P2RF OMRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 27

Technical content

A Wide Variety of Square and Round Sockets in Front-mounting and Back-mounting Models

  • Models available with finger protection.
  • Hold-down Clips and Short Bars for PYFZ/PYF Sockets are also available.
  • New screwless models available.

Ordering Information

Note: 1. The structure of @-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals. 2. To remove the Relay, pull the lever on the Socket with your fingers supporting the lever and the opposite side of the Relay case, and jiggle the Relay. * Use a #1 Phillips screwdriver to tighten the screws on this Socket. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Model P2RF (front-mounting), page 8 P2R (back-mounting), pages 11 and 12 P7TF (front- mounting), page 12Number of pins Solder terminals PCB terminals 5 pins P2RF-05 Approx. 27 g P2RFZ-05-E Approx. 30 g P2RF-05-E Approx. 38 g P2R-05A Approx. 5 g P2R-05P Approx. 5 g P2R-057P Approx. 5.5 g P7TF-05 Approx. 28 g 8 pins P2RF-08 Approx. 33 g P2RFZ-08-E Approx. 38 g P2RF-08-E Approx. 38 g P2R-08A Approx. 5 g P2R-08P Approx. 5 g P2R-087P Approx. 5.5 g ---

Note: The structure of @-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals. *1. Use a #1 Phillips screwdriver to tighten the screws on this Socket. *2. The structure does not resist flux. Manual soldering is recommended for this product. Model PYF (front-mounting), pages 13 to 14 PY (back-mounting), pages 16 to 14 Number of pins Solder terminals Wrapping terminals PCB terminals 8 pins 11 pins 1 ? 14 pins PYF08A Approx. 32 g PYF08A-E *1 PYF08M Approx. 26 g PYFZ-08 Approx. H PYFZ-08-E *1 Approx. H PY08 Approx. 8 g PY08-Y1 PY08-Y3 PY08QN Approx. 12 g PY08QN2 PY08QN-Y1 PY08QN2-Y1 PY08-02 *2 Approx. 7.2 g PYF11A Approx. 43 g PY11 Approx. 9 g PY11-Y1 PY11QN PY11QN2 PY11QN-Y1 PY11QN2-Y1 PY11-02 *2 PYF14A-E *1 PYF14A Approx. 49 g PYFZ-14-E *1 Approx. 50 g PYFZ-14 Approx. 50 g PY14 Approx. 10 g PY14-Y1 PY14-Y3 PY14QN Approx. 14 g PY14QN2 PY14QN-Y1 PY14QN2-Y1 PY14QN-Y3 PY14QN2-Y3 PY14-02 *2

Note: The structure of @-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals. * Use a #1 Phillips screwdriver to tighten the screws on this Socket. * The structure does not resist flux. Manual soldering is recommended for this product. Model PTF (front-mounting), pages 18 to 15 PT (back-mounting), pages 19 to 16 Number of pins Solder terminals Wrapping terminals PCB terminals 8 pins 11 pins 14 pins PTF08A Approx. 47 g PTF08A-E *1 PT08 Approx. 11 g PT08QN Approx. 10.4 g PT08-0 *2 Approx. 8 g PTF11A Approx. 61 g PT11 Approx. 13 g PT11QN PT11-0 *2 Approx. 12.2 g PTF14A Approx. 77 g PTF14A-E *1 PT14 Approx. 17 g PT14QN Approx. 20 g PT14-0 *2 Approx. 16.2 g Model P7LF (front-mounting), page 20Number of pins6 pins P7LF-06 Approx. 60 g Note: Refer to Models with Standards Certification for detailed information on the models of Common Sockets that are certified for standards.

Note: The structure of @-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals. * Use a #1 Phillips screwdriver to tighten the screws on this Socket. Terminal Cover Model PF (front-mounting), page 21 P2CF (front-mounting), page 22 PFA (front-mounting), page 23 P3G (back-mounting), page 24 PL (back-mounting), page 25 Number of pins Solder terminals Wrapping terminals PCB terminals 8 pins 11 pins Model Y92A-48G Appearance PF083A Approx. 34 g PF083A-E * PF085A Approx. 40 g P2CF-08 Approx. 55 g P2CF-08-E 8PFA Approx. 57 g 8PFA1 Approx. 66 g P3G-08 Approx. 40g Note: The Y92A-48G Terminal Cover can be used to provide finger protection. PL08 Approx. 14 g PL08-Q Approx. 15 g PLE08-0 Approx. 10.6g PF113A Approx. 47 g PF113A-E * P2CF-11 Approx. 70g P2CF-11-E 11PFA Approx. 74 g P3GA-11 Approx. 47 g Note: The Y92A-48G Terminal Cover can be used to provide finger protection. PL11 Approx. 15 g PL11-Q Approx. 18.5A PLE11-0 Approx. 10.8 g 14PFA Approx. 104 g PL15 Approx. 28 g PL20 Approx. 17 g Note: Refer to Models with Standards Certification for detailed information on the models of Common Sockets that are certified for standards.

