS 2001000 300 400 500440 ID, INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES 0.01 100 0.1 MEASURED AT DEVICES STAND-OFF VOLTAGE, VWM TA=25¡É RATINGS AND CHARACTERISTIC CURVES P4KE6.8 THRU P4KE440CA