P26-3H3-E250

P26 FERROXCUBE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

2008 Sep 01 993

P cores and accessories P26/16 CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.400 mm −1 Ve effective volume 3530 mm 3 Ie effective length 37.6 mm Ae effective area 93.9 mm 2 Amin minimum area 77.4 mm 2 m mass of set ≈20 g CBW425 3.8 ±0.611.5 0 −0.4 21.2 +0.8 25.5 ±0.5 18 ±0.4 ∅5.4 M2.6 11 +0.4 16.1 ±0.2 0.5 +0.2 2.9 ±0.15 Fig.1 P26/16 core set. Dimensions in mm. Core sets for filter applications Clamping force for AL measurements, 200 ±50 N. GRADE AL (nH) µe TOTAL AIR GAP (µm) TYPE NUMBER (WITH NUT) TYPE NUMBER (WITHOUT NUT) 3D3 100 ±3% ≈ 32 ≈ 1630 P26/16-3D3-E100/N P26/16-3D3-E100 160 ±3% ≈ 51 ≈ 890 P26/16-3D3-E160/N P26/16-3D3-E160 250 ±3% ≈ 80 ≈ 510 P26/16-3D3-E250/N P26/16-3D3-E250 2150 ±25% ≈ 685 ≈ 0 − P26/16-3D3 3H3 160 ±3% ≈ 51 ≈ 940 P26/16-3H3-E160/N P26/16-3H3-E160 250 ±3% ≈ 80 ≈ 550 P26/16-3H3-E250/N P26/16-3H3-E250 315 ±3% ≈ 100 ≈ 420 P26/16-3H3-E315/N P26/16-3H3-E315 400 ±3% ≈ 127 ≈ 310 P26/16-3H3-E400/N P26/16-3H3-E400 630 ±3% ≈ 201 ≈ 180 P26/16-3H3-A630/N P26/16-3H3-A630 5000 ±25% ≈ 1590 ≈ 0 − P26/16-3H3

2008 Sep 01 994

P cores and accessories P26/16 Core sets for general purpose transformers and power applications Clamping force for AL measurements, 200 ±50 N. Core sets of high permeability grades Clamping force for AL measurements, 200 ± 50 N. Properties of core sets under power conditions Note 1. Measured at 60 °C. GRADE AL (nH) µe AIR GAP (µm) TYPE NUMBER 3C81 160 ±3% ≈ 51 ≈ 950 P26/16-3C81-E160 250 ±3% ≈ 80 ≈ 560 P26/16-3C81-A250 315 ±3% ≈ 100 ≈ 420 P26/16-3C81-A315 400 ±3% ≈ 127 ≈ 320 P26/16-3C81-A400 630 ±3% ≈ 200 ≈ 190 P26/16-3C81-A630 6700 ±25% ≈ 2130 ≈ 0 P26/16-3C81 3C91 6700 ±25% ≈ 2130 ≈ 0 P26/16-3C91 3F3 160 ±3% ≈ 51 ≈ 950 P26/16-3F3-E160 250 ±3% ≈ 80 ≈ 560 P26/16-3F3-A250 315 ±3% ≈ 100 ≈ 420 P26/16-3F3-A315 400 ±3% ≈ 127 ≈ 320 P26/16-3F3-A400 630 ±3% ≈ 200 ≈ 190 P26/16-3F3-A630 4600 ±25% ≈ 1470 ≈ 0 P26/16-3F3 GRADE AL (nH) µe AIR GAP (µm) TYPE NUMBER 3E27 12000 ±25% ≈ 3820 ≈ 0 P26/16-3E27 GRADE B( m T )a t C O R EL O S S( W )a t H=2 5 0A / m ; f = 25 kHz; T = 100 °C f = 25 kHz; =2 0 0m T ; T = 100 °C f=1 0 0k H z ; =1 0 0m T ; T=1 0 0 °C f=1 0 0k H z ; = 200 mT; T = 100 °C f = 400 kHz; =5 0m T ; T = 100 °C Bˆ Bˆ Bˆ Bˆ

2008 Sep 01 995

P cores and accessories P26/16 INDUCTANCE ADJUSTERS General data PARAMETER SPECIFICATION Material of head and thread polypropylene (PP), glass fibre reinforced Maximum operating temperature 125 °C handbook, halfpage MBE210 12.2 4.45 M 2.6 5.65O 0.2 4.7 min Fig.2 P26/16 inductance adjuster. Dimensions in mm. Inductance adjuster selection chart (applies to all types) Note 1. Maximum adjustment range. GRADE AL (nH) TYPES FOR LOW ADJUSTMENT ∆L/L(1) TYPES FOR MEDIUM ADJUSTMENT ∆L/L(1) TYPES FOR HIGH ADJUSTMENT ∆L/L(1) 3H3 63 −− −− ADJ-P26-RED 25 100 −− −− ADJ-P26-RED 22 160 −− ADJ-P26-RED 15 −−

