DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
© Semiconductor Components Industries, LLC, 2011 April, 2011 − Rev. 0
1 Publication Order Number:
P3P8220A/AH is a versatile, 1.8V/2.5V/3.3V Peak EMI reduction IC. P3P8220A accepts an input clock from an external reference and delivers a 1x modulated clock output. P3P8220A is a Low drive part and P3P8220AH is a High drive part. Refer to DC/AC Electrical characteristic table. P3P8220A/AH operates with 1.8V/2.5V/3.3V supply and is available in an 8 Pin, WDFN (2 mm x 2 mm) Package. General Features
- 1x, LVCMOS Peak EMI Reduction
- Supports Non−continuous Input Clock Applications
- Input / Output Frequency Range: Up to 60 MHz
- Low and High Drive Part
- Supply V oltage: 1.8 V ±0.1 V 2.5 V±0.2 V 3.3 V±0.3 V
- 8−Pin, WDFN(2 mm x 2 mm) Package
- These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant Application
- P3P8220A is Targeted Towards Consumer Electronic Applications
Figure 1. Block Diagram dimensions section on page 6 of this data sheet.
ORDERING INFORMATION
Table 1. PIN DESCRIPTION
1 CLKIN I External reference Clock Input
2 NC No connection
3 NC No connection
4 GND P Ground
5 ModOUT O Buffered Modulated Clock output.
6 NC No connection
7 NC No connection
Table 2. OPERATING CONDITIONS Table 3. ABSOLUTE MAXIMUM RATING periods of time may affect device reliability.
Table 4. ELECTRICAL CHARACTERISTICS
60 MHz 12
Table 5. SWITCHING CHARACTERISTICS
60 MHz ±200
60 MHz ±150
- Parameter is guaranteed by design and characterization. Not 100% tested in production.
- All parameters are specified with 15 pF loaded outputs.
- For an input Duty Cycle (typ) of 50%.
http://onsemi.com Ordering Code Marking Temperature Package Type Shipping† P3P8220AG−08CR GH 0°C to +70°C 8−pin (2 mm x 2 mm) WDFN (Pb−Free) Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *A “microdot” placed at the end of last row of marking or just below the last row toward the center of package indicates Pb−Free.
http://onsemi.com PACKAGE DIMENSIONS WDFN8 2x2, 0.5P CASE 511AQ−01 ISSUE A ÍÍÍ ÍÍÍ ÍÍÍ NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.15 AND 0.30mm FROM TERMINAL. C A SEATING PLANE D E 0.10 C A 0.10 C DIM A MIN MILLIMETERS 0.70 A1 0.00 A3 0.20 REF b 0.20 D 2.00 BSC E 2.00 BSC e 0.50 BSC PIN ONE REFERENCE 0.05 C 0.05 C A0.10 C NOTE 3 L e b B 0.05 C 0.50L *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. SOLDERING FOOTPRINT* 2.30 0.50 0.78 DIMENSIONS: MILLIMETERS BOTTOM VIEW
0.35 PITCH
0.80 0.05 0.30 0.60 MAX DETAIL A L OPTIONAL CONSTRUCTIONS L ÉÉÉÉ ÉÉ DETAIL B MOLD CMPDEXPOSED Cu OPTIONAL CONSTRUCTION ---L1 0.15 B TOP VIEW SIDE VIEW e/2 PACKAGE OUTLINE DETAIL B DETAIL A RECOMMENDED 0.88 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 P3P8220A/D LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative