STD3NK60ZT4 STMICROELECTRONICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 34
Technical content
Datasheet sections
- 1 Electrical ratings
- 2 Electrical characteristics
- 2.1 Electrical characteristics curves
- 3 Test circuits
- 4 Package information
- 4.1 D²PAK (TO-263) type A package information
- 4.2 D²PAK packing information
- 4.3 IPAK (TO-251) type A package information
- 4.4 IPAK (TO-251) type C package information
- 4.5 DPAK (TO-252) type A package information
- 4.6 DPAK (TO-252) type C package information
- 4.7 DPAK (TO-252) type E package information
- 4.8 DPAK (TO-252) packing information
- 4.9 TO-220 type A package information
- 4.10 TO-220FP package information
- 5 Ordering information
Features
Order codes VDS RDS(on) max. ID Package STB3NK60ZT4 600 V 3.6 Ω 2.4 A D2PAK STD3NK60Z-1 IPAK STD3NK60ZT4 DPAK STP3NK60Z TO-220 STP3NK60ZFP TO-220FP
- Extremely high dv/dt capability
- 100% avalanche tested
- Gate charge minimized
- Very low intrinsic capacitance
- Zener-protected
Applications
- Switching applications
Description
These high-voltage devices are Zener-protected N-channel Power MOSFETs developed using the SuperMESH™ technology by STMicroelectronics, an optimization of the well-established PowerMESH™. In addition to a significant reduction in on-resistance, these devices are designed to ensure a high level of dv/dt capability for the most demanding applications. Product status link STB3NK60ZT4 STD3NK60Z-1 STD3NK60ZT4 STP3NK60Z STP3NK60ZFP N-channel 600 V, 3.2 Ω typ., 2.4 A SuperMESH™ Power MOSFETs in D²PAK, IPAK, DPAK, TO-220 and TO-220FP packages STB3NK60ZT4, STD3NK60Z-1, STD3NK60ZT4 STP3NK60Z, STP3NK60ZFP Datasheet DS2912 - Rev 6 - August 2018 For further information contact your local STMicroelectronics sales office.
1 Electrical ratings
Table 1. Absolute maximum ratings
- Limited by maximum junction temperature.
- Pulse width limited by safe operating area.
Table 2. Thermal data
- When mounted on an 1-inch² FR-4, 2oz Cu board.
Table 3. Avalanche characteristics
2 Electrical characteristics
(TCASE = 25 °C unless otherwise specified) Table 4. On/off states
- Defined by design, not subject to production test.
Table 5. Dynamic
- C oss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0
Table 6. Switching times
Electrical characteristics
Table 7. Source drain diode
- Pulse width limited by safe operating area.
- Pulsed: pulse duration = 300 μs, duty cycle 1.5%.
Table 8. Gate-source Zener diode The built-in back-to-back Zener diodes are specifically designed to enhance the ESD performance of the device. additional external componentry.
2.1 Electrical characteristics curves
Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP Figure 5. Output characterisics Figure 6. Transfer characteristics
Figure 13. Normalized V(BR)DSS vs temperature Figure 14. Maximum avalanche energy vs temperature
3 Test circuits
Figure 15. Test circuit for resistive load switching times Figure 16. Test circuit for gate charge behavior Figure 17. Test circuit for inductive load switching and Figure 18. Unclamped inductive load test circuit Figure 19. Unclamped inductive waveform Figure 20. Switching time waveform
4 Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
Package information
4.1 D²PAK (TO-263) type A package information
Figure 21. D²PAK (TO-263) type A package outline
Table 9. D²PAK (TO-263) type A package mechanical data
Figure 22. D²PAK (TO-263) recommended footprint (dimensions are in mm)
4.2 D²PAK packing information
Figure 23. D²PAK tape outline
Figure 24. D²PAK reel outline Table 10. D²PAK tape and reel mechanical data
4.3 IPAK (TO-251) type A package information
Figure 25. IPAK (TO-251) type A package outline
Table 11. IPAK (TO-251) type A package mechanical data
4.4 IPAK (TO-251) type C package information
Figure 26. IPAK (TO-251) type C package outline
Table 12. IPAK (TO-251) type C package mechanical data
4.5 DPAK (TO-252) type A package information
Figure 27. DPAK (TO-252) type A package outline
Table 13. DPAK (TO-252) type A mechanical data
4.6 DPAK (TO-252) type C package information
Figure 28. DPAK (TO-252) type C package outline
Table 14. DPAK (TO-252) type C mechanical data
4.7 DPAK (TO-252) type E package information
Figure 29. DPAK (TO-252) type E package outline
Table 15. DPAK (TO-252) type E mechanical data Figure 30. DPAK (TO-252) recommended footprint (dimensions are in mm)
4.8 DPAK (TO-252) packing information
Figure 31. DPAK (TO-252) tape outline
Figure 32. DPAK (TO-252) reel outline Table 16. DPAK (TO-252) tape and reel mechanical data
4.9 TO-220 type A package information
Figure 33. TO-220 type A package outline
Table 17. TO-220 type A package mechanical data
4.10 TO-220FP package information
Figure 34. TO-220FP package outline
Table 18. TO-220FP package mechanical data
5 Ordering information
Table 19. Order codes
Ordering information
Revision history
Table 20. Document revision history 07-Jul-2003 5 Updated document.