P4000EB

P0080EB SOCAY | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Thyristor Surge Suppressors (TSS) Revision September 25, 2013 1 / 5 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. P0080EB - P5000EB Series - TO-92 @10/700 μS , 4KV SOCAY Electronics Co., Ltd. www.socay.com P0080EB - P5000EB Series are designed to protect broadband equipment such as modems, line card, CPE and DSL from damaging over-voltage transients. The series provides a surface mount solution that enables equipment to comply with global regulatory standards. u Low voltage overshoot u Low on-state voltage u Does not degrade surge capability after multiple surge events within limit u Fails short circuit when surged in excess of ratings u Low Capacitance u TIA-968-A / TIA-968-B u ITU K.20/21 Enhanced level u ITU K.20/21 Basic Level u GR 1089 Inter building u GR 1089 Inter building u IEC 6100-4-5 u YD/T 1082 u YD/T 993 u YD/T 950 Parameter Definition IS Switching Current - maximum current required to switch to on state IDRM Leakage Current - maximum peak off-state current measured at VDRM IH Holding Current - minimum current required to maintain on state IT On-state Current - maximum rated continuous on-state current VS Switching Voltage - maximum voltage prior to switching to on stat VDRM Peak Off-state Voltage - maximum voltage that can be applied while maintaining off state VT On-state Voltage - maximum voltage measured at rated on-state current C0 Off-state Capacitance - typical capacitance measured in off state IT IS IH IDRM VT V DRM VS -V +V PIN1 PIN3

Description

Applicable Global Standards Electrical Parameters Pinout Designation Schematic Symbol

Thyristor Surge Suppressors (TSS) Revision September 25, 2013 2 / 5 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. P0080EB - P5000EB Series - TO-92 @10/700 μS , 4KV SOCAY Electronics Co., Ltd. www.socay.com VDRM @IDRM=5μA VS @100V/μS VT @IT=2.2A IS IT IH C0 @1MHz Part Number Marking V min V max V max mA max A max mA min pF min pF max P0080EB P0080EB 6 25 4 800 2.2 50 25 150 P0300EB P0300EB 25 40 4 800 2.2 50 15 140 P0640EB P0640EB 58 77 4 800 2.2 150 40 60 P0720EB P0720EB 65 88 4 800 2.2 150 35 60 P0900EB P0900EB 75 98 4 800 2.2 150 25 55 P1100EB P1100EB 90 130 4 800 2.2 150 30 50 P1300EB P1300EB 120 160 4 800 2.2 150 25 45 P1500EB P1500EB 140 180 4 800 2.2 150 25 40 P1800EB P1800EB 170 220 4 800 2.2 150 25 35 P2000EB P2000EB 180 220 4 800 2.2 150 20 35 P2300EB P2300EB 190 260 4 800 2.2 150 25 35 P2600EB P2600EB 220 300 4 800 2.2 150 20 35 P3100EB P3100EB 275 350 4 800 2.2 150 20 35 P3500EB P3500EB 320 400 4 800 2.2 150 20 35 P4000EB P4000EB 360 460 4 800 2.2 150 20 35 P4500EB P4500EB 400 540 4 800 2.2 150 20 35 P5000EB P5000EB 440 600 4 800 2.2 150 20 35 Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are bi-directional. 2/10μS1 8/20μS1 10/160μS1 10/560μS1 10/1000μS1 5/310μS1 2/10μS2 1.2/50μS2 10/160μS2 10/560μS2 10/1000μS2 10/700μS2 ITSM 50/60 Hz di/dt Series A min A min A min A min A min A min A min Amps/µs max B 250 250 150 100 80 100 30 500 Notes: 1. Current waveform in µs 2. Voltage waveform in µs - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP ratings applicable over temperature range of -40ºC to +85ºC - The device must initially be in thermal equilibrium with -40°C < TJ < +150°C Package Symbol Parameter Value Unit TJ Operating Junction Temperature Range - 40 to + 150 °C TS Storage Temperature Range - 40 to +150 °C RθJA Thermal Resistance: Junction to Ambient 90 °C/W

