P277CE103K300A

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 014_PME271E_X1_300 • 5/19/2016 One world. One KEMET Benefits

• A pprovals: ENEC, UL R ated voltage: 300 VAC 50/60 Hz Ca pacitance range: 0.01 – 0.22 µF L ead spacing: 15.2 – 25.4 mm
• Capacitance tolerance: ±20% for C 0.1 µF, ±10% for C 0.1 µF C limatic category: 40/110/56/B, IEC 60068–1 T ape and reel packaging in accordance with IEC 60286–2 R oHS Compliant and lead-free terminations
• Operating temperature range of −40˚C to +110˚C 00% screening factory test at 2,150 VDC H ighest possible safety regarding active and passive flammability Overview The PME271E Series consists of multilayer metallized paper, encapsulated and impregnated in self-extinguishing material meeting the requirements of UL 94 V–0.

Applications

Typical applications include worldwide use as an electromagnetic interference suppressor in all X1 and across-the-line applications. AC Line EMI Suppression and RC Networks PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Legacy Part Number System PME271 E (D) 510(0) M R30 Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF) Capacitance Tolerance Packaging X1, Metallized Paper E = 300 Blank = Standard D = 22.5 The last three digits represent significant figures. The first digit specifies the t otal number of digits. M = ±20% (for C ≤ 0.1 µF) K = ±10% (for C > 0.1 µF) See Ordering Options Table New KEMET Part Number System P 277 Q E 103 M 300 A Capacitor Class Series Lead Spacing (mm) Size Code Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VAC) Packaging P = Paper X1, Metallized Paper Q = 15.2 C = 20.3 S = 22.5 E = 25.4 See Dimension Table First two digits represent si gnificant fi gures. Third digit s pecifies number of ze ros. M = ±20% (for C ≤ 0.1 µF) K = ±10% (for C > 0.1 µF) 300 = 300 See Ordering Options Table

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 014_PME271E_X1_300 • 5/19/2016 Film Capacitors AC Line EMI Suppression and RC Networks – PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Benefits cont'd

• E xcellent self-healing properties which ensure long life even when subjected to frequent over-voltages G ood resistance to ionization due to impregnated paper dielectric
• H igh dV/dt capability I mpregnated paper ensures excellent stability and reliability properties, particularly in applications with continuous operation Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging Lead Length (mm) KEMET Lead and Packaging Code Legacy Lead and Packaging Code 15.2 Standard Lead and Packaging Options Bulk (Bag) – Short Leads 6 +0/−1 C R06 Bulk (Bag) – Max Length Leads 30 +5/−0 A R30 Tape & Reel (Standard Reel) H0= 18.5 +/−0.5 L R19T0 Other Lead and Packaging Options Tape & Reel (Large Reel) H0= 18.5 +/−0.5 P R19 T1 20.3 Standard Lead and Packaging Options Bulk (Tray) – Short Leads 6 +0/−1 C R06 Bulk (Bag) – Max Length Leads 30 +5/−0 A R30 Tape & Reel (Standard Reel) H0= 18.5 +/−0.5 L R19T0 Other Lead and Packaging Options Tape & Reel (Large Reel) H0= 18.5 +/−0.5 P R19T1 22.5 Standard Lead and Packaging Options Bulk (Tray) – Short Leads 6 +0/−1 C R06 Bulk (Bag) – Max Length Leads 30 +5/−0 A R30 Tape & Reel (Standard Reel) H0= 18.5 +/−0.5 L R19T0 Other Lead and Packaging Options Tape & Reel (Large Reel) H0= 18.5 +/−0.5 P R19T1 25.4 Standard Lead and Packaging Options Bulk (Tray) – Short Leads 6 +0/−1 C R06 Bulk (Bag) – Max Length Leads 30 +5/−0 A R30

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 014_PME271E_X1_300 • 5/19/2016 Film Capacitors AC Line EMI Suppression and RC Networks – PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Dimensions – Millimeters L B FRONT VIEW SIDE VIEW H LL p d Size Code p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance SJ 22.5 +/−0.4 8 Maximum 17 Maximum 27 Maximum 0.8 +/−0.05 SP 22.5 +/−0.4 10 Maximum 19 Maximum 27 Maximum 0.8 +/−0.05 SU 22.5 +/−0.4 12 Maximum 22 Maximum 27 Maximum 0.8 +/−0.05 Note: See Ordering Options Table for lead length (LL) options.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 014_PME271E_X1_300 • 5/19/2016 Film Capacitors AC Line EMI Suppression and RC Networks – PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Performance Characteristics Rated Voltage 300 VAC 50/60 Hz Capacitance Range 0.01 – 0.22 µF Capacitance Tolerance ±20% for C 0.1 µF, ±10% for C 0.1 µF Temperature Range −40ºC to +110°C Climatic Category 40/110/56/B Approvals ENEC, UL Dissipation Factor Maximum Values at +23°C 1 kHz 1.3% Test Voltage Between Terminals The 100% screening factory test is carried out at 2,150 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. It is not permitted to repeat this test as there is a risk to damage the capacitor. KEMET is not liable in such case for any failures. Insulation Resistance Minimum Values Between Terminals C ≤ 0.33 µF ≥ 12,000 MΩ C 0.33 µF ≥ 4,000 MΩ µF In DC Applications Recommended voltage 630 VDC Environmental Test Data Test IEC Publication Procedure Endurance IEC 60384–14 1.25 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 second, 1,000 hours at upper rated temperature Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s 2 Bump IEC 60068–2–29 Test Eb 1,000 bumps at 390 m/s 2 Change of Temperature IEC 60068–2–14 Test Na Upper and lower rated temperature 5 cycles Active Flammability IEC 60384–14 VR + 20 surge pulses at 2.5 kV (pulse every 5 seconds) P assive Flammability IEC 60384–14 IEC 60384–1, IEC 60695–11–5 Needle-flame test Damp Heat Steady State IEC 60068–2–78 Test Cab +40°C and 93% RH, days

