DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

SIDACtor® Protection Thyristors 148 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Baseband Protection (Voice-DS1) SIDACtor® Balanced Series - MS-013

Electrical Characteristics

@lDRM=5μA VS @100V/μs VDRM @lDRM=5μA VS @100V/μs VT IS IT IH CapacitanceV min V max V min V max V max mA max A max mA min Pins 1 & 6-3, 1 & 6-4 Pins 3-4 P1553UALxx P1553UA 130 180 130 180 8 800 2.2 150 See Capacitance Values table P1803UALxx P1803UA 150 210 150 210 8 800 2.2 150 P2103UALxx P2103UA 170 250 170 250 8 800 2.2 150 P2353UALxx P2353UA 200 270 200 270 8 800 2.2 150 P2703UALxx P2703UA 230 300 230 300 8 800 2.2 150 P3203UALxx P3203UA 270 350 270 350 8 800 2.2 150 P3403UALxx P3403UA 300 400 300 400 8 800 2.2 150 P5103UALxx P5103UA 420 600 420 600 8 800 2.2 150 The SIDACtor® Balanced Series MS-013 are designed to protect baseband equipment from overvoltage transients. 5IFQBUFOUFEi:wDPOmHVSBUJPOFOTVSFTCBMBODFE overvoltage protection. The series provides a single port surface mount solution that enables voice through DS-1 equipment to comply with various global requlatory standards.

Description

Features and Benefits t Balanced overvoltage protection t Low voltage overshoot t Low on-state voltage t Does not degrade with use t Fails short circuit when surged in excess of ratings t Replaces three discrete devices t Meets UL/IEC 60950-1 creepage and clearance Agency Approvals Agency Agency File Number E133083 Schematic Symbol Pinout Designation Notes: - Absolute maximum ratings measured at TA $ VOMFTTPUIFSXJTFOPUFE - Devices are bi-directional. - XX = Part Number Suffix: ‘TP’ (Tube Pack) or ‘RP’ (Reel Pack). Applicable Global Standards t TIA-968-A t TIA-968-B t ITU K.20/21 Enhanced Level t ITU K.20/21 Basic Level t GR 1089 Inter-building t GR 1089 Intra-building t IEC 61000-4-5 t YD/T 1082 t YD/T 993 t YD/T 950 T able continues on next page.

SIDACtor® Protection Thyristors 149 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Baseband Protection (Voice-DS1) Part Number Pin 3-4 Tip-Ring Pins 1 & 6-3, 1 & 6-4 Tip-Ground, Ring-Ground pF min pF max pF min pF max P1553UALxx 20 95 10 60 P1803UALxx 20 85 10 55 P2103UALxx 15 85 10 55 P2353UALxx 15 75 10 50 P2703UALxx 15 75 10 50 P3203UALxx 15 70 10 45 P3403UALxx 15 65 10 45 P5103UALxx 10 60 10 40 P1553UBLxx 25 95 15 60 P1803UBLxx 25 85 15 55 P2103UBLxx 20 85 15 55 P2353UBLxx 20 75 15 50 P2703UBLxx 20 75 10 50 P3203UBLxx 20 70 10 45 P3403UBLxx 15 65 10 45 P5103UBLxx 15 60 10 40 P1553UCLxx 30 95 20 60 P1803UCLxx 30 85 15 55 P2103UCLxx 30 85 15 55 P2353UCLxx 25 75 15 50 P2703UCLxx 25 75 15 50 P3203UCLxx 25 70 15 45 P3403UCLxx 20 65 15 45 P5103UCLxx 20 60 10 40 Capacitance Values Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias. Electrical Characteristics (continued) Part Number Part Marking VDRM @lDRM=5μA VS @100V/μs VDRM @lDRM=5μA VS @100V/μs VT IS IT IH CapacitanceV min V max V min V max V max mA max A max mA min Pins 1 & 6-3, 1 & 6-4 Pins 3-4 P1553UBLxx P1553UB 130 180 130 180 8 800 2.2 150 See Capacitance Values table P1803UBLxx P1803UB 150 210 150 210 8 800 2.2 150 P2103UBLxx P2103UB 170 250 170 250 8 800 2.2 150 P2353UBLxx P2353UB 200 270 200 270 8 800 2.2 150 P2703UBLxx P2703UB 230 300 230 300 8 800 2.2 150 P3203UBLxx P3203UB 270 350 270 350 8 800 2.2 150 P3403UBLxx P3403UB 300 400 300 400 8 800 2.2 150 P5103UBLxx P5103UB 420 600 420 600 8 800 2.2 150 P1553UCLxx P1553UC 130 180 130 180 8 800 2.2 150 P1803UCLxx P1803UC 150 210 150 210 8 800 2.2 150 P2103UCLxx P2103UC 170 250 170 250 8 800 2.2 150 P2353UCLxx P2353UC 200 270 200 270 8 800 2.2 150 P2703UCLxx P2703UC 230 300 230 300 8 800 2.2 150 P3203UCLxx P3203UC 270 350 270 350 8 800 2.2 150 P3403UCLxx P3403UC 300 400 300 400 8 800 2.2 150 P5103UCLxx P5103UC 420 600 420 600 8 800 2.2 150

SIDACtor® Protection Thyristors 150 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Baseband Protection (Voice-DS1) -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C Percent of VS Change – % 25 °C 25°C Case Temperature (TC) - ºC 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 Ratio of IH IH (TC = 25ºC) Normalized VS Change vs. Junction T emperature Normalized DC Holding Current vs. Case T emperature IH IT IS IDRM VDRMVT +V-V VS 100 tr td Peak Value Half Value t – Time (μs) IPP – Peak Pulse Current – %I PP tr = rise time to peak value td = decay time to half value Waveform = t r x td V-I Characteristics tr x td Pulse Waveform Package Symbol Parameter Value Unit Modified MS-013 TJ Operating Junction Temperature Range UP TS Storage Temperature Range UP R0JA Thermal Resistance: Junction to Ambient 60 °C/W Thermal Considerations Surge RatingsSeries IPP ITSM 50/60 Hz di/dt0.2x310 1 0.5x700 2 2x10 1 2x10 2 8x20 1 1.2x50 2 10x160 1 10x160 2 10x560 1 10x560 2 5x320 1 9x720 2 10x360 1 10x360 2 10x1000 1 10x1000 2 5x310 1 10x700 2 A min A min A min A min A min A min A min A min A min A min A/ μs max A 2 01 5 0 1 5 09 0 5 07 57 5 4 5 7 52 0 5 0 0 B 25 250 250 150 100 100 125 80 100 25 500 C 50 500 400 200 150 200 175 100 200 50 500 - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPGUP - The device must initially be in thermal equilibrium with -40°C < TJ < Notes:

1 Current waveform in μs

2 Voltage waveform in μs

SIDACtor® Protection Thyristors 151 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Baseband Protection (Voice-DS1) Part Numbering P x L xxxxx3 U CONSTRUCTION VARIABLE PACKING OPTIONS PACKAGE TYPE RoHS COMPLIANT TYPE MEDIAN VOLTAGE IPP RATING P: SIDACtor RP: Reel Pack TP: Tube Pack Packing Options Package Type Description Quantity Added Suffix Industry Standard U Modified MS-013 6-pin Tape and Reel Pack

1500 RP EIA-481-D

Modified MS-013 6-pin Tube Pack 500 (50 per tube) TP N/A Physical Specifications Environmental Specifications Lead Material Copper Alloy T erminal Finish 100% Matte-Tin Plated Body Material UL recognized epoxy meeting flammability classification 94V-0 High T emp Voltage Blocking 80% Rated VDRM (VAC Peak ¡$PS 504 or 1008 hrs. MIL -STD-750 (Method 1040) JEDEC, JESD22-A-101 T emp Cycling ¡$UP NJOEXFMM VQUP cycles. MIL -STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased T emp & Humidity 52 V DC VQUPIST&*" JEDEC, JESD22-A-101 High T emp Storage ¡$IST.*-45% .FUIPE JEDEC, JESD22-A-101 Low T emp Storage -65°C, 1008 hrs. Thermal Shock ¡$UP NJOEXFMM TFDUSBOTGFS 10 cycles. MIL -STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker T est) BUN VQUPIST&*" JEDEC, JESD22-A-102 Resistance to Solder Heat TFDT.*-45% .FUIPE Moisture Sensitivity Level IST SFnPXDZDMFT ¡$1FBL +&%&$+45% -FWFM Part Marking XXXXXXX XXXXX Part Marking Code (Refer to Electrical Characteristics Table) Date Code Time T emperature TP TL TS(max) TS(min) tP tL tS time to peak temperature (t 25ºC to peak) Ramp-down Ramp-up Preheat Critical Zone TL to TP Figure 1 Soldering Parameters Reflow Condition Pb-Free assembly (see Fig. 1) Pre Heat - Temperature Min (Ts(min)) - Temperature Max (Ts(max)) - Time (Min to Max) (ts) 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) - Temperature (tL) 60-150 secs. Peak Temp (TP) Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed

SIDACtor® Protection Thyristors 152 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Baseband Protection (Voice-DS1) Interior of the Tube .045 (1.14) .165 (4.19) .150 (3.81) 90˚ .525 (13.34) A .225 (5.72) Message Location .310 (7.87) .108 (2.74) .005 20.000 ± .030 (508.00 ± 0.76) .020 ± .005 (0.51 ± 0.13) WALL TYP. .110 (2.79) A Dimensions are in inches (and millimeters) T ape and Reel Specification — MS-013 Direction of Feed 0.700 (17 .8) .512 (13.0) Arbor Hole Dia. 12.99 (330) .630 (16.0) Dimensions are in inches (and millimeters) .472 (12.0) .157 (4.0) T ube Pack Specification — MS-013 Dimensions — MS-013 7º TYP E D A B Mold Split Line A 7º TYP 7º TYP Pad Outline 0.065 (1.65) 0.460 (11.68) 0.138 (3.50) 0.059 (1.50) C A F 7º TYP G J H Dimension are in inches (and millimeters). Burr Side MIN Length of Flat 96º Detail AKBSC* Dimensions Inches Millimeters Min Max Min Max A 0.360 0.364 9.14 9.25 B 0.352 0.356 8.94 9.04 C 0.400 0.412 10.16 10.46 D 0.043 0.045 1 .09 1 .13 E 0.047 0.055 1 .19 1 .40 F 0.293 0.297 7 .44 7 .54 G 0.289 0.293 7 .34 7 .44 H 0.089 0.093 2.26 2.36 J 0.041 0.049 1 .04 1 .24 K 0.020 0.51 BSC* 0.133 0.143 3.38 3.63 * BSC = Basic Spacing between Centers