Hold-down Clips (Unit: mm) For Square Sockets For Round Sockets 71.8 9.6 4.5 1 2.5 2.7 2.7 3.3 4.5 PKC One Set (2 Clips) 36.3 40.7 PTC-1 4.5 1.2 36.3 Approx. 5 4.5 PYC-A1 Approx. 0.54 g One Set (2 Clips) 4.5 1.2 42.8 Approx. 5 4.5 PYC-A2 One Set (2 Clips) 4.5 ±0.1 5.8 1.2 4.3 36.3 Approx. 5 PYC-E1 One Set (2 Clips) 38.5 Approx. 329 max. PYC-P Approx. 1.4 g PYC-P2 Approx. 1.2 g 2.5 PYC-S Approx. 1.8 g 9.4 58.2 PYC-1 Approx. 6 g Approx. 328.8 PYC-2 29.5 44.5 PYC-3 3.7 41.7 PYC-5 3.7 34.5 PYC Approx. 0.2 g 3.5 3 5 72.9 10 2 1.5 1.5 34.7 23.5 Y92H-1 Approx. 5 4.51.24.5 Y92H-3 One Set (2 Clips) 30.5 24.5 2.5 (84°) 33.7 Y92H-4 4.6 6260.8 4.56 PFC-A1 Approx. 2.2 g One Set (2 Clips) 6 4.5 73.3 74.5 4.6 PFC-A6 Approx. 2.4 g One Set (2 Clips) 4.6 95.294 4.56 PFC-A7 Approx. 3.0 g One Set (2 Clips) 7.6 56.6 PLC Approx. 2.4 g One Set (2 Clips) 56.3 PLC-1 Approx. 2.6 g One Set (2 Clips) 65.769.2 PLC-7 Approx. 3.0 g One Set (2 Clips) 86.790.2 PLC-8 Approx. 6.4 g One Set (2 Clips) 66.2 PLC-10 Approx. 2.0 g One Set (2 Clips) 64.3 PLC-12 Approx. 5.4 g One Set (2 Clips)

Applicable Hold-down Clips For Square Sockets Note: The @ in the model number is replaced with 08, 11, or 14. * If you use a Hold-down Clip with the MY2I, you cannot use the PYF08A. Use the PYF14A. For Round Sockets Note: 1. The 8PFA(1), 11PFA, and 14PFA are held with hooks. 2. The PL15, PL20, and PF202, as well as models not given in the above table, require panel processing for installation. 3. The PF085A Hold-down Clip is included with the H3M and H2A. It is an option (sold separately) for the H2C. Sockets PYFZ-@ PYF@A PTF@A PYF08M PY@(QN) PT@(QN) PY@-02 PT@-0Applicable models MY@, MY@N, MY@-D, MY2@-CR, MY4@-CR, MY4Z@-CR, MY@-TU, MY2K, MY@N-D2, LY@, LY@N, LY@-TU, MYQ@, G3H(D) Series, G3F(D) Series, G3FM, and G9H PYC-A1 PYC PYC-P PYC-P PYC-S PYC-P MY@I * LY@I --- PYC-P2 MY4H --- PYC-P MY2Z@-CR MY3@-CR LY@-CR Y92H-3 --- PYC-1 G7K PKC --- H3Y Y92H-3 Y92H-4 Sockets PF083A PF113A PL08 (-Q) PL11 (-Q) PLE08-0 PLE11-0 P2CF-11 Applicable models 61F-03B, -04B PFC-A1 PLC PLC-10 --- 61F-GP-N, -GPN-BT 61F-GP-N8 ?61F-APN2 PFC-N8 PHC-5 MK2P Series, MK2KP, MK3P@(-US), and G3B(D) Series PFC-A1 PLC MK3ZP MK3LP PLC-1 MYA-NA1, -NB1 MYA-LA1, -LB1 MYA-NA2, -NB2 MYA-LA2, -LB2 PFC-A6 PLC-7 --- --- MYA-LA12, -LB12 PFC-A7 PLC-8 --- --- APR-S PFC-A6 PLC-7 --- --- LG2 PFC-A7 PLC-8 --- ---

