P30/19-3C91

P30 FERROXCUBE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

Supersedes data of September 2004 2008 Sep 01 FERROXCUBE P30/19 P cores and accessories

2008 Sep 01 1008

P cores and accessories P30/19 CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.330 mm −1 Ve effective volume 6190 mm 3 Ie effective length 45.2 mm Ae effective area 137 mm 2 Amin minimum area 116 mm 2 m mass of set ≈ 34 g CBW427 4.3 ±0.613.5 0 −0.4 25 +0.8 ±0.5 20.5 ±0.5 ∅5.4 +0.2 13 +0.4 18.8 ±0.2 0.5 +0.2 Fig.1 P30/19 core set. Dimensions in mm. Core sets for general purpose transformers and power applications Clamping force for AL measurements, 250 ±50 N. GRADE AL (nH) µe TOTAL AIR GAP (µm) TYPE NUMBER 3C81 250 ±3% ≈ 66 ≈ 840 P30/19-3C81-E250 315 ±3% ≈ 83 ≈ 640 P30/19-3C81-A315 400 ±3% ≈ 105 ≈ 480 P30/19-3C81-A400 630 ±3% ≈ 165 ≈ 290 P30/19-3C81-A630 1000 ±3% ≈ 263 ≈ 170 P30/19-3C81-A1000 8300 ±25% ≈ 2180 ≈ 0 P30/19-3C81 3C91 8300 ±25% ≈ 2180 ≈ 0 P30/19-3C91 3F3 250 ±3% ≈ 66 ≈ 840 P30/19-3F3-E250 315 ±3% ≈ 83 ≈ 640 P30/19-3F3-A315 400 ±3% ≈ 105 ≈ 480 P30/19-3F3-A400 630 ±3% ≈ 165 ≈ 290 P30/19-3F3-A630 1000 ±3% ≈ 263 ≈ 170 P30/19-3F3-A1000 5750 ±25% ≈ 1510 ≈ 0 P30/19-3F3

2008 Sep 01 1009

P cores and accessories P30/19 Core sets of high permeability grades Clamping force for AL measurements, 250 ± 50 N. Properties of core sets under power conditions Note 1. Measured at 60 °C. GRADE AL (nH) µe AIR GAP (µm) TYPE NUMBER 3E27 15100 ±25% ≈ 3960 ≈ 0 P30/19-3E27 GRADE B( m T )a t C O R EL O S S( W )a t H=2 5 0A / m ; f = 25 kHz; T = 100 °C f = 25 kHz; =2 0 0m T ; T = 100 °C f=1 0 0k H z ; =1 0 0m T ; T=1 0 0 °C f=1 0 0k H z ; = 200 mT; T = 100 °C f = 400 kHz; =5 0m T ; T = 100 °C Bˆ Bˆ Bˆ Bˆ

2008 Sep 01 1010

P cores and accessories P30/19 COIL FORMERS General data CP-P30/19 coil former Winding data and area product for P30/19 coil former PARAMETER SPECIFICATION Coil former material polybutyleneterephtalate (PBT), glass reinforced, flame retardant in accordance with “UL 94V-0”; UL file number E45329 (R) Maximum operating temperature 155 °C, “IEC 60085”, class F NUMBER OF SECTIONS MINIMUM WINDING AREA (mm2) NOMINAL WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 53.2 11.1 62 7290 CP-P30/19-1S 22 × 24.9 2 × 5.15 62 2 x 3410 CP-P30/19-2S 33 × 15.5 3 × 3.2 62 3 x 2120 CP-P30/19-3S handbook, full pagewidth MGC135 15 0 0.23.2 13.7 0.2 24.7 0 0.2 0.7 0.7 0.6 0.6 12.8 0 0.2 Fig.2 Coil former: CP-P30/19. Dimensions in mm.

2008 Sep 01 1011

P cores and accessories P30/19 General data 6-pins P30/19 coil former for PCB mounting Winding data and area product for 6-pins P30/19 coil former for PCB mounting PARAMETER SPECIFICATION Coil former material polyamide (P A6.6), glass reinforced, flame retardant in accordance with “UL 94-HB”; UL file number E41938(M) Maximum operating temperature 130 °C, “IEC 60085”, class B Pin material copper-zinc alloy (CuZn), tin (Sn) plated Resistance to soldering heat “IEC 60068-2-20”, Part 1, Test Tb, method 1B, 350 °C, 3.5 s. For connection of wire to pins: 430 °C, 2 seconds Solderability “IEC 60068-2-20”, Part 2, Test Ta, method 1, 235 °C, 2 s NUMBER OF SECTIONS MINIMUM WINDING AREA (mm2) NOMINAL WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) MINIMUM LENGTH OF PINS (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 55.2 12.8 62.2 4.4 7560 CPV-P30/19-1S-6PD 1 55.2 12.8 62.2 6.8 7560 CPV-P30/19-1S-6PDL handbook, full pagewidth MGB62814.3 max 0.75 12.75 max 35.9 14.75 2.4 4.35 min 10.25 max 7.1 13.6 min 24.95 max 38.35 max Fig.3 P30/19 coil former for PCB mounting; 6-pins. Dimensions in mm.

2008 Sep 01 1012

P cores and accessories P30/19 MOUNTING PARTS General data and ordering information ITEM REMARKS FIGURE TYPE NUMBER Tag plate material: phenolformaldehyde (PF), glass reinforced 4 TGP-P30/19-C flame retardant: in accordance with “UL 94V-0”; UL file number E41429 maximum operating temperature: 180 °C, “IEC 60085”, class H pins: copper-tin alloy (CuSn), tin (Sn) plated resistance to soldering heat in accordance with “IEC 60068-2-20”, Part 2, Test Tb, method 1B: 350 °C, 3.5 s solderability in accordance with “IEC 60068-2-20”, Part 2, Test Ta, method 1: 235°C, 2 s Container copper-zinc alloy (CuZn), tin (Sn) plated 5 CON-P30/19 earth pins: presoldered Spring CrNi-steel 6 SPR-P30/19 spring force: ≈250 N when mounted Clamp spring steel, tin-plated 7 CLM/TS-P30/19 Fig.4 Tag plate: TGP-P30/19-C. Dimensions in mm. handbook, full pagewidth 2.1 2.2 15.24 10.16 10.165.08 15.24 mark 32.4 max. 4.8 ∅8.4 ∅0.8 2.54 CBW272 1.3 +0.15

2008 Sep 01 1013

P cores and accessories P30/19 handbook, full pagewidth CBW428 mark 8 21.4 max. 32.3 max. 28.25 min. 8.2 0.6 Fig.5 P30/19 container. Dimensions in mm. handbook, halfpage MGC138 29.2 max 2.3 0.3 Fig.6 P30/19 spring. Dimensions in mm.

2008 Sep 01 1014

P cores and accessories P30/19 handbook, halfpage MBE676 38.6 44.2 28.6 20.6 166.6 Fig.7 Clamp CLM/TS-P30/19. Dimensions in mm.

2008 Sep 01 1015

P cores and accessories P30/19 DATA SHEET STATUS DEFINITIONS DISCLAIMER Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains prelimin ary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability.