P4FMAF82A

P4FMAF RECTRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS P4FMAF SERIES MAXIMUM RATINGS (@ T A =25 O C unless otherwise noted)

FEATURES

• Plastic package has underwriters laboratory * Glass passivated chip construction *4 0 0 watt surage capability at 1ms * Excellent clamping capability * Lo w zener impedance * Fast response time RATINGS Steady State Power Dissipation at T L = 75 O C lead length Peak Forwar d Surge Current, 8.3ms single half sine wave- superimmposed o n rated load ( JEDEC METHOD ) (Note 2) Maximum Instantaneous Forward Voltage @25A for unidirectional only SYMBOL P M(AV) I FSM V F T J , T STG V -55 to + 150 C UNITS ( Note 4 ) A Peak Power Dissipation at T A = 25 O C,T P = 1mS (Note 1) Minimum 400 1.0 SEE TABLE 1 3.5/6. 5 W VAL UE Operatin g and Storage Temperature Range P PPM W Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load, For capacitive load, derate current by 20%. 2017-04 REV: A NOTES : 3. "Fully ROHS compliant", "100% Sn plating (Pb-free)". 2. Measured on 8.3mS single half Sine-Wave or equivalent wave, duty cycle = 4 pulses per minute maximum. Peak Pulse Current with a 10/1000uS waveform ( Note 1, Fig.3 ) I PPM A 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25 o C per Fig.2. I t 6.64 A /SecTypical Current Squarad Time SMAF Dimensions in millimeters and (inches) 4 3. . 0751 431 0. 2.8 2.4 0.110 0.094 60 0.5 940. 0 981. 0 371. 0 0.15 0.11 0.006 0.004 °2±°5 3.1 0.028. 56. 1 52 1. 0.051 0.7 1.1 0.035. 0.043 0.9

RATING AND CHARACTERISTIC CURVES ( P4FMAF6.8 THRU P4FMAF400CA ) FIG. 1 - PEAK PULSE POWER RATING CURVE P MPP WK,REWOPESLUPKAEP, TP, PULSE WIDTH, sec Non-Repetitive Pulse Waveform Shown in Fig.3 T A = 25 100 1.0 0.1 0.1uS 1.0uS 10uS 100uS 1.0mS 10mS FIG. 2 - PULSE DERATING CURVE TNERRUCRO)PPP(REWOPESLUPKAEP TA, AMBIENT TEMPERATURE,( ) 02 5 5 0 75 100 125 150 175 20 0 100 I( PP %,EGATNECREPNIGNITARED) Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of I PPM 10/1000usec. Waveform as Defined by R.E.A. Peak Value IPPM tr = 10usec. FIG. 3 - PULSE WAVEFORM I MPP %,TNERRUCESLUPKAEP, t, TIME,mS 1.0 2.0 3.0 4.0 100 150 HALF VALUE -IPPM Measured at Zero Bias Measured at Devices Stand off Voltage,VWM f = 1.0 MHz Vsig = 50mVp-p T J = 25 FIG. 4 - TYPICAL JUNCTION CAPACITANCE CJ Fp,ECNATICAPAC, V(BR), BREAKDOWN VOLTACE, VOLTS 1.0 10 10 02 0 0 100000 10000 1000 100

I MSF EGRUSDRAWROFKAEP, FIG. 6 - MAXIMUM NON-REPETITIVE FORWARD NUMBER OF CYCLES AT 60 Hz 1 10 100 8.3ms Single Half Sine-Wave (JEDED Method) TJ = TJ max. SURGE CURRENT UNIDIRECTIONAL SEREPMATNERRUC PM REWOPETATSYDAETS,)VA( FIG. 5 - STEADY STATE POWER DERATING CURVE TL, LEAD TEMPERATURE ( ) 1.00 0.75 0.50 0.25 0 25 50 75 100 125 150 175 200 60Hz Resistive or Inductive Load STTAW,NOITAISSID RATING AND CHARACTERISTIC CURVES ( P4FMAF6.8 THRU P4FMAF400CA ) TJ = 25 ID EGAKAELESREVERSUOENATNATSNI, SEREPMAORCIM,TNERRHC FIG. 7 -TYPICAL REVERSE LEAKAGE V(BR) BREAKDOWN VOLTAGE, VOLTS 100 0.1 0.01 0 100 200 300 400 600 Measured at Devices Stand-off Voltage, VWM CHARACTERISTICS