  • The insulation resistance was measured with a 500-VDC insulation resistance meter at the same places as those used for measuring the dielectric strength. Safety Precautions Refer to Common Relay Precautions for general precautions. Model Continuous carry current Dielectric strength Insulation resistance* Remarks P2RFZ-05-E 10 A Between contact terminals of same polarity: 1,000 VAC for 1 min 1,000 MΩ min.Between coil and contact terminals: 4,000 VAC for 1 min P2RFZ-08-E 5 A Between contact terminals of different polarity: 3,000 VAC for 1 min 1,000 MΩ min.Between contact terminals of same polarity: 1,000 VAC for 1 min Between coil and contact terminals: 4,000 VAC for 1 min P2RF-05(-E) 10 A Between contact terminals of same polarity: 1,000 VAC for 1 min 1,000 MΩ min.Between coil and contact terminals: 4,000 VAC for 1 min P2RF-08(-E) 5 A Between contact terminals of different polarity: 3,000 VAC for 1 min 1,000 MΩ min.Between contact terminals of same polarity: 1,000 VAC for 1 min Between coil and contact terminals: 4,000 VAC for 1 min P2R-05P 10 A Between contact terminals of same polarity: 1,000 VAC for 1 min 1,000 MΩ min.Between coil and contact terminals: 4,000 VAC for 1 min P2R-08P 5 A Between contact terminals of different polarity: 3,000 VAC for 1 min 1,000 MΩ min.Between contact terminals of same polarity: 1,000 VAC for 1 min Between coil and contact terminals: 4,000 VAC for 1 min P2R-057P 10 A Between contact terminals of same polarity: 1,000 VAC for 1 min 1,000 MΩ min.Between coil and contact terminals: 5,000 VAC for 1 min P2R-087P 5 A Between contact terminals of different polarity: 3,000 VAC for 1 min 1,000 MΩ min.Between contact terminals of same polarity: 1,000 VAC for 1 min Between coil and contact terminals: 5,000 VAC for 1 min P2R-05A 10 A Between contact terminals of same polarity: 1,000 VAC for 1 min 1,000 MΩ min.Between ground terminals: 1,500 VAC for 1 min Between coil and contact terminals: 4,000 VAC for 1 min P2R-08A 5 A Between contact terminals of different polarity: 3,000 VAC for 1 min 1,000 MΩ min.Between contact terminals of same polarity: 1,000 VAC for 1 min Between ground terminals: 1,500 VAC for 1 min Between coil and contact terminals: 4,000 VAC for 1 min P7TF-05 5 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. PYFZ-08(-E) 10 A Between contact terminals of different polarity: 2,250 VAC for 1 min 1,000 MΩ min.Between contact terminals of same polarity: 2,250 VAC for 1 min Between coil and contact terminals: 2,250 VAC for 1 min PYF08A(-E) 7 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. The continuous carry current of 10 A for the PYF08S is for an ambient temperature of 55°C. At an ambient temperature of 70°C, the value is 7 A. PYF11A 5 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. PYFZ-14(-E) 6 A Between contact terminals of different polarity: 2,250 VAC for 1 min 1,000 MΩ min.Between contact terminals of same polarity: 2,250 VAC for 1 min Between coil and contact terminals: 2,250 VAC for 1 min PYF14A(-E) 3 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. PY08(-Y1)(-Y3) 7 A Between terminals: 1,500 VAC for 1 min 1,000 MΩ min. PY08QN(-Y1) 7 A Between terminals: 1,500 VAC for 1 min 100 MΩ min. PY08-02 7 A Between terminals: 1,500 VAC for 1 min 100 MΩ min. PY11(-Y1) 5 A Between terminals: 1,500 VAC for 1 min 100 MΩ min. PY11QN(-Y1) 5 A Between terminals: 1,500 VAC for 1 min 100 MΩ min. PY11-02 5 A Between terminals: 1,500 VAC for 1 min 100 MΩ min. PY14(-Y1)(-Y3) 3 A Between terminals: 1,500 VAC for 1 min 100 MΩ min. PY14QN(-Y1) 3 A Between terminals: 1,500 VAC for 1 min 100 MΩ min. PY14-02 3 A Between terminals: 1,500 VAC for 1 min 100 MΩ min. PTF@@A(-E) 10 A Between terminals: 2,000 VAC for 1 min 100 MΩ min. PT@@ 10 A Between terminals: 2,000 VAC for 1 min 100 MΩ min. PT@@QN 10 A Between terminals: 2,000 VAC for 1 min 100 MΩ min. PT@@-0 10 A Between terminals: 2,000 VAC for 1 min 100 MΩ min. P7LF-06 30 A Between contact terminals of different polarity: 2,000 VAC for 1 min 1,000 MΩ min.Between contact terminals of same polarity: 2,000 VAC for 1 min Between coil and contact terminals: 4,000 VAC for 1 min PF@@@A(-E) 5 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. P2CF-@(-E) 5 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. 8PFA(1) 10 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. 11PFA(1) 10 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. P3G(A)-@ 6 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. PL@(-Q) 10 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. PLE@@-0 10 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min.

P2RF (Unit: mm) Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions 19.5 max. 19.5 30 max. 35.5 4 dia. 54 max. 71.5 max. 5-M3.5×8 7±0.2 P2RF-05 (One Pole) 5 1 (Top View) 9.5 30±0.05 4.2-dia. hole M3 (M3 x 16) or 3.2-dia. hole Note: Track mounting is also possible. (Top View) 78.5 max. 61 max. 35.5 39.5 48 max. 2 (42.3) (35.8) 31 max. 3.5-dia. hole 16 max. 17.2 8-M3X8 P2RFZ-05-E (One Pole) (Finger Protection Structure) 5 1 (Top View) 39.5±0.1 10.5 M3 or 3.5-dia. hole 3.2-dia. hole Note: Track mounting is also possible. (Top View) *When mounted on H3RN-1@. 61 max. 164 85.5 max. 5-M3.5×7 3.5-dia. hole 7±0.2 11.5 48 max. 59 max. (80.9 max.)* 39.5 35.5 P2RF-05-E (One Pole) (Finger Protection Structure) (11) (14) (A1) (12) (A2) Note: Figures in parentheses indicate DIN standard numbers. (Top View) 39.5±0.1 3.2-dia. hole M3 or 3.5-dia. hole Note: Track mounting is also possible. (Top View)

Note: If an I/O SSR or Indicator Module is used, the polarity of terminal 1 is negative. Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions 7±0.2 19.5 max. 19.5 30 max. 35.5 4 dia. 54 max. 71.5 max. 8-M3.5×8 P2RF-08 (Two Poles) 5 4 7 2 8 1 6 3 (Top View) 9.5 30±0.05 4.2-dia. hole M3 (M3 x 16) or 3.2-dia. hole Note: Track mounting is also possible. (Top View) 78.5 max. 8-M3X8 3.5-dia. hole 16 max. 61 max. 31 max. 17.2 48 max. 2 35.5 39.5 (42.3) (35.8) P2RFZ-08-E (Two Poles) (Finger Protection Structure) 5 4 7 2 6 3 (Top View) 39.5±0.1 10.5 M3 or 3.5-dia. hole 3.2-dia. hole Note: Track mounting is also possible. (Top View) 1.52 85.5 max. 8-M3×8 3.5-dia. hole 6+0.2 −0.1 48 max. 3 dia. 35.5 11.561 max. 39.5 63 max. (84.9 max.)* *When mounted on H3RN-2@. P2RF-08-E (Two Poles) (Finger Protection Structure) (21) (22) (11) (24) (A1) (14) (12) (A2) 5 4 7 2 6 3 (Top View) Note: Figures in parentheses indicate DIN standard numbers. 39.5±0.1 3.2-dia. hole M3 or 3.5-dia. hole Note: Track mounting is also possible. (Top View)

Accessories for Screw Terminal Sockets (P2RFZ-@-E) Short Bars Note: Each Short Bar set comes with 20 Caps. Accessories for Short Bars (P2DN) Cap Pitch Applicable models Appearance Dimensions (mm) Model Maximum carry current 6.8 mm P2RFZ-05-E P2RFZ-08-E P2DN-6.8-100S 20 A 15.7 mm P2DN-15.7-100S Applicable models Appearance Dimensions (mm) Model P2RFZ-05-E P2RFZ-08-E P2DN-CP100 2.9 2.5 max. 15.4 max. 8.7 max. 6.8±0.1 15.7±0.1 152.7 max. 15.7±0.12.9 2.5 max. 1.6-dia. 15.4 max. 8.7 max. 152.7 max. 5.2 max. 4 max. 6 max.

P2R (Unit: mm) Note: If an I/O SSR or Indicator Module is used, the polarity of terminal 1 is negative. Dimensions Terminal Arrangement/ Internal Connections PCB Dimensions 3.5 7.514.5 max. 35.5 max. 3.5 1.5 7 4 36.5 max. 1.2 15 4.5 P2R-05P (One Pole) 1 5 (Bottom View) Five, 1.6-dia. holes 4.5 (5) (Bottom View) 1.5 7.5 2.8 0.3 7.5 3.5 35.5 max. 14.5 max. 36.5 max. P2R-08P (Two Poles) 4 5 3 6 2 7 1 8 (Bottom View) (4.3) 7.5 Eight, 1.3-dia holes (Bottom View) 29.6 0.7 8.7 8.7 14 max. 16.4 10.4 7.4 41 max. 37 max. 3.5 7 4 8.75 4.5 P2R-057P (One Pole) (Bottom View) 4±0.1 Five, 1.6-dia. holes 4±0.1 15±0.1 6±0.1 4.5±0.1 7±0.1 (8.75) (Bottom View) 7.5 8.9 41 max. 7.4 0.3 16.4 10.4 29.137 max. 14 max. 7.5 3.5 8.1 P2R-087P (Two Poles) 4 5 3 6 2 7 1 8 (Bottom View) 7.5 Eight, 1.3-dia holes (8.1) (Bottom View)

P2R (Unit: mm) Note: If an I/O SSR or Indicator Module is used, the polarity of terminal 1 is negative. P7TF (Unit: mm) Note: If an I/O SSR or Indicator Module is used, the polarity of terminal 1 is positive. Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions 0.3 7.5 1.2 4.5 Five, 3 x 1.8-dia. holes 16.73.8 36.5 max. 6.7 35.5 max. 14.5 max. P2R-05A (One Pole) 1 5 (Bottom View) 30.5+0.2 13.6±0.1 (Use panel with thickness of 1.6 to 2.0 mm.) 36.5 max. 7.5 1.5Eight, 3 x 1.2-dia. holes 14.5 max. 35.5 max. 2.82.6 20 7.5 6.5 1.2 0.3 P2R-08A (Two Poles) 4 5 3 6 2 7 1 8 (Bottom View) 19 max. 7+0.2 5-M3.5×8 71.5 max. 12.5±0.2 60.5 max. 19.5 35.5 P7TF-05 (Top View) 12.5±0.2 62±0.1 M3 or M4* Note: Track mounting is also possible. * We recommend that you use washers if you use M3 bolts or screws. Washers are not required with M4 bolts or screws. (Top View)