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 014_PME271E_X1_300 • 5/19/2016 Film Capacitors AC Line EMI Suppression and RC Networks – PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Approvals Mark Specification File Number EN/IEC 60384–14 SE/0140–15D UL 60384-14 CAN/CSA-E60384-14-09 E73869 Environmental Compliance All KEMET EMI capacitors are RoHS Compliant. Table 1 – Ratings & Part Number Reference Capacitance Value (µF) Maximum Dimensions in mm Lead Spacing (p) fo (MHz) dV/dt (V/µs) New KEMET Part Number Legacy Part NumberB H L 0.033 7.3 13 18.5 15.2 7 1200 P277QN333M300(1) PME271E533M(1) 0.068 7.6 14 24 20.3 5.2 600 P277CE683M300(1) PME271E568M(1) 0.068 8 17 27 22.5 4.7 600 P277SJ683M300(1) PME271ED5680M(1) 0.1 8 17 27 22.5 4.1 600 P277SJ104M300(1) PME271ED6100M(1) 0.15 10 19 27 22.5 3.2 600 P277SP154K300(1) PME271ED6150K(1) 0.22 12 22 27 22.5 2.5 600 P277SU224K300(1) PME271ED6220K(1) Capacitance Value (µF) B (mm) H (mm) L (mm) Lead Spacing (p) fo (MHz) dV/dt (V/µs) New KEMET Part Number Legacy Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 014_PME271E_X1_300 • 5/19/2016 Film Capacitors AC Line EMI Suppression and RC Networks – PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Manual Soldering Recommendations Following is the recommendation for manual soldering with a soldering iron. The soldering iron tip temperature should be set at 350°C (+10°C maximum) with the soldering duration not to exceed more than 3 seconds. Recommended Soldering Temperature 100 150 200 250 300 350 400 0 1 2 3 4 5 6 7 8 Soldering time (sec) Soldering iron bit temperature (deg C) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 221ºC for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropyle ne capacitors are especially sensitive to heat (the melting point of polypropylene is 160 170ºC). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during sol dering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the recommended limits may result to degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through- hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Wave Soldering Recommendations 100 150 200 250 300 0 40 80 120 160 200 240 Temperature (°C) Time (s) ca 2°C/s ca 3.5°C/s typical ca 5°C/s Cooling 2+3s max 115°C max Tpreheat ΔT <150°C 100°C Preheating Typical First wave Second wave 260°C

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 014_PME271E_X1_300 • 5/19/2016 Film Capacitors AC Line EMI Suppression and RC Networks – PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Soldering Process cont'd Wave Soldering Recommendations cont'd 1. The table indicates the maximum set-up temperature of the soldering process Figure 1 Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Pitch mm Capacitor Pitch = 15 mm Capacitor Pitch mm Capacitor Pitch mm Capacitor Pitch mm Polyester 130°C 130°C 130°C 270°C 270°C Polypropylene 100°C 110°C 130°C 260°C 270°C Paper 130°C 130°C 140°C 270°C 270°C Polyphenylene Sulphide 150°C 150°C 160°C 270°C 270°C 2. The maximum temperature measured inside the capacitor: S et the temperature so that inside the element the maximum temperature is below the limit: Dielectric Film Material Maximum temperature measured inside the element Polyester 160°C Polypropylene 110°C Paper 160°C Polyphenylene Sulphide 160°C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however , instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 014_PME271E_X1_300 • 5/19/2016 Film Capacitors AC Line EMI Suppression and RC Networks – PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Construction Detailed Cross Section Self-Extinguishing Resin Self-Extinguishing Resin LeadsMetal Contact Layer Metal Contact Layer Margin Metallized Impregnated Paper (First Layer) Margin Margin Metallized Impregnated Paper (Second Layer) Metal Spraying Material Impregnated Paper Metallization Single Design — Multilayer Impregnated Paper Dielectric

