P4KE

P4KE UNSEMI | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 7

Technical content

Features

Description

Uni-directional Bi-directional

Applications

Revision March 1,2022 Axial Lead Transient Voltage Suppressors (TVS) www.unsemi.com.tw

6.8 To 600V 400W

www.unsemi.com.tw Cathode Bi-directional Anode Uni-direction For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.1/6 Functional Diagram Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25°C per Fig. 2. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. 4. VF < 3.5V for VBR < 200V and VF< 6.5V for VBR > 201V. 400 See Next Table 1.0 3.5/5.0 -55 to +150 -40 to +125 PPPM IPP PM(AV) IFSM VF TJ ,TSTG TOP Peak Pulse Power Dissipation with a 10/1000µs waveform (Fig.1)(Note1), (Note 2) Peak Pulse Current with a 10/1000µs waveform.(Note1,Fig.3) Power dissipation on infinite heatsink at TL = 75℃ Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) Maximum Instantaneous Forward Voltage at 25A for Unidirectional Only (Note 4) Junction and storage temperature range Operating temperature range W A W A V Parameter Symbol Value Unit Maximum Ratings (TA =25℃ unless otherwise noted)

Axial Lead Transient Voltage Suppressors (TVS) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.2/6 P4KE Series Electrical Characteristics(TA=25℃ unless otherwise noted) (Continue) Part Number Uni Bi Reverse Stand-Off Voltage VRWM (V) Breakdown Voltage VBR (V) @IT Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Test Current IT (mA) MIN MAX 1000 1000 500 500 200 200 P4KE6.8 P4KE6.8A P4KE7.5 P4KE7.5A P4KE8.2 P4KE8.2A P4KE9.1 P4KE9.1A P4KE10 P4KE10A P4KE11 P4KE11A P4KE12 P4KE12A P4KE13 P4KE13A P4KE15 P4KE15A P4KE16 P4KE16A P4KE18 P4KE18A P4KE20 P4KE20A P4KE22 P4KE22A P4KE24 P4KE24A P4KE27 P4KE27A P4KE30 P4KE30A P4KE33 P4KE33A P4KE36 P4KE36A P4KE39 P4KE39A P4KE43 P4KE43A P4KE47 P4KE47A P4KE51 P4KE51A P4KE56 P4KE56A P4KE62 P4KE62A P4KE68 P4KE68A P4KE75 P4KE75A P4KE82 P4KE82A P4KE6.8C P4KE6.8CA P4KE7.5C P4KE7.5CA P4KE8.2C P4KE8.2CA P4KE9.1C P4KE9.1CA P4KE10C P4KE10CA P4KE11C P4KE11CA P4KE12C P4KE12CA P4KE13C P4KE13CA P4KE15C P4KE15CA P4KE16C P4KE16CA P4KE18C P4KE18CA P4KE20C P4KE20CA P4KE22C P4KE22CA P4KE24C P4KE24CA P4KE27C P4KE27CA P4KE30C P4KE30CA P4KE33C P4KE33CA P4KE36C P4KE36CA P4KE39C P4KE39CA P4KE43C P4KE43CA P4KE47C P4KE47CA P4KE51C P4KE51CA P4KE56C P4KE56CA P4KE62C P4KE62CA P4KE68C P4KE68CA P4KE75C P4KE75CA P4KE82C P4KE82CA 5.5 5.8 6.1 6.4 6.6 7.0 7.4 7.8 8.1 8.6 8.9 9.4 9.7 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 6.12 6.46 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.45 10.80 11.40 11.70 12.35 13.50 14.25 14.40 15.20 16.20 17.10 18.00 19.00 19.80 20.90 21.60 22.80 24.30 25.65 27.00 28.50 29.70 31.35 32.40 34.20 35.10 37.05 38.70 40.85 42.30 44.65 45.90 48.45 50.40 53.20 55.80 58.90 61.20 64.60 67.50 71.25 73.80 77.90 37.04 38.10 34.19 35.40 32.00 33.06 28.99 29.85 26.67 27.59 24.69 25.64 23.12 23.95 21.05 21.98 18.18 18.87 17.02 17.78 15.09 15.87 13.75 14.44 12.54 13.07 11.53 12.05 10.23 10.67 9.20 9.66 8.39 8.75 7.69 8.02 7.09 7.42 6.46 6.75 5.90 6.17 5.44 5.71 4.97 5.19 4.49 4.71 4.08 4.35 3.70 3.88 3.39 3.54 7.48 7.14 8.25 7.88 9.02 8.61 10.01 9.56 11.00 10.50 12.10 11.55 13.20 12.60 14.30 13.65 16.50 15.75 17.60 16.80 19.80 18.90 22.00 21.00 24.20 23.10 26.40 25.20 29.70 28.35 33.00 31.50 36.30 34.65 39.60 37.80 42.90 40.95 47.30 45.15 51.70 49.35 56.10 53.55 61.60 58.80 68.20 65.10 74.80 71.40 82.50 78.75 90.20 86.10 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 89.0 85.0 98.0 92.0 108.0 103.0 118.0 113.0

