P3002SBLRP

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

SIDACtor® Protection Thyristors Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Broadband Optimized™ Protection TwinChip™ Series - DO-214 TwinChip™ Series DO-214 are very low capacitance SIDACtor® devices designed to protect broadband equipment such as VoIP , DSL modems and DSLAMs from damaging overvoltage transients. This series provides a surface mount solution that enables equipment to comply with global regulatory standards, while limiting the impact to broadband signals.

Electrical Characteristics

Description

t ITU K.20/21 t IEC 61000-4-5 t GR 1089 Intra-building t YD/T 1082 t YD/T 993 t YD/T 950 Applicable Global Standards Features and Benefits t Low voltage overshoot t Low on-state voltage t Does not degrade with use t Low distortion t Fails short circuit when surged in excess of ratings t 40% lower capacitance than comparable product Agency Approvals Agency Agency File Number E133083 Schematic Symbol Pinout Designation Part Number Marking VDRM @lDRM=5μA VS @100V/μs IH IS IT VT @IT =2.2 Amps Capacitance @1MHz, 2V bias V min V max mA min mA max A max V max pF min pF max P0642SALRP P062A 58 77 120 800 2.2 8 25 45 P0722SALRP P072A 65 88 120 800 2.2 8 20 45 P0902SALRP P092A 75 98 120 800 2.2 8 20 40 P1102SALRP P112A 90 130 120 800 2.2 8 15 35 P1302SALRP P132A 120 160 120 800 2.2 8 15 35 P1502SALRP P152A 140 180 120 800 2.2 8 15 30 P1802SALRP P182A 170 220 120 800 2.2 8 10 30 P2302SALRP P232A 190 260 120 800 2.2 8 10 25 P2602SALRP P262A 220 300 120 800 2.2 8 10 25 P3002SALRP P302A 280 360 120 800 2.2 8 10 25 P3502SALRP P352A 320 400 120 800 2.2 8 10 20 P4202SALRP P422A 380 500 120 800 2.2 8 10 20 P4802SALRP P482A 440 600 120 800 2.2 8 5 20 P6002SALRP P602A 550 700 120 800 2.2 8 5 20 NOT APPLICABLE T able continues on next page.

SIDACtor® Protection Thyristors Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Broadband Optimized™ Protection Surge RatingsSeries IPP ITSM 50/60 Hz di/dt0.2x310 1 0.5x700 2 2x10 1 2x10 2 8x20 1 1.2x50 2 10x160 1 10x160 2 10x560 1 10x560 2 5x320 1 9x720 2 10x360 1 10x360 2 10x1000 1 10x1000 2 5x310 1 10x700 2 A min A min A min A min A min A min A min A min A min A min A/μs A 2 01 5 0 1 5 09 0 5 07 57 5 4 5 7 52 0 5 0 0 B 25 250 250 150 100 100 125 80 100 25 500 C 50 500 400 200 150 200 175 100 200 30 500 Part Number Marking VDRM @lDRM=5μA VS @100V/μs IH IS IT VT @IT =2.2 A Capacitance @1MHz, 2V bias V min V max mA min mA max A max V max pF min pF max P0642SBLRP P062B 58 77 120 800 2.2 8 25 45 P0722SBLRP P072B 65 88 120 800 2.2 8 20 45 P0902SBLRP P092B 75 98 120 800 2.2 8 20 40 P1102SBLRP P112B 90 130 120 800 2.2 8 15 35 P1302SBLRP P132B 120 160 120 800 2.2 8 15 35 P1502SBLRP P152B 140 180 120 800 2.2 8 15 30 P1802SBLRP P182B 170 220 120 800 2.2 8 10 30 P2302SBLRP P232B 190 260 120 800 2.2 8 10 25 P2602SBLRP P262B 220 300 120 800 2.2 8 10 25 P3002SBLRP P302B 280 360 120 800 2.2 8 10 25 P3502SBLRP P352B 320 400 120 800 2.2 8 10 20 P4202SBLRP P422B 380 500 120 800 2.2 8 10 20 P4802SBLRP P482B 440 600 120 800 2.2 8 5 20 P6002SBLRP P602B 550 700 120 800 2.2 8 5 20 P3002SCLRP P302C 280 360 120 800 2.2 8 20 35 P3502SCLRP P352C 320 400 120 800 2.2 8 20 30 P4202SCLRP P422C 380 500 120 800 2.2 8 15 30 P4802SCLRP P482C 440 600 120 800 2.2 8 15 30 P6002SCLRP P602C 550 700 120 800 2.2 8 10 25 Electrical Characteristics (continued) Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are bi-directional (unless otherwise noted). Notes:

