P4SMAJXX RECTRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS DO-214AC MAXIMUM RA TINGS (@ TA=25 OC unless otherwise noted) Dim ensions in inches and (millimeters)
FEATURES
- Plastic package has underwriters laboratory * Glass passivated chip construction *4 0 0 watt surage capability at 1ms * Ex cellent clamping capability * Lo w zener impedance * Fa st response time RATINGS Steady State Power Dissipation at T L = 75 OC lead length, .375" (9.5 mm) (Note 2) Peak Forward Surge Current, 8.3ms single half sine wave- superimmposed o n rated load ( JEDEC METHOD ) (Note 3) Maximum Instantaneous Forward Voltage @25A for unidirectional only SYMBOL PM(AV) IFSM VF TJ, T STG V -55 to + 1 50 0 C UNITS ( Note 5 ) A Peak Power Dissipation at T A = 25 OC,TP = 1mS (Note 1) Minimum 400 1.0 SEE TABLE 1 3.5/6.5 W VAL UE Operating and Storage Temperature Range PPPM W Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load, For capacitive load, derate current by 20%. 2019-01 REV: C NOTES : 4. " ROHS compliant". 0.091 ( 2.31 ) 0.067 ( 1.70 ) 0.012 ( 0.305 ) 0.006 ( 0.152 ) 0.008 ( 0.203 ) 0.004 ( 0.102 ) 0.059 ( 1.50 ) 0.035 ( 0.89 ) 0.209 ( 5.31 ) 0.185 ( 4.70 ) 0.180 ( 4.57 ) 0.160 ( 4.06 ) 0.110 ( 2.79 ) 0.086 ( 2.18 ) 0.067 (1.70 ) 0.051 (1.29 ) 3. Measured on 8.3mS single half Sine-Wave or equivalent wave, duty cycle = 4 pulses per minute maximum. Peak Pulse Current with a 10/1000uS waveform ( Note 1, Fig.3 ) IPPM A 1. No n-repetitive current pulse, per Fig.3 and derated above TA = 25 oC per Fig.2. I2t 6.64 A2/SecTypical Current Squarad Time P4SMAJxx * P/N suffix V means Halogen-free P/N suffix V means AEC-Q101 qualified, e.g:P4SMAJ6.8V
FIG. 1 - PEAK PULSE POWER RATING CURVE PPPM, PEAK PULSE POWER, KW TP, PULSE WIDTH, sec Non-Repetitive Pulse Waveform Shown in Fig.3 T A = 25 100 1.0 0.1 0.1uS 1.0uS 10uS 100uS 1.0mS 10mS FIG. 2 - PULSE DERATING CURVE PEAK PULSE POWER (PPP) OR CURRENT TA, AMBIENT TEMPERATURE,( ) 02 5 5 0 75 100 125 150 175 20 0 100 (IPP) DERATING IN PERCENTAGE,% Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of IPPM 10/1000usec. Waveform as Defined by R.E.A. Peak Value IPPM tr = 10usec. FIG. 3 - PULSE WAVEFORM IPPM, PEAK PULSE CURRENT,% t, TIME,mS 1.0 2.0 3.0 4.0 100 150 HALF VALUE -IPPM Measured at Zero Bias Measured at Devices Stand off Voltage,VWM f = 1.0 MHz Vsig = 50mVp-p TJ = 25 FIG. 4 - TYPICAL JUNCTION CAPACITANCE CJ, CAPACITANCE, pF V(BR), BREAKDOWN VOLTACE, VOLTS 1.0 10 100 20 0 100000 10000 1000 100 copper pad areas RATING AND CHARACTERISTICS CURVES (P4SMAJxx )