TRANSIENT VOLTAGE SUPPRESSORS 400W SERIES TVS DIODES / SMAF ( CASE 2 ) 400W TYPE Breakdown Voltage VBR (Volts) MIN. MAX. @IT (mA) Reverse Stand off Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID(uA) Maximum Peak Pulse Current IPPM (Amps) Maximum Clamping Voltage at IPPM VC (Volts) 53.2 6.127 . 4 8 1 0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 1000 37 10.8 7.38 9.02 6.63 200 32 12.5 8.19 10.0 7.37 50 29 13.8 10.5 11.6 9.40 5.0 5.0 5.0 5.0 5.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 25.6 15.6 11.4 12.6 10.2 24 16.7 12.4 13.7 11.1 22 18.2 14.4 17.6 12.9 17 23.5 22.8 25.2 20.5 12 33.2 34.2 37.8 30.8 8 49.9 37.1 41.0 33.3 7.4 38.7 47.3 34.8 6.5 40.9 45.2 36.8 6.7 42.3 51.7 38.1 5.9 44.7 49.4 40.2 6.2 45.9 56.1 41.3 5.4 48.5 53.6 43.6 5.7 50.4 61.6 45.4 47.8 5.0 58.8 5.2 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 P4FMAF6.8 P4FMAF6.8A P4FMAF7.5 P4FMAF7.5A P4FMAF8.2 P4FMAF8.2A P4FMAF9.1 P4FMAF9.1A P4FMAF10 P4FMAF10A P4FMAF11 P4FMAF11A P4FMAF12 P4FMAF12A P4FMAF13 P4FMAF13A P4FMAF15 P4FMAF15A P4FMAF16 P4FMAF16A P4FMAF18 P4FMAF18A P4FMAF20 P4FMAF20A P4FMAF22 P4FMAF22A P4FMAF24 P4FMAF24A P4FMAF27 P4FMAF27A P4FMAF30 P4FMAF30A P4FMAF33 P4FMAF33A P4FMAF36 P4FMAF36A P4FMAF39 P4FMAF39A P4FMAF43 P4FMAF43A P4FMAF47 P4FMAF47A P4FMAF51 P4FMAF51A P4FMAF56 P4FMAF56A

TRANSIENT VOLTAGE SUPPRESSORS 400W SERIES TVS DIODES / SMAF ( CASE 2 ) 400W TYPE Breakdown Voltage VBR (Volts) MIN. MAX. @IT (mA) Reverse Stand off Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID(uA) Maximum Peak Pulse Current IPPM (Amps) Maximum Clamping Voltage at IPPM VC (Volts) P4FMAF62 P4FMAF62A P4FMAF68 P4FMAF68A P4FMAF75 P4FMAF75A P4FMAF82 P4FMAF82A P4FMAF91 P4FMAF91A P4FMAF100 P4FMAF100A P4FMAF110 P4FMAF110A P4FMAF120 P4FMAF120A P4FMAF130 P4FMAF130A P4FMAF150 P4FMAF150A P4FMAF160 P4FMAF160A P4FMAF170 P4FMAF170A P4FMAF180 P4FMAF180A P4FMAF200 P4FMAF200A P4FMAF220 P4FMAF220A P4FMAF250 P4FMAF250A P4FMAF300 P4FMAF300A P4FMAF350 P4FMAF350A P4FMAF400 P4FMAF400A 55.8 68.2 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 50.2 5.0 4.7 89.0 81.9 100 73.7 5.0 3.2 131 90.0 110 81.0 5.0 2.1 144 95.0 105 85.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 1.0 1.0 5.0 5.0 2.2 137 99.0 121 89.2 1.9 158 105 116 94.0 2.0 152 108 132 97.2 1.7 173 114 126 102 1.8 165 117 143 105 1.6 187 124 137 111 1.7 179 135 165 121 1.4 215 143 158 128 1.4 207 144 176 130 1.3 230 152 168 136 1.4 219 153 187 138 1.2 244 162 179 145 1.3 234 162 198 146 1.2 258 171 189 154 1.2 246 180 220 162 1.0 287 190 210 171 1.1 274 198 242 175 0.9 344 209 231 185 0.9 328 225 275 202 0.83 360 237 263 214 0.87 344 270 330 243 0.70 430 285 315 256 0.73 414 315 385 284 0.60 504 332 368 300 0.62 482 360 440 324 0.53 574 380 420 342 0.55 548 Notes : 1. VBR measured after IT applied for 300ms. IT = square pulse or equivalent. 2. For bidirectional use C or CA suffixs for all types (ex. P4FMAF6.8C,P4FMAF400CA) electrical characteristics apply in both directions. 3. For bidirectional types having VWM of 10 volts and less, the ID Iimit is doubled. 4. Mark" " reverse power rating are 300w

Dimensions in inches and (millimeters) 0.060 MIN. (1.52 MIN.) 0.052 MIN. (1.32 MIN.) 0.220 0.094 MAX. (2.38 MAX.) (5.58) REF

Attachment information about P4FMAFXXX 1. Internal Circuit Cathode Anode 2. Marking on the body V X X X A P X X X Part No. V oltage Range Cathode Band Plant - code Year - code Week - code : : : : 1). P4FMAFXX/P4FMAFXXA 2). P4FMAFXXCA V X X X A P X X XCA Part No. V oltage Range Plant - code Year - code Week - code ⧊WW:01~52⧋ ⧊WW:01~52⧋ (Y:Last digit of year & A:2010,B:2011...) (Y:Last digit of year & A:2010,B:2011...)

PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE GROSS WEIGHT(Kg) EA PER REEL COMPONENT SPACE TAPE SPACE (mm) CARTON SIZE (mm) (mm) EA PER CARTON REEL DIA SMAF SMAF 3,000 10,000 --- --- --- --- 330 178 390*205*310 360*355*360 96,000 160,000 --- --- PACKING CODE (mm) EA PER BOX 12,000 20,000 INNER

Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" paramet- ers which may be included on RECTRON data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rect- ron Inc and its subsidiaries harmless against all claims, damages and expendit- ures. DISCLAIMER NOTICE