Electrical Characteristics

Thyristor Surge Suppressors (TSS) Revision September 25, 2013 4 / 5 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. P0080EB - P5000EB Series - TO-92 @10/700 μS , 4KV SOCAY Electronics Co., Ltd. www.socay.com Lead Material Copper Alloy High Temp Voltage Blocking 80% Rated VDRM (VAC Peak ) +125 °C or +150 °C, Lead Material Copper Alloy High Temp Voltage Blocking 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 Terminal Finish 100% Matte-Tin Plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Temp Cycling -65°C to +150°C, 15 min. dwell, 10 up to 100 cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & Humidity 52 VDC (+85°C) 85%RH, 504 up to 1008 hrs. EIA/ JEDEC, JESD22-A-101 High Temp Storage +150°C 1008 hrs. MIL-STD-750 (Method 1031) JEDEC, JESD22-A-101 Low Temp Storage -65°C, 1008 hrs. Thermal Shock 0°C to +100 °C, 5 min. dwell, 10 sec. transfer, Thermal Shock 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker Test) +121°C, 100%RH, 2atm, 24 up to 168 hrs. EIA/Cooker Test) JEDEC, JESD22-A-102 Resistance to Solder Heat +260°C, 30 secs. MIL-STD-750 (Method 2031 Moisture Sensitivity Level 85%RH, +85 °C, 168 hrs., 3 reflow cycles Level (+260°C Peak). JEDEC-J-STD-020, Level 1 Reflow Condition Lead–free assembly -Temperature Min (Ts(min)) +150°C -Temperature Max (Ts(max)) +200°C Pre Heat -Time (min to max) (ts) 60 -180 Seconds Average ramp up rate ( Liquidus Temp T L) to peak 3°C/Second Max TS(max) to TL - Ramp-up Rate 3°C/Second Max - Temperature (TL) (Liquidus) +217°C Reflow - Time (min to max) (ts) 60 -150 Seconds Peak Temperature (TP) 260 +0/-5°C Time within 5°C of actual peak Temperature (tp) 30 Seconds Max Ramp-down Rate 6°C/Second Max Time 25°C to peak Temperature (TP) 8 minutes Max Do not exceed +260°C Ramp-down Preheat Critical Zone TL to TP Time to peak temperature (t 25℃ to peak) TP TL TS(max) TS(min) Temperature Ramp-up Time Soldering Parameters Environmental Specifications Physical Specifications

Thyristor Surge Suppressors (TSS) Revision September 25, 2013 5 / 5 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. P0080EB - P5000EB Series - TO-92 @10/700 μS , 4KV SOCAY Electronics Co., Ltd. www.socay.com Inches Millimeters Dimensions Min Max Min Max A 0.176 0.196 4.47 4.98 B 0.500 12.70 D 0.095 0.105 2.41 2.67 E 0.150 3.81 G 0.135 0.145 3.43 3.68 H 0.088 0.096 2.23 2.44 J 0.176 0.186 4.47 4.73 K 0.088 0.096 2.23 2.44 L 0.013 0.019 0.33 0.48 M 0.013 0.017 0.33 0.43 N 0.060 1.52 The TO-92 is designed to meet mechanical standards as set forth in JEDEC publication number 95. All leads are insulated from case. Case is electrically non-conductive. (Rated at 1600 V(AC) RMS for one minute from leads to case over the operating temperature range.) Mold flash shall not exceed 0.13 mm per side. Part Number Description Quantity Pxxx0EB TO-92 Bulk Pack 1000 Part Numbering Part Marking MT1/PIN1 MT2/PIN3 Dimensions TO-92 Packaging Date code Part Marking Code (Refer to Electrical Characteristics Table) PXXXXE B