IFSM, PEAK FORWARD SURGE FIG. 6 - MAXIMUM NON-REPETITIVE FORWARD NUMBER OF CYCLES AT 60 Hz 1 10 100 8.3ms Single Half Sine-Wave (JEDED Method) TJ = TJ max. SURGE CURRENT UNIDIRECTIONAL CURRENT AMPERES PM(AV), STEADY STATE POWER FIG. 5 - STEADY STATE POWER DERATING CURVE TL, LEAD TEMPERATURE ( ) 1.00 0.75 0.50 0.25 0 25 50 75 100 125 150 175 200 60Hz Resistive or Inductive Load DISSIATION, WATTS TJ = 25 ID, INSTANTANEOUS REVERSE LEAKAGE CHRRENT, MICROAMPERES FIG. 7 -TYPICAL REVERSE LEAKAGE V(BR) BREAKDOWN VOLTAGE, VOLTS 100 0.1 0.01 0 100 200 300 400 600 Measured at Devices Stand-off Voltage, VWM CHARACTERISTICS RATING AND CHARACTERISTICS CURVES (P4SMAJxx )
TRANSIENT VOLTAGE SUPPRESSORS 400W SERIES TVS DIODES / DO-214AC ( CASE 2 ) 400W Rectron Industry No. Breakdown Voltage VBR (Volts) MIN. MAX. @IT (mA) Reverse Stand off Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID(uA) Maximum Peak Pulse Current IPPM (Amps) Maximum Clamping Voltage at IPPM VC (Volts) 53.2 6.12 7.48 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 1000 37 10.8 7.38 9.02 6.63 200 32 12.5 8.19 10.0 7.37 50 29 13.8 10.5 11.6 9.40 5.0 5.0 5.0 5.0 5.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 25.6 15.6 11.4 12.6 10.2 24 16.7 12.4 13.7 11.1 22 18.2 14.4 17.6 12.9 17 23.5 22.8 25.2 20.5 12 33.2 34.2 37.8 30.8 8 49.9 37.1 41.0 33.3 7.4 38.7 47.3 34.8 6.5 40.9 45.2 36.8 6.7 42.3 51.7 38.1 5.9 44.7 49.4 40.2 6.2 45.9 56.1 41.3 5.4 48.5 53.6 43.6 5.7 50.4 61.6 45.4 47.8 5.0 58.8 5.2 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 P4SMAJ6.8 P4SMAJ6.8A P4SMAJ7.5 P4SMAJ7.5A P4SMAJ8.2 P4SMAJ8.2A P4SMAJ9.1 P4SMAJ9.1A P4SMAJ10 P4SMAJ10A P4SMAJ11 P4SMAJ11A P4SMAJ12 P4SMAJ12A P4SMAJ13 P4SMAJ13A P4SMAJ15 P4SMAJ15A P4SMAJ16 P4SMAJ16A P4SMAJ18 P4SMAJ18A P4SMAJ20 P4SMAJ20A P4SMAJ22 P4SMAJ22A P4SMAJ24 P4SMAJ24A P4SMAJ27 P4SMAJ27A P4SMAJ30 P4SMAJ30A P4SMAJ33 P4SMAJ33A P4SMAJ36 P4SMAJ36A P4SMAJ39 P4SMAJ39A P4SMAJ43 P4SMAJ43A P4SMAJ47 P4SMAJ47A P4SMAJ51 P4SMAJ51A P4SMAJ56 P4SMAJ56A Rectron House No. P4FMAJ6.8 P4FMAJ6.8A P4FMAJ7.5 P4FMAJ7.5A P4FMAJ8.2 P4FMAJ8.2A P4FMAJ9.1 P4FMAJ9.1A P4FMAJ10 P4FMAJ10A P4FMAJ11 P4FMAJ11A P4FMAJ12 P4FMAJ12A P4FMAJ13 P4FMAJ13A P4FMAJ15 P4FMAJ15A P4FMAJ16 P4FMAJ16A P4FMAJ18 P4FMAJ18A P4FMAJ20 P4FMAJ20A P4FMAJ22 P4FMAJ22A P4FMAJ24 P4FMAJ24A P4FMAJ27 P4FMAJ27A P4FMAJ30 P4FMAJ30A P4FMAJ33 P4FMAJ33A P4FMAJ36 P4FMAJ36A P4FMAJ39 P4FMAJ39A P4FMAJ43 P4FMAJ43A P4FMAJ47 P4FMAJ47A P4FMAJ51 P4FMAJ51A P4FMAJ56 P4FMAJ56A
TRANSIENT VOLTAGE SUPPRESSORS 400W SERIES TVS DIODES / DO-214AC ( CASE 2 ) 400W Rectron Industry No. Breakdown Voltage VBR (Volts) MIN. MAX. @IT (mA) Reverse Stand off Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID(uA) Maximum Peak Pulse Current IPPM (Amps) Maximum Clamping Voltage at IPPM VC (Volts) P4SMAJ62 P4SMAJ62A P4SMAJ68 P4SMAJ68A P4SMAJ75 P4SMAJ75A P4SMAJ82 P4SMAJ82A P4SMAJ91 P4SMAJ91A P4SMAJ100 P4SMAJ100A P4SMAJ110 P4SMAJ110A P4SMAJ120 P4SMAJ120A P4SMAJ130 P4SMAJ130A P4SMAJ150 P4SMAJ150A P4SMAJ160 P4SMAJ160A P4SMAJ170 P4SMAJ170A P4SMAJ180 P4SMAJ180A P4SMAJ200 P4SMAJ200A P4SMAJ220 P4SMAJ220A P4SMAJ250 P4SMAJ250A P4SMAJ300 P4SMAJ300A P4SMAJ350 P4SMAJ350A P4SMAJ400 P4SMAJ400A 55.8 68.2 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 50.2 5.0 4.7 89.0 81.9 100 73.7 5.0 3.2 131 90.0 110 81.0 5.0 2.1 144 95.0 105 85.