1 Section

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 014_PME271E_X1_300 • 5/19/2016 Film Capacitors AC Line EMI Suppression and RC Networks – PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Marking BACKFRONT TOP Capacitance Safety Class Voltage Approval Mark Series IEC Climatic Category Approval Mark Manufacturing Date Code Self Healing Packaging Quantities Lead Spacing (mm) Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel ø 360 mm Large Reel ø 500 mm 15.2 5.5 12.5 18 1000 500 600 6.5 12.5 18 600 400 400 7.5 14.5 18 600 400 400 8.5 16 18 400 250 400 5.2 10.5 18.5 1000 500 600 5.5 11 18.5 1000 500 500 6 12.5 18.5 600 400 400 7.3 13 18.5 600 400 400 800 7.8 13.5 18.5 600 400 400 8.5 14.3 18.5 500 300 350 20.3 7.6 14 24 1500 250 250 500 8.4 14 24 1200 200 250 500 9 15 24 1500 200 250 11.3 16.5 24 1000 150 180 400 22.5 8 17 27 1200 200 10 19 27 1000 150 200 12 22 27 800 100 180 350 25.4 10.6 16.1 30.5 1000 150 10.5 17.3 30.5 1000 100 12.1 19 30.5 800 100 15.3 22 30.5 600 75

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 014_PME271E_X1_300 • 5/19/2016 Film Capacitors AC Line EMI Suppression and RC Networks – PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Lead Taping & Packaging (IEC 60286–2) Taping Specifi cation Dimensions in mm Standard IEC 60286–2 Lead spacing +6/-0.1 F Formed Carrier tape width +/-0.5 W 18 18 18 18 18 18+1/-0.5 Hold-down tape width +/-0.3 W 0 9 12 12 12 12 Position of sprocket hole +/-0.5 W 1 9 9 9 9 9 9+0.75/-0.5 Distance between tapes Maximum W2 3 3 3 3 3 3 Sprocket hole diameter +/-0.2 D0 4 4 4 4 4 4 Feed hole lead spacing +/-0.3 P0 Lateral deviation Maximum ∆h 2 2 2 2 2 2 Sprocket hole/cap body Nominal H0 Sprocket hole/top of cap body Maximum H1 (3) 35 35 35 35 58 58MAX (1) Maximum cumulative feed hole error, 1 mm per 20 parts. (2) 16.5 mm available on request. (3) Depending on case size. (4) 15 mm available on request. Lead Spacing 10.2 – 15.2 mm Lead Spacing 20.3 – 22.5 mm Formed Leads from 10.2 to 7.5 mm

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 014_PME271E_X1_300 • 5/19/2016 Film Capacitors AC Line EMI Suppression and RC Networks – PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC H T W Lead Taping & Packaging (IEC 60286–2) cont'd Ammo Specifi cations Series Dimensions (mm) H W T R4x, R4x+R, R7x, RSB 360 340 59F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx 330 330 50 Reel Specifi cations Series Dimensions (mm) D H W R4x, R4x+R, R7x, RSB 355 500 25 55 (Max)F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx 360 500 30 46 (Max) Manufacturing Date Code (IEC–60062) Y = Year, Z = Month Year Code Month Code

2000 M January 1

2001 N February 2

2002 P March 3

2003 R April 4

2004 S May 5

2005 T June 6

2006 U July 7

2007 V August 8

2008 W September 9

2009 X October O

2010 A November N

2011 B December D

D W H

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 014_PME271E_X1_300 • 5/19/2016 Film Capacitors AC Line EMI Suppression and RC Networks – PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC KEMET Corporation World Headquarters

2835 KEMET Way

Simpsonville, SC 29681 Mailing Address: P.O. Box 5928 Greenville, SC 29606 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Corporate Offi ces Fort Lauderdale, FL Tel: 954-766-2800 North America Northeast Wilmington, MA Tel: 978-658-1663 Southeast Lake Mary, FL Tel: 407-855-8886 Central Novi, MI Tel: 248-994-1030 Irving, TX Tel: 972-915-6041 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Europe Southern Europe Sasso Marconi, Italy Tel: 39-051-939111 Skopje, Macedonia Tel: 389-2-55-14-623 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Kamen, Germany Tel: 49-2307-438110 Northern Europe Wyboston, United Kingdom Tel: 44-1480-273082 Espoo, Finland Tel: 358-9-5406-5000 Asia Northeast Asia Hong Kong Tel: 852-2305-1168 Shenzhen, China Tel: 86-755-2518-1306 Beijing, China Tel: 86-10-5877-1075 Shanghai, China Tel: 86-21-6447-0707 Seoul, South Korea Tel: 82-2-6294-0550 Taipei, Taiwan Tel: 886-2-27528585 Southeast Asia Singapore Tel: 65-6701-8033 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3 014_PME271E_X1_300 • 5/19/2016 Film Capacitors AC Line EMI Suppression and RC Networks – PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required.