1 Current waveform in μs

2 Voltage waveform in μs

• Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP - The device must initially be in thermal equilibrium with -40°C < TJ <

SIDACtor® Protection Thyristors Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Broadband Optimized™ Protection IH IT IS IDRM VDRMVT +V-V VS 100 tr td Peak Value Half Value t – Time (μs) IPP – Peak Pulse Current – %I PP tr = rise time to peak value td = decay time to half value Waveform = t r x td V-I Characteristics tr x td Pulse Waveform -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C Percent of VS Change – % 25 °C 25°C Case Temperature (TC) - ºC 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 Ratio of IH IH (TC = 25ºC) Normalized VS Change vs. Junction T emperature Normalized DC Holding Current vs. Case T emperature Package Symbol Parameter Value Unit DO-214AA TJ Operating Junction Temperature Range UP TS Storage Temperature Range UP R0JA Thermal Resistance: Junction to Ambient 90 °C/W Thermal Considerations

SIDACtor® Protection Thyristors Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Broadband Optimized™ Protection Physical Specifications Lead Material Copper Alloy T erminal Finish 100% Matte-Tin Plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Environmental Specifications High T emp Voltage Blocking 80% Rated VDRM (VAC Peak ¡$PS 504 or 1008 hrs. MIL -STD-750 (Method 1040) JEDEC, JESD22-A-101 T emp Cycling ¡$UP NJOEXFMM VQUP cycles. MIL -STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased T emp & Humidity 52 V DC VQUPIST&*" JEDEC, JESD22-A-101 High T emp Storage ¡$IST.*-45% .FUIPE JEDEC, JESD22-A-101 Low T emp Storage -65°C, 1008 hrs. Thermal Shock ¡$UP NJOEXFMM TFDUSBOTGFS 10 cycles. MIL -STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker T est) BUN VQUPIST&*" JEDEC, JESD22-A-102 Resistance to Solder Heat TFDT.*-45% .FUIPE Moisture Sensitivity Level IST SFnPXDZDMFT ¡$1FBL +&%&$+45% -FWFM Part Marking Pxxxx Date Code Part Marking Code (Refer to Electrical Characteristics Table) xxxxx Soldering Parameters Reflow Condition Pb-Free assembly (see Fig. 1) Pre Heat - Temperature Min (Ts(min)) - Temperature Max (Ts(max)) - Time (Min to Max) (ts) 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) - Temperature (tL) 60-150 secs. Peak Temp (TP) Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed Time T emperature TP TL TS(max) TS(min) tP tL tS time to peak temperature (t 25ºC to peak) Ramp-down Ramp-up Preheat Critical Zone TL to TP Figure 1

SIDACtor® Protection Thyristors Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Broadband Optimized™ Protection Packing Options T ape and Reel Specification — DO-214AA Package Type Description Quantity Added Suffix Industry Standard S DO-214AA Tape & Reel 2500 RP EIA-481-D 0.472 (12.0) 0.36 (9.2) 0.315 (8.0) 0.157 (4.0) 0.49 (12.4) 0.512 (13.0) Arbor Hole Dia. 12.99 (330.0) Dimensions are in inches (and millimeters). Direction of Feed 0.059 DIA(1.5) Cover tape Dimensions — DO-214AA 0.079 (2.0) 0.1 10 (2.8) 0.079 (2.0) Pad Outline H K E F G AC B D Case Temperature Measurement Point inch (millimeter) Dimensions Inches Millimeters Min Max Min Max A 0.130 0.156 3.30 3.95 B 0.201 0.220 5.10 5.60 C 0.077 0.087 1 .95 2.20 D 0.159 0.181 4.05 4.60 E 0.030 0.063 0.75 1 .60 F 0.075 0.096 1 .90 2.45 G 0.002 0.008 0.05 0.20 H 0.077 0.104 1 .95 2.65 K 0.006 0.016 0.15 0.41 Part Numbering CONSTRUCTION VARIABLE REEL PACK IPP RATING RoHS COMPLIANT TYPE SIDACtor P x LR P MEDIAN VOLTAGE PACKAGE TYPE xxx 2S