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 2.2 137 99.0 121 89.2 1.9 158 105 116 94.0 2.0 152 108 132 97.2 1.7 173 114 126 102 1.8 165 117 143 105 1.6 187 124 137 111 1.7 179 135 165 121 1.4 215 143 158 128 1.4 207 144 176 130 1.3 230 152 168 136 1.4 219 153 187 138 1.2 244 162 179 145 1.3 234 162 198 146 1.2 258 171 189 154 1.2 246 180 220 162 1.0 287 190 210 171 1.1 274 198 242 175 0.9 344 209 231 185 0.9 328 225 275 202 0.83 360 237 263 214 0.87 344 270 330 243 0.70 430 285 315 256 0.73 414 315 385 284 0.60 504 332 368 300 0.62 482 360 440 324 0.53 574 380 420 342 0.55 548 Notes : 1. VBR measured after IT applied for 300ms. IT = square pulse or equivalent. 2. For bidirectional use C or CA suffixs for all types (ex. P4FMAJ6.8C,P4FMAJ400CA) electrical characteristics apply in both directions. 3. For bidirectional types having VWM of 10 volts and less, the ID Iimit is doubled. 4. Mark" " reverse power rating are 300w Rectron House No. P4FMAJ62 P4FMAJ62A P4FMAJ68 P4FMAJ68A P4FMAJ75 P4FMAJ75A P4FMAJ82 P4FMAJ82A P4FMAJ91 P4FMAJ91A P4FMAJ100 P4FMAJ100A P4FMAJ110 P4FMAJ110A P4FMAJ120 P4FMAJ120A P4FMAJ130 P4FMAJ130A P4FMAJ150 P4FMAJ150A P4FMAJ160 P4FMAJ160A P4FMAJ170 P4FMAJ170A P4FMAJ180 P4FMAJ180A P4FMAJ200 P4FMAJ200A P4FMAJ220 P4FMAJ220A P4FMAJ250 P4FMAJ250A P4FMAJ300 P4FMAJ300A P4FMAJ350 P4FMAJ350A P4FMAJ400 P4FMAJ400A
Dimensions in inches and (millimeters) 0.060 MIN. (1.52 MIN.) 0.052 MIN. (1.32 MIN.) 0.220 0.094 MAX. (2.38 MAX.) (5.58) REF
- Internal Circuit C a t h o d e Anode 2. Marking on the body V X X X A P X X X Part No. V oltage Range Cathode Band Plant - code Year - code Week - code : : : : (Y: Last digit of year & A:2010,B:2011…..) WW:01~52 Attachment information about P4SMAJ/ P4F MAJ
PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE GROSS WEIGHT(Kg) EA PER REEL COMPONENT SPACE TAPE SPACE (mm) CARTON SIZE (mm) (mm) EA PER CARTON REEL DIA SMA 7,500 --- --- 330 360*355*360 120,000 15.2-W PACKING CODE (mm) EA PER BOX 15,000 INNER PACKAGE GROSS WEIGHT(Kg) EA PER REEL COMPONENT SPACE TAPE SPACE (mm) CARTON SIZE (mm) (mm) EA PER CARTON REEL DIA PACKING CODE (mm) EA PER BOX 8,000 INNER
Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" paramet- ers which may be included on RECTRON data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rect- ron Inc and its subsidiaries harmless against all claims, damages and expendit- ures. DISCLAIMER NOTICE