250 ADJ-P26-RED 10 −− ADJ-P26-BROWN 23

315 ADJ-P26-RED 8 −− ADJ-P26-BROWN 18

400 ADJ-P26-RED 6 ADJ-P26-BROWN 13 ADJ-P26-GREY 25

630 ADJ-P26-BROWN 8 ADJ-P26-GREY 16 −−

1000 ADJ-P26-BROWN 5 ADJ-P26-GREY 9 −−

1600 −− ADJ-P26-GREY 5 −− 3D3 100 −− −− ADJ-P26-RED 21 160 −− ADJ-P26-RED 14 −−

250 ADJ-P26-RED 9 −− ADJ-P26-GREY 35

400 − 8 ADJ-P26-GREY 17 −−

2008 Sep 01 996

P cores and accessories P26/16 COIL FORMERS General data for CP-P26/16 coil former Winding data and area product for CP-P26/16 coil former PARAMETER SPECIFICATION Coil former material polybutyleneterephtalate (PBT), glass reinforced, flame retardant in accordance with “UL 94V-0”; UL file number E45329 (R) Maximum operating temperature 155 °C, “IEC 60085”, class F NUMBER OF SECTIONS WINDING AREA (mm2) MINIMUM WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 37.1 9.3 52.6 3480 CP-P26/16-1S 22 × 17.5 2 × 4.35 52.6 2 x 1640 CP-P26/16-2S 33 × 11 3 × 2.7 52.6 3 x 1030 CP-P26/16-3S handbook, full pagewidth MBE211 12.8 0 0.152.7 11.7 0.15 20.9 0 0.2 0.6 0.5 0.5 0.4 10.8 0 0.15 Fig.3 Coil former CP-P26/16. Dimensions in mm.

2008 Sep 01 997

P cores and accessories P26/16 General data 6-pins P26/16 coil former for PCB mounting Winding data and area product for 6-pins P26/16 coil former for PCB mounting Note 1. In accordance with “UL 94-HB”. PARAMETER SPECIFICATION Coil former material polyamide (P A6.6), glass reinforced, flame retardant in accordance with “UL 94V-0”; UL file number E41938(M) Maximum operating temperature 130 °C, “IEC 60085”, class B Pin material copper-zinc alloy (CuZn), tin (Sn) plated Resistance to soldering heat “IEC 60068-2-20”, Part 2, Test Tb, method 1B, 350 °C, 3.5 s Solderability “IEC 60068-2-20”, Part 2, Test Ta, method 1, 235 °C, 2 s NUMBER OF SECTIONS MINIMUM WINDING AREA (mm2) NOMINAL WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) MINIMUM LENGTH OF PINS (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 36.7 9.7 52.7 4.4 3450 CPV-P26/16-1S-6PD 1 36.7 9.7 52.7 6.8 3450 CPV-P26/16-1S-6PDL 22 × 16.6 2 × 4.5 52.7 4.4 2 x 1560 CPV-P26/16-2S-6PD 22 × 16.6 2 × 4.5 52.7 6.8 2 x 1560 CPV-P26/16-2S-6PDL 33 × 10.3 3 × 2.8 52.7 4.4 3 x 967 CPV-P26/16-3S-6PD (1) 33 × 10.3 3 × 2.8 52.7 6.8 3 x 967 CPV-P26/16-3S-6PDL (1) handbook, full pagewidth MGB62612.25 max 0.75 10.8 max 9.7 28.5 12.7 2.4 4.35 min10.3 max 7.1 11.65 min 21.05 max 31.45 max 2.8 Fig.4 P26/16 coil former for PCB mounting; 6-pins. Dimensions in mm.

2008 Sep 01 998

P cores and accessories P26/16 MOUNTING PARTS General data ITEM REMARKS FIGURE TYPE NUMBER Tag plate material: phenolformaldehyde (PF), glass reinforced 5 TGP-P26/16-C flame retardant: in accordance with “UL 94V-0”; UL file number E41429 maximum operating temperature: 180 °C, “IEC 60085”, class H pins: copper-tin alloy (CuSn), tin (Sn) plated resistance to soldering heat in accordance with “IEC 60068-2-20”, Part 2, Test Tb, method 1B: 350 °C, 3.5 s solderability in accordance with “IEC 60068-2-20”, Part 2, Test Ta, method 1: 235°C, 2 s Container copper-zinc alloy, tin (Sn) plated 6 CON-P26/16 earth pins: presoldered Spring CrNi-steel 7 SPR-P26/16 spring force: ≈200 N when mounted Clamp spring steel, tin-plated 8 CLM/TP-P26/16 handbook, full pagewidth CBW273 5.0815.24 10.16 15.24 27.8 max. 1.5 2.1 ∅0.8 4.5 6.5 2.54 mark 1.3 +0.15 Fig.5 Tag plate: TGP-P26/16-C. Dimensions in mm.

2008 Sep 01 999

P cores and accessories P26/16 handbook, full pagewidth CBW426 mark 8 18.4 max. 27.7 max. 23.55 min. 8.2 0.6 Fig.6 P26/16 container. Dimensions in mm. Fig.7 P26/16 spring. Dimensions in mm. handbook, halfpage MBE216 25.3 max 1.4 0.3

2008 Sep 01 1000

P cores and accessories P26/16 handbook, halfpage MBE682 25.4 16.6 8.6 21.1 25.4 4.8 Fig.8 Clamp: CLM/TP-P26/16. Dimensions in mm.