P22

P22 FERROXCUBE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

Supersedes data of September 2004 2008 Sep 01 FERROXCUBE P22/13 P cores and accessories

2008 Sep 01 980

P cores and accessories P22/13 CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.497 mm −1 Ve effective volume 2000 mm 3 Ie effective length 31.5 mm Ae effective area 63.4 mm 2 Amin minimum area 50.9 mm 2 m mass of set ≈ 12 g handbook, halfpage MGC127 4.4 0.3 9.2 0.4 0.5 0.2 13.4 0.2 2.7 0.15 17.9 0.6 3.8 0.6 9.4 0 0.3 22 0 0.8 0.415 Fig.1 P22/13 core set. Dimensions in mm. Core sets for filter applications Clamping force for AL measurements, 140 ±30 N. GRADE AL (nH) µe TOTAL AIR GAP (µm) TYPE NUMBER (WITH NUT) TYPE NUMBER (WITHOUT NUT) 3D3 40 ±3% ≈ 16 ≈ 3360 P22/13-3D3-E40/N P22/13-3D3-E40 63 ±3% ≈ 25 ≈ 1890 P22/13-3D3-E63/N P22/13-3D3-E63 100 ±3% ≈ 40 ≈ 1040 P22/13-3D3-E100/N P22/13-3D3-E100 160 ±3% ≈ 63 ≈ 570 P22/13-3D3-E160/N P22/13-3D3-E160 1700 ±25% ≈ 670 ≈ 0 − P22/13-3D3 3H3 160 ±3% ≈ 64 ≈ 610 P22/13-3H3-E160/N P22/13-3H3-E160 250 ±3% ≈ 100 ≈ 360 P22/13-3H3-E250/N P22/13-3H3-E250 315 ±3% ≈ 125 ≈ 270 P22/13-3H3-E315/N P22/13-3H3-E315 400 ±3% ≈ 158 ≈ 210 P22/13-3H3-A400/N P22/13-3H3-A400 630 ±3% ≈ 249 ≈ 120 P22/13-3H3-A630/N P22/13-3H3-A630 3900 ±25% ≈ 1540 ≈ 0 − P22/13-3H3

2008 Sep 01 981

P cores and accessories P22/13 Core sets for general purpose transformers and power applications Clamping force for AL measurements, 140 ±30 N. Core sets of high permeability grades Clamping force for AL measurements, 140 ± 30 N. Properties of core sets under power conditions Note 1. Measured at 60 °C. GRADE AL (nH) µe AIR GAP (µm) TYPE NUMBER 3C81 160 ±3% ≈ 63 ≈ 610 P22/13-3C81-A160 250 ±3% ≈ 99 ≈ 360 P22/13-3C81-A250 315 ±3% ≈ 125 ≈ 280 P22/13-3C81-A315 400 ±3% ≈ 158 ≈ 210 P22/13-3C81-A400 630 ±3% ≈ 249 ≈ 120 P22/13-3C81-A630 5200 ±25% ≈ 2060 ≈ 0 P22/13-3C81 3C91 5200 ±25% ≈ 2060 ≈ 0 P22/13-3C91 3F3 160 ±3% ≈ 63 ≈ 610 P22/13-3F3-A160 250 ±3% ≈ 99 ≈ 360 P22/13-3F3-A250 315 ±3% ≈ 125 ≈ 280 P22/13-3F3-A315 400 ±3% ≈ 158 ≈ 210 P22/13-3F3-A400 630 ±3% ≈ 249 ≈ 120 P22/13-3F3-A630 3550 ±25% ≈ 1410 ≈ 0 P22/13-3F3 GRADE AL (nH) µe AIR GAP (µm) TYPE NUMBER 3E27 9250 ±25% ≈ 3660 ≈ 0 P22/13-3E27 GRADE B( m T )a t C O R EL O S S( W )a t H=2 5 0A / m ; f = 25 kHz; T = 100 °C f = 25 kHz; =2 0 0m T ; T = 100 °C f=1 0 0k H z ; =1 0 0m T ; T=1 0 0 °C f=1 0 0k H z ; = 200 mT; T = 100 °C f = 400 kHz; =5 0m T ; T = 100 °C Bˆ Bˆ Bˆ Bˆ

2008 Sep 01 982

P cores and accessories P22/13 INDUCTANCE ADJUSTERS General data PARAMETER SPECIFICATION Material of head and thread polypropylene (PP), glass fibre reinforced Maximum operating temperature 125 °C handbook, halfpage MGC128 10.4 3.85 M 2 4.65O 0.15 3.7 min 0.8 Fig.2 P22/13 inductance adjuster. Dimensions in mm. Inductance adjuster selection chart (applies to all types) Note 1. Maximum adjustment range. GRADE AL (nH) TYPES FOR LOW ADJUSTMENT ∆L/L (1) TYPES FOR MEDIUM ADJUSTMENT ∆L/L (1) TYPES FOR HIGH ADJUSTMENT ∆L/L (1) 3H3 100 −− ADJ-P22/RM8-RED 16 ADJ-P22/RM8-ORANGE 21

