P2ALE NVENT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

PROLINE G2 Ext ERNaL COmPONEN ts Top and Cover aCC essories nVent.com/HOFFMAN SUBJECT TO CHANGE WITHOUT NOTICEmOduL aR ENCLO suRE sOLutIONs1 Spec-01194 D Spec-01194 LIftING EyEs aPPLIC atION Lifting Eyes are used for lifting PROLINE G2 modular frames and for fastening PROLINE G2 top accessories to the frame.

fEatuREs

  • Designed for overhead lifting in conjunction with shackles and a spreader bar
  • Thread into corner blocks in a frame sPECIfICatIONs
  • Furnished in sets of four
  • Use of shackles instead of hooks is preferred
  • The angle between the top of the enclosure and the cable or chain must be at least 45 degrees
  • Use only slings and spreader bars that are designed for the specific application and are in compliance with regulations established by OSHA, ASME, ISA, ASTM and other governing agencies fINIsH
  • Plated LOad RatING
  • 750 lb (340 kg) per lifting eye, straight vertical pull
  • 500 lb (226 kg) per lifting eye. 45 degree pull Bulletin: p 40 Catalog Number Description P2ALE Lifting Eyes, Qty 4 LIftING aNGLE s aPPLIC atION Lifting Eyes thread into the steel corner blocks of a modular enclosure to facilitate overhead lifting.
  • Set of two angles, mounting hardware included
  • Used to provide best load distribution while lifting two or three joined/ganged enclosures with up to 1000 lb (453 kg) of equipment and cabling in each bay
  • Angles mount to top of enclosure frame corner blocks and do not require removal of top cover for installation sPECIfICatIONs
  • Lifting Angles are designed for overhead lifting in conjunction with shackles and a spreader bar
  • Use of shackles instead of hooks is preferred
  • The angle between the top of the enclosure and the cable or chain must be at least 45 degrees
  • 10 gauge (3.0mm), mild steel
  • Use only slings and spreader bars that are designed for the specific application and are in compliance with regulations established by OSHA, ASME, ISA, ASTM and other governing agencies fINIsH
  • Plated LOad RatING 1500 lb (680 kg) per angle 3000 lb (1360 kg) set of 2 Bulletin: p 40 Catalog Number Description P2ALAFB Front-to-Back Lifting Angles P2ALASS Side-to-Side Lifting Angles

PROLINE G2 Ext ERNaL COmPONEN ts Top and Cover aCC essories PH 763.422.2211nVent.com/HOFFMAN mOduL aR ENCLO suRE sOLutIONs 2 Spec-01194 D LIftING BaRs aPPLIC atION Lifting Bars provide the best load distribution while lifting joined enclosures, each containing up to 3000 lbs. per bay of equipment and cabling. Bars mount to top of enclosure frame corner blocks and do not require removal of top cover for installation. Kit consists of two bars, bolts and washers.

  • Set of two bars
  • Can be used to lift joined enclosures up to 6 bays
  • Load rating: 3000 lbs. (1360 kg) per bay sPECIfICatIONs
  • Mounts to top of frame corner blocks
  • Does not require removal of top
  • Consists of two bars, bolts and washers
  • Designed for overhead lifting in conjunction with shackles and spreader bars. Use of shackles instead of hooks is preferred
  • Use only spreader bars that are in compliance with regulations established by OSHA, ASME, ISA, ASTM or other governing agencies
  • Angle between top of enclosure and the cable or chain greater than or equal to 45 degrees fINIsH Clear zinc coated steel LOad RatING
  • Load rating: 3000 lb (1360 kg) per bay
  • Can be used to lift joined enclosures up to 6 bays Bulletin: p 40 Catalog Number Description P2ALB12 LIFTING BARS 1200mm SET OF 2 P2ALB14 LIFTING BARS 1400mm SET OF 2 P2ALB16 LIFTING BARS 1600mm SET OF 2 P2ALB18 LIFTING BARS 1800mm SET OF 2 P2ALB20 LIFTING BARS 2000mm SET OF 2 P2ALB22 LIFTING BARS 2200mm SET OF 2 P2ALB24 LIFTING BARS 2400mm SET OF 2 P2ALB26 LIFTING BARS 2600mm SET OF 2 P2ALB28 LIFTING BARS 2800mm SET OF 2 P2ALB30 LIFTING BARS 3000mm SET OF 2 fRamE LIftING aCCE ssORIEs LOad CHaRt Item Load Rating* (lb/kg) Recommended no. of Enclosures Lifting Eyes 2000/907 (set of 4) 500/226 (per eye) 1-2 Lifting Angles 3000/1360 2-3 Lifting Bar 3000/1360 3-6 * Specified at a 45 degree lift angle suPPORt BRaCkEt kIt aPPLIC atION Support Brackets cross the depth of a modular enclosure and can be used for additional support for heavy devices mounted on the sides or tops.
  • Brackets provide additional support for large air conditioners or other heavy devices that can be mounted on PROLINE G2 sides or tops
  • Can be positioned at various heights to accommodate any size air conditioner or device sPECIfICatIONs
  • Support brackets fit on the sides, top or base (along the depth) to provide two horizontal rigid supports
  • 14 gauge (1.75 mm) steel
  • Furnished in pairs
  • Installation hardware included fINIsH Plated Bulletin: p 40 Catalog Number Length mm/in. Fits Frame Depth mm P2ACB4 256 10.0 400 P2ACB5 356 14.0 500 P2ACB6 456 18.0 600 P2ACB8 656 25.8 800 P2ACB10 856 33.7 1000