PYFZ/PYF (Unit: mm) Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions 35.4 23 max. 30 max. 72 max. 8-M3×8 Two, 4.2 × 5 mounting holes 6+0.2 −0.1 35.4 31 max.23 max. 72 max. 8-M3×8 Two, 4.2 × 5 mounting holes 6+0.2 −0.1 PYFZ-08 PYFZ-08-E (Finger Protection Structure) (Top View) 4 1 912 14 13 Two M3 or M4 or 4.5-dia. holes ±0.3 15±0.2 Note: Track mounting is also possible. (Top View) 35.4 3.4 23 max. 30 max. 72 max. 6+0.2 −0.1 8-M3×8 Two, 4.2 × 5 mounting holes 3.4 35.4 31 max.23 max. 72 max. 8-M3×8 Two, 4.2 × 5 mounting holes +0.2 −0.1 PYF08A PYF08A-E (Finger Protection Structure) 4 1 912 14 13 (Top View) Two M3 or M4 or 4.5-dia. holes ±0.3 15±0.2 Note: Track mounting is also possible. (Top View) 7±0.2 3 dia. 18 max. 44.5 max. 3.5-dia. mounting holes 6.5-dia. countersinking, depth: 11.5 33.5 max. 1.5 8-M3.5×7.5 PYF08M (Top View) 20±0.1 3.5-dia. hole 3.5-dia. or M3 hole 29.5 max. Two, 4.2 × 5 mounting holes 11-M3×8 3.4 35.4 16.5 30 max. 72 max. +0.2 −0.1 PYF11A 456 789 11 10 (Top View) 22±0.2 59±0.3 Two M3 or M4 or 4.5-dia. holes Note: Track mounting is also possible. (Top View)

PYFZ/PYF (Unit: mm) Relay Sockets and Short Bars for PYFZ/PYF Bridges within the Same Socket Note: The @ in the model number is replaced with the insulation color specification code. B: Black, Y: Yellow Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions Pitch Applicabl e models Appearance Dimensions (mm) Model Specifications mm PYFZ-14 PYF14A PYD-020B@(2P) Max. carry current: 20 A (18 A at 70°C) Ambient operating temperature: -40 to 70°C (with no icing or condensation) Ambient operating humidity: 45% to 85% (with no icing or condensation) Conductor material: Brass Conductor surface treatment: Nickel plating Package qty: 50/bag PYD-030B@(3P) 29.5 max. Two, 4.2 × 5 mounting holes 14-M3×8 35.4 30 max. 72 max. 6+0.2 −0.1 29.5 max. Two, 4.2-dia × 5 mounting holes 14-M3×8 35.4 31 max. 72 max. 6+0.2 −0.1 PYFZ-14 PYFZ-14-E (Finger Protection Structure) (Top View) 91012 11 144 13 68 7 Note: Track mounting is also possible. (Top View) 22±0.2 59±0.3 Two M3 or M4 or 4.5-dia. holes 29.5 max. Two, 4.2 × 5 mounting holes 14-M3×8 3.4 35.4 16.5 30 max. 72 max. 6+0.2 −0.1 29.5 max. Two, 4.2-dia × 5 mounting holes 14-M3×8 3.4 35.4 16.5 31 max. 72 max. 6+0.2 −0.1 PYF14A PYF14A-E (Finger Protection Structure) 91012 11 144 13 68 7 (Top View) 22±0.2 59±0.3 Two M3 or M4 or 4.5-dia. holes Note: Track mounting is also possible. (Top View) 3.2 5.6 7 7 3.2 5.6

Bridges between Adjacent Sockets Note: The @ in the model number is replaced with the insulation color specification code. B: Black, S: Blue, R: Red Terminal Covers for PYFZ-08/PYFZ-14 Note: These covers cannot be used for PYF08A and PYF14A. Use these covers in a combination with PYFZ-08 and PYFZ-14. Dimensions with terminal cover (Unit: mm) Pitch Applicabl e models Appearance Dimensions (mm) Model Specifications mm PYFZ-08 PYF08A PYD-025B@(2P) Max. carry current: 20 A (18 A at 70°C) Ambient operating temperature: -40 to 70°C (with no icing or condensation) Ambient operating humidity: 45% to 85% (with no icing or condensation) Conductor material: Brass Conductor surface treatment: Nickel plating Package qty: 10/bagPYD-085B@(8P)29 mm PYFZ-14 PYF14A PYD-026B@(2P) Max. carry current: 20 A (18 A at 70°C) Ambient operating temperature: -40 to 70°C (with no icing or condensation) Ambient operating humidity: 45% to 85% (with no icing or condensation) Conductor material: Brass Conductor surface treatment: Nickel plating Package qty: 10/bagPYD-086B@(8P) Applicable models Appearance Model PYFZ-08 PYCZ-C08 (2 pcs/set) PYFZ-14 PYCZ-C14 (1 pcs/set) 22 40° 3.3 5.6 154 40° 3.3 5.6 29 40° 3.3 5.6 203 40° 3.3 5.6 72 max. 23 max. 33 max. PYCZ-C08 72 max. 34 max.29.5 max. PYCZ-C14