160 ADJ-P22/RM8-RED 11 ADJ-P22/RM8-ORANGE 17 ADJ-P22/RM8-WHITE 27

250 ADJ-P22/RM8-ORANGE 10 ADJ-P22/RM8-WHITE 18 −−

315 ADJ-P22/RM8-ORANGE 7 −− ADJ-P22/RM8-BROWN 22

400 ADJ-P22/RM8-WHITE 11 ADJ-P22/RM8-BROWN 17 ADJ-P22/RM8-BLACK 30

630 ADJ-P22/RM8-BROWN 10 ADJ-P22/RM8-BLACK 18 −−

1000 ADJ-P22/RM8-BROWN 6 ADJ-P22/RM8-BLACK 12 −−

1250 ADJ-P22/RM8-BROWN 4 ADJ-P22/RM8-BLACK 7 −−

3D3 40 −− −− ADJ-P22/RM8-ORANGE 27 63 −− −− ADJ-P22/RM8-ORANGE 26 100 −− ADJ-P22/RM8-RED 16 ADJ-P22/RM8-ORANGE 23

160 ADJ-P22/RM8-RED 10 ADJ-P22/RM8-ORANGE 15 −−

2008 Sep 01 983

P cores and accessories P22/13 COIL FORMERS General data CP-P22/13 coil former PARAMETER SPECIFICATION Coil former material polybutyleneterephtalate (PBT), glass reinforced, flame retardant in accordance with “UL 94V-0”; UL file number E45329 (R) Maximum operating temperature 155 °C, “IEC 60085”, class F Winding data and area product for CP-P22/13 coil former NUMBER OF SECTIONS MINIMUM WINDING AREA (mm2) NOMINAL WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 26.2 7.5 44.5 1660 CP-P22/13-1S 22 × 12.2 2 × 3.45 44.5 2 x 773 CP-P22/13-2S 33 × 7.6 3 × 2.1 44.5 3 x 482 CP-P22/13-3S handbook, full pagewidth CBW603 2.7 0.6 0.5 0.5 0.4 9.6 +0.15 17.8 0 −0.2 9.0 0 −0.15 10.7 0 −0.15 Fig.3 Coil former: CP-P22/13. Dimensions in mm.

2008 Sep 01 984

P cores and accessories P22/13 General data 6-pins P22/13 coil former for PCB mounting Winding data and area product for 6-pins P22/13 coil former for PCB mounting Note 1. In accordance with “UL 94-HB”. PARAMETER SPECIFICATION Coil former material polyamide (P A6.6), glass reinforced, flame retardant in accordance with “UL 94V-0”; UL file number E41938(M) Maximum operating temperature 130 °C, “IEC 60085”, class B Pin material copper-zinc alloy (CuZn), tin (Sn) plated Resistance to soldering heat “IEC 60068-2-20”, Part 2, Test Tb, method 1B, 350 °C, 3.5 s Solderability “IEC 60068-2-20”, Part 2, Test Ta, method 1, 235 °C, 2 s NUMBER OF SECTIONS MINIMUM WINDING AREA (mm NOMINAL WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) MINIMUM LENGTH OF PINS (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 25.2 7.8 44.5 4.4 1600 CPV-P22/13-1S-6PD 1 25.2 7.8 44.5 6.8 1600 CPV-P22/13-1S-6PDL 22 × 11.7 2 × 3.6 44.5 4.4 2 x 742 CPV-P22/13-2S-6PD 22 × 11.7 2 × 3.6 44.5 6.8 2 x 742 CPV-P22/13-2S-6PDL 33 × 7.03 3 × 2.2 44.5 4.4 3 x446 CPV-P22/13-3S-6PD (1) 33 × 7.03 3 × 2.2 44.5 6.8 3 x 446 CPV-P22/13-3S-6PDL (1) handbook, full pagewidth MGB62410.4 max 9 max 7.8 25 10.6 2.4 10.4 max 9.5 min 17.85 max 27.9 max 2.25 0.75 7.1 4.35 min Fig.4 P22/13 coil former for PCB mounting; 6-pins. Dimensions in mm.

2008 Sep 01 985

P cores and accessories P22/13 MOUNTING PARTS General data and ordering information ITEM REMARKS FIGURE TYPE NUMBER Tag plate material: phenolformaldehyde (PF), glass reinforced 5 TGP-P22/13-C flame retardant: in accordance with “UL 94V-0”; UL file number E41429 maximum operating temperature: 180 °C, “IEC 60085”, class H pins: copper-tin alloy (CuSn), tin (Sn) plated resistance to soldering heat in accordance with “IEC 60068-2-20”, Part 2, Test Tb, method 1B: 350 °C, 3.5 s solderability in accordance with “IEC 60068-2-20”, Part 2, Test Ta, method 1: 235°C, 2 s Container copper-zinc alloy (CuZn), tin (Sn) plated 6 CON-P22/13 earth pins: presoldered Spring CrNi-steel 7 SPR-P22/13 spring force: ≈140 N when mounted Clamp spring steel, tin-plated 8 CLM/TS-P22/13 Washer phenolformaldehyde (PF) 9 WAS-CLM/TS-P22/13 2.1 1.5 10.16 5.08 5.0810.16 mark 23.2 max. 4.5 ∅5.8 ∅0.8 2.54 CBW604 1.3 0.15 Fig.5 Tag plate: TGP-P22/13-C. Dimensions in mm.

2008 Sep 01 986

P cores and accessories P22/13 andbook, full pagewidth CBW424 8 15.6 max. 5 1 8.2 20.2 min. 23.3 max. 0.6 mark Fig.6 Container: CON-P22/13. Dimensions in mm. handbook, halfpage MGC132 20.5 max 1.4 0.3 Fig.7 Spring: SPR-P22/13. Dimensions in mm.

2008 Sep 01 987

P cores and accessories P22/13 handbook, halfpage MBE672 15.1 3.2 9.5 13.5 14 20 Fig.8 Clamp: CLM/S-P22/13. Dimensions in mm. handbook, halfpage 8.2 MBG175 0.25 Fig.9 Washer: WAS-CLM/TS-P22/13. Dimensions in mm.

2008 Sep 01 988

P cores and accessories P22/13 DATA SHEET STATUS DEFINITIONS DISCLAIMER Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains prelimin ary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability.