P0642SC SOCAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Thyristor Surge Suppressors (TSS) Revision September 25, 2013 1 / 5 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. P0642SC – P6002SC Series - DO-214AA(SMB) @10/700 μS , 6KV SOCAY Electronics Co., Ltd. www.socay.com P0642SC-P6002SC Series are very low capacitance devices designed to protect broadband equipment such as VoIP, DSL modems and DSLAMs from damaging over-voltage transients. This series provides a surface mount solution that enables equipment to comply with global regulatory standards, while limiting the impact to broadband signals. u Low voltage overshoot u Low on-state voltage u Does not degrade with use u Fails short circuit when surged in excess of ratings u Low distortion u 40% lower capacitance than comparable product u TIA-968-A u ITU K.20/21 Enhanced level u ITU K.20/21 Basic Level u GR 1089 Inter building u IEC 6100-4-5 u YD/T 1082 u YD/T 993 u YD/T 950 Parameter Definition IS Switching Current - maximum current required to switch to on state IDRM Leakage Current - maximum peak off-state current measured at VDRM IH Holding Current - minimum current required to maintain on state IT On-state Current - maximum rated continuous on-state current VS Switching Voltage - maximum voltage prior to switching to on stat VDRM Peak Off-state Voltage - maximum voltage that can be applied while maintaining off state VT On-state Voltage - maximum voltage measured at rated on-state current C0 Off-state Capacitance - typical capacitance measured in off state IT IS IH IDRM VT V DRM VS -V +V
Description
Applicable Global Standards Schematic Symbol Electrical Parameters
Thyristor Surge Suppressors (TSS) Revision September 25, 2013 2 / 5 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. P0642SC – P6002SC Series - DO-214AA(SMB) @10/700 μS , 6KV SOCAY Electronics Co., Ltd. www.socay.com VDRM @IDRM=5μA VS @100V/μS VT @IT=2.2A IS IT IH C0 @1MHz Part Number Marking V min V max V max mA max A max mA min pF min pF max P0642SC P06C 58 77 4 800 2.2 120 25 45 P0722SC P07C 65 88 4 800 2.2 120 20 45 P0902SC P09C 75 98 4 800 2.2 120 20 40 P1102SC P11C 90 130 4 800 2.2 120 15 35 P1302SC P13C 120 160 4 800 2.2 120 15 35 P1502SC P15C 140 180 4 800 2.2 120 15 30 P1802SC P18C 170 220 4 800 2.2 120 10 30 P2302SC P23C 190 260 4 800 2.2 120 10 25 P2602SC P26C 220 300 4 800 2.2 120 10 25 P3002SC P30C 280 360 4 800 2.2 120 10 25 P3502SC P35C 320 400 4 800 2.2 120 10 20 P4202SC P42C 380 500 4 800 2.2 120 10 20 P4802SC P48C 440 600 4 800 2.2 120 5 20 P6002SC P60C 550 700 4 800 2.2 120 5 20 Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are bi-directional. 2/10μS1 8/20μS1 10/160μS1 10/560μS1 10/1000μS1 5/310μS1 2/10μS2 1.2/50μS2 10/160μS2 10/560μS2 10/1000μS2 10/700μS2 ITSM 50/60 Hz di/dt Series A min A min A min A min A min A min A min Amps/µs max C 500 400 200 150 100 150 50 500 Notes: 1. Current waveform in µs 2. Voltage waveform in µs - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP ratings applicable over temperature range of -40ºC to +85ºC - The device must initially be in thermal equilibrium with -40°C < TJ < +150°C Package Symbol Parameter Value Unit TJ Operating Junction Temperature Range - 40 to + 150 °C TS Storage Temperature Range - 40 to +150 °C RθJA Thermal Resistance: Junction to Ambient 90 °C/W
Electrical Characteristics
Thyristor Surge Suppressors (TSS) Revision September 25, 2013 4 / 5 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. P0642SC – P6002SC Series - DO-214AA(SMB) @10/700 μS , 6KV SOCAY Electronics Co., Ltd. www.socay.com Lead Material Copper Alloy High Temp Voltage Blocking 80% Rated VDRM (VAC Peak ) +125 °C or +150 °C, Lead Material Copper Alloy High Temp Voltage Blocking 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 Terminal Finish 100% Matte-Tin Plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Temp Cycling -65°C to +150°C, 15 min. dwell, 10 up to 100 cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & Humidity 52 VDC (+85°C) 85%RH, 504 up to 1008 hrs. EIA/ JEDEC, JESD22-A-101 High Temp Storage +150°C 1008 hrs. MIL-STD-750 (Method 1031) JEDEC, JESD22-A-101 Low Temp Storage -65°C, 1008 hrs. Thermal Shock 0°C to +100 °C, 5 min. dwell, 10 sec. transfer, Thermal Shock 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker Test) +121°C, 100%RH, 2atm, 24 up to 168 hrs. EIA/Cooker Test) JEDEC, JESD22-A-102 Resistance to Solder Heat +260°C, 30 secs. MIL-STD-750 (Method 2031 Moisture Sensitivity Level 85%RH, +85 °C, 168 hrs., 3 reflow cycles Level (+260°C Peak). JEDEC-J-STD-020, Level 1 Reflow Condition Lead–free assembly -Temperature Min (Ts(min)) +150°C -Temperature Max (Ts(max)) +200°C Pre Heat -Time (min to max) (ts) 60 -180 Seconds Average ramp up rate ( Liquidus Temp T L) to peak 3°C/Second Max TS(max) to TL - Ramp-up Rate 3°C/Second Max - Temperature (TL) (Liquidus) +217°C Reflow - Time (min to max) (ts) 60 -150 Seconds Peak Temperature (TP) 260 +0/-5°C Time within 5°C of actual peak Temperature (tp) 30 Seconds Max Ramp-down Rate 6°C/Second Max Time 25°C to peak Temperature (TP) 8 minutes Max Do not exceed +260°C Ramp-down Preheat Critical Zone TL to TP Time to peak temperature (t 25℃ to peak) TP TL TS(max) TS(min) Temperature Ramp-up Time Environmental Specifications Physical Specifications Soldering Parameters
Thyristor Surge Suppressors (TSS) Revision September 25, 2013 5 / 5 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. P0642SC – P6002SC Series - DO-214AA(SMB) @10/700 μS , 6KV SOCAY Electronics Co., Ltd. www.socay.com Inches Millimeters Dimensions Min Max Min Max A 0.130 0.156 3.30 3.95 B 0.201 0.220 5.10 5.60 C 0.077 0.087 1.95 2.20 D 0.159 0.181 4.05 4.60 E 0.030 0.063 0.76 1.60 F 0.076 0.096 1.90 2.45 G 0.002 0.008 0.05 0.20 H 0.077 0.104 1.95 2.65 K 0.006 0.016 0.15 0.41 Part Number Component Package Quantity Packaging Option Packaging Specification Pxxx2SC DO-214AA 2500 Tape & Reel -12mm/13″tape EIA -481 - D Part Numbering Part Marking Inch (millimeter) Pad outline Dimensions DO -214AA Packaging Date code Part Marking Code (Refer to Electrical Characteristics Table) Dimensions are in inches (and millimeters) Direction of Feed 0.49 (12.4) 0.512(13.0) Arbor Hole Diameter 12.99 (330.0) 0.36 (9.2) 0.157 (4.0) 0.059 (1.5) Diameter 0.315 (8.0) Cover tape 0.472 (12.0) Tape and Reel Specifications