PY (Unit: mm) Dimensions Terminal Arrangement/ Internal Connections Mounting hole and PCB dimensions L 20 max. 2.7 * Eight, 3 x 1.2 ellipses 7.7 24 max. 2.6 25.5 max. 29.5 max. *The PY08-Y@ includes the part outlined by the dashed lines above. PY08 PY08-Y1 (L = 42 max.) PY08-Y13 (L = 60 max.) 1 4 5 8 9 12 13 14 (Bottom View) 4.1 12.656.35 6.4 4.2 Eight, 1.3-dia holes 5.8 13.2 25.8±0.2 21.4+0.2 42 max. 41.5 max. (36.5 max.)*2 2.7 (20)*2 25 22 max. 24 max. 29.5 max. *1. The PY08QN(2)-Y1 includes the part outlined by the dashed lines above. *2. The figures in the parentheses are for the PY08QN2(-Y1). PY08QN PY08QN2 PY08QN-Y1 PY08QN2-Y1 16.5 max. 2.7 4.3 0.3 22 max. 25.5 max. 1.0 29.5 max. PY08-02 * The structure does not resist flux. Manual soldering is recommended for this product. 42 max. 20 max. 2.7 * Eleven, 3 x 1.2 ellipses 7.7 24 max. 2.6 25.5 max. 29.5 max. *The PY11-Y1 includes the part outlined by the dashed lines above. PY11 PY11-Y1 21 3 54 6 87 9 10 11 (Bottom View) 4.1 12.656.35 6.4 4.2 Eleven, 1.3-dia holes 5.8 13.2 25.8±0.2 21.46+0.2 22 max. 24 max. 29.5 max. 42 max. 41.5 max. (36.5 max.)*2 2.7 (20)*2 *1. The PY11QN(2)-Y1 includes the part outlined by the dashed lines above. *2. The figures in the parentheses are for the PY11QN2(-Y1). PY11QN PY11QN2 PY11QN-Y1 PY11QN2-Y1 2.7 4.3 0.3 22 max. 25.5 max. 1.0 29.5 max. 16.5 max. PY11-02 * The structure does not resist flux. Manual soldering is recommended for this product.

Note: 1. Use a panel with a thickness of 1 to 2 mm when mounting a Socket on it. 2. You can use the PY14-Y1 or PY14QN-Y1 for the MY4 Series, MY4H, MYQ4(Z), or MY2K. 3. You can use the PY14-Y3 or PY14QN-Y3 for H3Y Timers. Dimensions Terminal Arrangement/ Internal Connections Mounting hole and PCB dimensions 20 max. 2.7 * Fourteen, 3 x 1.2 ellipses 7.7 24 max. 2.6 25.5 max. 29.5 max. L *The PY14-Y@ includes the part outlined by the dashed lines above. PY14 PY14-Y1 (L = 42 max.) PY14-Y3 (L = 60 max. ) 321 4 765 8 11109 12 13 14 (Bottom View) 25.8±0.2 21.4+0.2 4.1 12.656.35 6.4 4.2 Fourteen 1.3-dia. holes 5.8 13.2 4.4 L 22 max. 24 max. 29.5 max. 41.5 max. (36.5 max.)*2 2.7 (20)*2 *1. The PY14QN-Y@ and PY14QN2-Y@ include the part outlined by the dashed lines above. *2. The figures in the parentheses are for the PY14QN2(-Y@). PY14QN PY14QN2 PY14QN-Y1 (L = 42 max.) PY14QN2-Y1 (L = 42 max.) PY14QN-Y3 (L = 60 max.) PY14QN2-Y3 (L = 60 max.) 2.7 4.3 0.3 22 max. 25.5 max. 1.0 29.5 max. 16.5 max. PY14-02 * The structure does not resist flux. Manual soldering is recommended for this product.

PTF (Unit: mm) Note: If you use the PTF08A, PTF08A-E, or PT08 with an LY1 Relay, connect the following terminal pairs: 1-2, 3-4, and 5-6 (for usage at 10 A or higher). Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions 35.4 30 max.28.5 max. 78.5 max. 3.4 8-M3.5×8 Two, 4.5 × 6 mounting holes 7±0.2 PTF08A 6 5 8 7 2 1 (Top View) 68±0.3 Two, 4.5 dia. or M4 mounting holes 19±0.2 Note: Track mounting is also possible. (Top View) 35.5 3.4 33 max.28.5 max. 78.5 max. 8-M3.5×8 Two, 4.5 × 6 mounting holes PTF08A-E (Finger Protection Structure) 3.4 30 max. 37 max. 78.5 max. 11-M3.5×8 Two, 4.5 × 6 mounting holes 35.4 7±0.2 PTF11A 6 5 4 3 2 1 (Top View) 68±0.3 Two, 4.5 × 6 mounting holes 27.5±0.2 Note: Track mounting is also possible. (Top View) 30 max. 45.5 max. 78.5 max. Two, 4.5 × 6 mounting holes 35.4 3.47 ±0.2 14-M3.5×8 PTF14A 11 10 912 1314 7 6 5 4 3 2 1 (Top View) 68±0.3 Two, 4.5 dia. or M4 mounting holes 36±0.2 (Top View) Note: Track mounting is also possible. 7±0.2 33 max. 45.5 max. 78.5 max. Two, 4.5 × 6 mounting holes 14-M3.5×8 35.5 3.4 PTF14A-E (Finger Protection Structure)