Axial Lead Transient Voltage Suppressors (TVS) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.3/6 P4KE Series Electrical Characteristics(TA=25℃ unless otherwise noted) (Continue) Part Number Uni Bi Reverse Stand-Off Voltage VRWM (V) Breakdown Voltage VBR (V) @IT Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Test Current IT (mA) MIN MAX Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double P4KE91 P4KE91A P4KE100 P4KE100A P4KE110 P4KE110A P4KE120 P4KE120A P4KE130 P4KE130A P4KE150 P4KE150A P4KE160 P4KE160A P4KE170 P4KE170A P4KE180 P4KE180A P4KE200 P4KE200A P4KE220 P4KE220A P4KE250 P4KE250A P4KE300 P4KE300A P4KE350 P4KE350A P4KE380 P4KE380A P4KE400 P4KE400A P4KE440 P4KE440A P4KE500 P4KE500A P4KE520 P4KE520A P4KE550 P4KE550A P4KE600 P4KE600A P4KE91C P4KE91CA P4KE100C P4KE100CA P4KE110C P4KE110CA P4KE120C P4KE120CA P4KE130C P4KE130CA P4KE150C P4KE150CA P4KE160C P4KE160CA P4KE170C P4KE170CA P4KE180C P4KE180CA P4KE200C P4KE200CA P4KE220C P4KE220CA P4KE250C P4KE250CA P4KE300C P4KE300CA P4KE350C P4KE350CA P4KE380C P4KE380CA P4KE400C P4KE400CA P4KE440C P4KE440CA P4KE500C P4KE500CA P4KE520C P4KE520CA P4KE550C P4KE550CA P4KE600C P4KE600CA 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102.0 105.0 111.0 121.0 128.0 130.0 136.0 138.0 145.0 146.0 154.0 162.0 171.0 175.0 185.0 202.0 214.0 243.0 256.0 284.0 299.3 308.6 324.9 324.8 342.0 357.3 376.2 406.0 427.5 422.2 444.6 446.6 470.3 487.2 513.0 81.90 86.45 90.00 95.00 99.00 10450 108.00 114.00 117.00 123.50 135.00 142.50 144.00 152.00 153.00 161.50 162.00 171.00 180.00 190.00 198.00 209.00 225.00 237.50 270.00 285.00 315.00 332.50 342.00 361.00 360.00 380.00 396.00 418.00 450.00 475.00 468.00 494.00 495.00 522.50 540.00 570.00 100.10 95.55 110.00 105.00 121.00 115.50 132.00 126.00 143.00 136.50 165.00 157.50 176.00 168.00 187.00 178.50 198.00 189.00 220.00 210.00 242.00 231.00 275.00 262.50 330.00 315.00 385.00 367.50 418.00 399.00 440.00 420.00 484.00 462.00 550.00 525.00 572.00 546.00 605.00 577.50 660.00 630.00 131.0 125.0 144.0 137.0 158.0 152.0 173.0 165.0 187.0 179.0 215.0 207.0 230.0 219.0 244.0 234.0 258.0 246.0 287.0 274.0 344.0 328.0 360.0 344.0 430.0 414.0 504.0 482.0 547.2 524.4 576.0 552.0 633.6 607.2 720.0 690.0 748.8 717.6 792.0 759.0 864.0 828.0 3.05 3.20 2.78 2.92 2.53 2.63 2.31 2.42 2.14 2.23 1.86 1.93 1.74 1.83 1.64 1.71 1.55 1.63 1.39 1.46 1.16 1.22 1.11 1.16 0.93 0.97 0.79 0.83 0.73 0.76 0.69 0.72 0.63 0.66 0.56 0.58 0.53 0.56 0.51 0.53 0.46 0.48

Axial Lead Transient Voltage Suppressors (TVS) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. P4KE Series Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve Figure 3 - Pulse Waveform Figure 4 - Typical Junction Capacitance Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Surge Current 0 25 50 75 100 125 150 175 100 TA-Ambient temperature(°C) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 150 100 IPPM - Peak Pulse Current, % IRSM tr=10 sec Peak Value IPPM Half Value IPPM (IPPM/2) tc 10/1000 sec. Waveform as defined by R.E.A 0 1.0 2.0 3.0 4.0 TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM t - Time (ms) 1.0 0 25 50 75 100 125 150 175 200 0.8 0.6 0.4 0.2 0.0 TL - Lead Temperature(°C) PM(AV), Steady State Power Dissipation (W) 100 td - Pulse Width (µs) PPPM - Peak Pulse Power (kW) 0.1 0.1 1 10 100 1000 10000 Number of Cycles at 60Hz IFSM-Peak Forward Surge Current (A) 1 10 100 TJ=TJ max. 8.3 ms Single Half Sine-Wave 1.0 10.0 100.0 1000.0 10000 1000 100 VBR-Reverse Breakdown Voltage (V) Cj (pF) Tj=25°C f=1.0MHz Vsig=50mVp-p Bi-directional @zero bins Uni-directional @zero bins Uni-directional @VRWM Bi-directional @VRWM

Axial Lead Transient Voltage Suppressors (TVS) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.5/6 P4KE Series V VC VBR VR IR VFIT IPP Uni-directional VVC VBR VR VCVBRVR IR IR IT IT IPP IPP Bi-directional Physical Specifications Environmental Specifications Weight Case Polarlty Terminal Color band denotes cathode except Bipolar JESD22-A104 JESD22-A102 JESD22-A103 JESD22-A108 JESD22-A106 Temperature Cycle Pressure Cooker High Temp. Storage HTRB Thermal Shock 0.012 ounce, 0.3 gram JEDEC DO-204AL (DO-41) Molded Plasticover glass passivated junction Matte Tin-plated leads, Solderable per JESD22-B102D Soldering Parameters Lead–free assembly 150°C 200°C 60 -180 Seconds 3°C/Second max 3°C/Second max 217°C 60 -150 Seconds 260 +0/-5°C 20-40 Seconds 6°C/Second Max 8 minutes Max 280°C Reflow Condition Pre Heat -Temperature Min (Ts(min)) -Temperature Max (Ts(max)) - Time (min to max) (TS) Average ramp up rate ( Liquidus Temp TL) to peak TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Time (min to max) (TS) Peak Temperature (TP) Do not exceed Time 25°C to peak Temperature (TP) Time within 5°C of actual peak Temperature (TP) Ramp-down Rate TimeTime to peak temperature ( T25℃ to peak) Preheat Ts(min) Ts(max) TL TL TP Temperature Ramp-up Ramp-down Critical Zone TL toTP TP Ts

Axial Lead Transient Voltage Suppressors (TVS) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. P4KE Series Packaging Dimensions Unit: Inches (Millimeters) 0.20±0.020 (5.00±0.508) P 4 K E ××× C A 2.56 (65.00) 0.25 (6.35) Dimensions DO-204AL (DO-41) Dimensions A B C D Min Max MaxMin Inches Millimeters 1.000 0.165 0.028 0.090 0.205 0.033 0.117 25.40 4.19 0.71 2.29 5.21 0.84 2.97 5% VBR VOLTAGE TOLERANCE BI-DIRECTIONAL VBR VOLTAGE SERIES

Ordering Information

Part Number Component Package Quantity Packaging Option P4KEXXXXX DO-204AL (DO-41) 3,000 BOX

Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Disclaimer ROHS UNSEMI RESERVES THE RIGHT TO MAKE CHANGE ON OUR PRODUTS , PRODUCTS SPECIFICATION AND DATA WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. UN SEMICONDUCTOR LIMITED its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “UNSEMI”)does not give any representations or warranties for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. In no event shall UNSEMI be liable for any indirect, incidental, punitive, special or consequential damages (including any and all implied warranties, warranties of fitness for particular purpose, non-infringement and merchantability.) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Statements regarding the suitability of products for certain types of applications are based on UNSEMI knowledge of typical requirements that are often placed on UNSEMI products in generic applications. Such statements are not binding, statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify UNSEMI's terms and conditions of purchase, including but not limited to the warranty expressed therein. Unless otherwise agreed in writing, UNSEMI product is not designed, authorized or warranted to be suitable for use in medical life-saving, or life-sustaining application , nor in applications where failure or malfunction of a UNSEMI product can reasonably be expected to result in personal injury, death or severe property or environmental damage. UNSEMI and its suppliers accept no liability for inclusion or use of UNSEMI products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. All referenced brands, product names, service names and trademarks are the property of their respective owners.