PROLINE G2 Ext ERNaL COmPONEN ts Top and Cover aCC essories nVent.com/HOFFMAN SUBJECT TO CHANGE WITHOUT NOTICEmOduL aR ENCLO suRE sOLutIONs3 Spec-01194 D dRIP sHIELd aPPLIC atION The PROLINE G2 Drip Shield is used on the inside of the door to provide additional protection from liquid and contaminants. The frame of the PROLINE G2 includes a flange trough collar to protect the interior from dust and debris settling on the top of the enclosure. The Drip Shield effectively increases the depth of the trough, and provides additional protection for Type 3R applications. sPECIfICatIONs

  • Provides additional protection from liquid contaminants and debris
  • Mounted inside the door cover; directly on the top through the M12 mounting holes.
  • Can be mounted on either the front or rear of the enclosure (running left-to-right only).
  • All mounting hardware included
  • 16 gauge mild steel fINIsH
  • Polyester powder paint
  • RAL 7035 textured light gray standard
  • Custom colors available Bulletin: p 40 Catalog Number Length (mm) Length (in.) P2ADS4 379 14.9 P2ADS6 579 22.8 P2ADS8 779 30.7 P2ADS10 979 38.5 P2ADS12 1179 46.4 P2ADS16 1579 62.2 P2ADS18 1779 70.0 dust COvER aPPLIC atION The PROLINE G2 Dust Cover can be used across the top of joined enclosures to provide a finished appearance. The Dust Cover is not required to maintain a Type 12 rating. It is purely for enhanced aesthetics. sPECIfICatIONs
  • Provides a finished appearance across the top of the joined enclosures
  • Not required to maintain Type 12 rating
  • 16 gauge mild steel fINIsH
  • Polyester powder paint
  • RAL 7035 textured light gray standard
  • Custom colors available Bulletin: p 40 Catalog Number Length (mm) Length (in.) P2ADC4 364 14.3 P2ADC5 464 18.3 P2ADC6 564 22.2 P2ADC8 764 30.1 P2ADC10 964 38.0 WaLL BRaCkEts The PROLINE G2 Anti-Tip Bracket Kit secures the top of an enclosure to a fixed surface such as a wall, and protects against enclosure tipping. The brackets are made from 10 gauge mild steel, and are Polyester powder-painted RAL 7035 textured light gray. The kit comes with a single pair of brackets and mounting hardware to affix brackets to the enclosure. The PROLINE G2 Wall Bracket Kit secures both the top and bottom of an enclosure to a fixed surface such as a wall. The same brackets are used in both the Anti-Tip and Wall Bracket kits. The Wall Bracket kit comes with two pairs of brackets and mounting hardware to affix brackets to the enclosure. The bracket kit is rated to 800 lbs. (363 kg). Note: mounting hardware for securing brackets to the wall is not sold by Hoffman, and is the responsibility of the customer. Bulletin: p 40 Catalog Number Description P2AATB Anti-Tip Bracket Kit P2AWB Wall Bracket Kit

PROLINE G2 Ext ERNaL COmPONEN ts Top and Cover aCC essories PH 763.422.2211nVent.com/HOFFMAN mOduL aR ENCLO suRE sOLutIONs 4 Spec-01194 D Notes