PT (Unit: mm) Dimensions Terminal Arrangement/ Internal Connections Mounting hole and PCB dimensions 20.5 max. Eight, 1.7-dia × 3.5 oblong holes 2.7 0.3 24 max. 25.5 max. 29.5 max. 24 max. 29.5 max. 25.5 max. 1.0 1.5×1.0 1.52.7 2.5 20 35 max. PT08 PT08QN 7 8 (Bottom View) 21.4+0.2 25.8±0.2 0.3 2 5* 4.31 18 max. 22 max. 6.5 29.5 max.  The structure does not resist flux. Manual soldering is recommended for this product. *Maintain a sufficient distance from the pattern when using double-sided PCBs. PT08-0 5.35 15.6 6.5 6.45 Eight, 2.5-dia. holes 12.45 4.6 (±0.1 tolerance) 30.6 26.41.2 Eleven, 1.7-dia × 3.5 holes 0.3 20.5 max. 2.7 29.5 max. max. 35 max. 2.5 20 29.5 max. 26.41.2 1.0 1.5×1.0 2.7 max.30.61.5 PT11QNPT11 4710 1 58 2 6911 3 (Bottom View) 26.6+0.3 31±0.2 32 max. 6.24.32.7 25 * 0.3 18 max. 29.5 max.  The structure does not resist flux. Manual soldering is recommended for this product. *Maintain a sufficient distance from the pattern when using double-sided PCBs. PT11-0 6.45 4.6 Eleven, 2.5-dia. holes 5.2 21.4 5.8 6.2 5.65 12.45 (±0.1 tolerance)

Note: Use a panel with a thickness of 1 to 2 mm when mounting a Socket on it. P7LF (Unit: mm) Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions Dimensions Terminal Arrangement/ Internal Connections Mounting hole and PCB dimensions 42.5 max. 0.3 Fourteen, 1.7-dia × 3.5 holes 2.7 20.5 max. 26.5 max. 29.5 max. 1.0 1.5×1.0 35 max. 2.7 2.5 20 1.5 42.5 max. 26.5 max. 29.5 max. PT14 PT14QN 5913 1 610 2 711 812 14 4 (Bottom View) 26.6+0.3 41±0.2 42.5 max. 29.5 max. 17.5 max. 2.7 4.3 26.5 max. 6.4 25 * 0.3  The structure does not resist flux. Manual soldering is recommended for this product. *Maintain a sufficient distance from the pattern when using double-sided PCBs. PT14-0 5.1 31.4 5.8 6.4 12.45 4.6 6.45 5.45 Fourteen, 2.5-dia. holes (±0.1 tolerance) 8±0.05 9.2±0.05 2-M3.5×6 (coil side) 25 5 51.5 max. 46 max.40±0.1 55.5 max. 4-M4×8 (contact side) P7LF-06 2 4 6 8 0 1 (Top View) Two, 4.5 dia. or M4 mounting holes 40±0.1

PF (Unit: mm) Note: 1. For the PF083A and PF113A, the Socket key slot is on the top. (Applicable model: MK) 2. The structure of @-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals. Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions 21 max. 23.533 Two, 4.2 dia. holes 35.4 7±0.2 52 max. 41 max. 8-M3.5×7 PF083A 2 1 8 7 3 4 5 6 (Top View) 33±0.2 Two M4 or 4.5-dia. holes Note: Track mounting is also possible. 41 max. 7±0.2 Two, 4.2-dia mounting holes 8 25 dia. 21 max. 23.5 35.4 52 max. 8-M3.5×7 PF083A-E 7±0.2 33±0.24 58 max. 8-M3.5×7 35.4 21.6 max. 21.1 3.540 max. Two, 4.5 dia. holes PF085A 6 5 4 3 7 8 1 2 (Top View) 7±0.2 31 max. 35.4 2211-M3.5×7 23.5 43 max. 34 45 52 max. PF113A 1 11 10 6 7 8 (Top View) 34±0.2 Two M4 or 4.5-dia. holes Note: Track mounting is also possible. 31 max. 5.5 3.5 35.48 7±0.211-M3.5×5 4 5.2 4.2 52 max. 42.8 PF113A-E

P2CF (Unit: mm) Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions 70 max. Two, 4.5 dia. holes 8-M3.5×7.5 7.8 20.3 max. 4.53 50 max. 35.4 P2CF-08 6 5 4 3 7 8 1 2 (Top View) 40±0.2 Two M4 or 4.5-dia. holes Note: Track mounting is also possible. 1278 4365 P2CF-08-E 10A250VAC RESISTIVE 70 max. Two, 4.5 dia. holes 8-M3.5×7.5 7.8 21.5 max. 20.3 4.5 35.41.3 50 max. 40±0.2 P2CF-08-E 70 max. 50 max. Two, 4.5 dia. holes 11-M3.5×7.5 7.8 31.2 max. 4.53 35.4 P2CF-11 8 7 6 5 10 11 1 2 (Top View) 40±0.2 Two M4 or 4.5-dia. holes Note: Track mounting is also possible. 10 11 12 786 5 P2CF-11-E 10A250VAC RESISTIVE 70 max. 50 max. 40±0.2 Two, 4.5 dia. holes 11-M3.5×7.5 7.8 31.2 max. 4.5 35.41.2 5P2CF-11-E

PFA (Unit: mm) Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions 118 max. 51 max. 24 max. 40±0.2 81 max. 35.4 Two, 4.5 dia. holes 7.8±0.28-M3.5×7 8PFA 6 5 4 3 7 8 1 2 (Top View) 40±0.2 Two M4 or 4.5-dia. holes Note: Track mounting is also possible. 8-M3.5×7 93 max. 7.8±0.2 130 max.35.4 Two, 4.5 dia. holes 24 max. 51 max. 40±0.24 8PFA1 40±0.2 81 max. 11-M3.5×7 7.8±0.2 Two, 4.5 dia. holes 35.4 118 max. 51 max. 33.5 max. 11PFA 8 7 6 5 10 11 1 2 (Top View) 40±0.2 Two M4 or 4.5-dia. holes Note: Track mounting is also possible. 60±0.2 Two, 4.5 dia. holes 33.5 max. 35.4 118 max. 7.8±0.214-M3.5×7 72 max. 81 max. 14PFA 7 14 6 4 5 12 15 1 29 10 11 (Top View) 60±0.2 Two, 4.5 dia. or M4 mounting holes Note: Track mounting is also possible.

P3G/P3GA (Unit: mm) Terminal Cover (Unit: mm) Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions --- --- Appearance Dimensions 27 dia. 4.9 17 Eight, M3.5 SEMS screws P3G-08 Note: The Y92A-48G Terminal Cover can be used to implement finger protection. 43 5 6 12 8 7 (Bottom View) Eleven, M3.5 SEMS screws 27 dia. 4.5 16.3 6.2 25.645 P3GA-11 Note: The Y92A-48G Terminal Cover can be used to implement finger protection. 8765 2 1 11 10 (Bottom View) Y92A-48G UP P C Twelve, 6.4 dia. 47.7 × 47.7 48 × 48 27.624.616.5 47.4 Y92A-48G

PL (Unit: mm) Dimensions Terminal Arrangement/ Internal Connections Mounting hole and PCB dimensions (bottom view) 30 dia. Approx. 20.5 3.9 Two, 2 dia. holes 50.5 max. 50.5 max. 3.5 PL08 1 8 (Bottom View) 40±0.3 31-dia. hole Two, 3.5 dia. or M3 device mounting holes Two, 3.5 or M3 Socket mounting holes L L = 40 mm MK2(Z)P L = 74 mm PU, AMD-S, MM2(X)P, CZ, STP, H3L, TDS, DTS, DSP, TDF, TDV L = 86 mm 61F-GP/-APN, G4Q-212S, RD2P, RDA, TDA, AGF, SE, SAD, K2CU, SDV-F 51 max. 35 max. 3.5 4 30 dia. 35 max. t0.6×1.3 PL08-Q 40±0.3 31-dia. hole Two 3.5-dia. or two M3 Socket mounting holes MK2(Z)P 29±0.1 dia. t0.3 21.5 max. PLE08-0 27.7±0.5 dia. Two 3.5-dia. Hold-down Clip mounting holes 45° Eight, 2.5-dia. holes +0.1

0 MK2(Z)P

3.5 35 max. 30 dia. Approx. 20.5 3.9 Two 2-dia. holes 1 4 51 max. PL11 2 1 11 10 (Bottom View) 40±0.3 31-dia. hole Two, 3.5 dia. or M3 device mounting /Hold-down Clip mounting holes Two, 3.5 dia. or M3 Socket mounting holes L L = 40 mm MK3P MK2KP L = 74 mm MM3P MK2(X)KP L = 42 mm MK3ZP MK3LP 51 max. 35 max. 3.5 4 35 max. t0.6×1.3 PL11-Q 22 max. t0.3 29±0.1 dia. PLE11-0 28.7±0.5 Two, 3.5-dia. holes Applicable model/Hold-down Clip mounting holes L Eleven, 2.5-dia. holes 360° L = 42 mm MK3ZP MK3LP L = 40 mm MK3P MK2KP 66 max. 53 45 max. 41 max. Two 2-dia. holes 3.9 22 max. 4 41 PL15 3 4 789 2 12 1415 (Bottom View) 4.2-dia. hole Two, 3.5 dia. or M3 device mounting holes Two, 3.5 dia. or M3 Socket mounting holes MM3XP MM4(X)P MM3(X)KP MM4(X)KP

Note: When mounting, pay due attention to the direction of the key groove of applicable Relays. Dimensions Terminal Arrangement/ Internal Connections Mounting hole and PCB dimensions (bottom view) 4Two, 3.5-dia. holes 31 max. 36.5 max. 46.5 max. 3.9 23 max. Two, 2 dia. PL20 12 10 8 (Bottom View) 56±0.2 Two, 4.5-dia. Relay mounting holes Two, 4-dia. Socket mounting holes 33-dia. hole ±0.2 * Relay mounting holes are not required for the LDNP.

Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT , MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Re medy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environmen ts. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT , INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT , WARRANTY , NEGLIGENCE OR STRICT LIABILITY . Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall no t be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine , system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2019.11 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2019 All Right Reserved.