P2011

P2011 NKK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Internationally Approved Toggles Series P Distinctive Characteristics International certifications from UL, CSA, VDE, SEMKO, and SEV. High torque bushing construction prevents rotation or separation from frame during installation. Stainless steel frame resists corrosion and increases environmental safety. Case/base of heat resistant resin meets UL94V-0 flammability standard. Contacts of special silver alloy resist arcing and guarantee stable electrical contact and long life. High insulating barriers increase isolation of circuits in double pole devices and provide added protection to contact points. Prominent external insulating barriers increase insulation resistance and dielectric strength. Epoxy sealed terminals prevent entry of flux, solvents, and other contaminants. Clinching of the frame to the case well above the base and terminals provides 4,000V dielectric strength. Actual Size

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Internationally Approved Toggles Series P General Specifications Electrical Capacity Resistive Load: 10A @ 125V AC or 6A @ 250V AC Motor Load: 400W @ 125V AC Lamp Load: 2A @ 125V AC for On-Off-On circuit & 3A @ 125V AC for other circuits Other Ratings Contact Resistance: 10 milliohms maximum Insulation Resistance: 1,000 megohms minimum @ 500V DC Dielectric Strength: 2,000V AC minimum between contacts for 1 minute minimum; 4,000V AC minimum between contacts & case for 1 minute minimum Mechanical Life: 100,000 operations minimum Electrical Life: 25,000 operations minimum Angle of Throw: 25° Materials & Finishes Toggle Cap: Brass with nickel plating Lever: Brass with chrome plating Bushing: Brass with nickel plating Frame: Stainless steel Case/Base: Diallyl phthalate resin (UL94V-0) Movable Contacts: Silver alloy with silver plating Stationary Contacts: Pure silver with silver plating Terminals: Copper with silver plating Environmental Data Operating Temp Range: –10°C through +85°C (+14°F through +185°F) Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Installation Soldering Time & Temp: Wave Soldering Recommended (Straight PC): See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Standards & Certifications Flammability Standards: UL94V-0 rated case/base UL Recognized: All models recognized at 10A @ 125V AC & 6A @ 250V AC; UL File No. WOYR2.E44145. Add “/U” to end of part number to order UL mark on switch. C-UL Recognized: All models recognized at 10A @ 125V AC & 6A @ 250V AC; C-UL File No. WOYR8.E44145. Add “/C-UL” to end of part number to order C-UL mark on switch. CSA Certified: All models certified at 10A @ 125V AC & 6A @ 250V AC; CSA File No. 023535-0-000. Add “/C” to end of part number to order CSA mark on switch. VDE Approved: All models approved at 10A @ 125V AC & 6A @ 250V AC; License No. 119174. Marking on switch is standard. SEMKO Approved: P2011, P2012, P2013, P2021, P2022 models approved at 10A @ 125V AC & 6A @ 125/250V AC; Reference No. 9915205/01-02. Marking on switch is standard. SEV Approved: All models with Quick Connect Terminals approved at 10A @ 125V AC & 6A @ 125/250V AC; (P2013 for micro-switch only); Authorization No. 02.0466. Marking on switch is standard. VD E R

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Internationally Approved Toggles Series P TERMINALS No Code Solder Lug P Straight PC Z .187” (4.75mm) Quick Connect TYPICAL SWITCH ORDERING EXAMPLE P20 DPDT ON-NONE-ON Circuit POLES & CIRCUITS

11 SPST ON NONE OFF

12 SPDT ON NONE ON

13 SPDT ON OFF ON

21 DPST ON NONE OFF

22 DPDT ON NONE ON

23 DPDT ON OFF ON

TOGGLES & BUSHINGS No Code .512” (13.0mm) White Cap with 6mm Bushing E .450” (11.4mm) Flatted with 6mm Bushing B .689” (17.5mm) Large Bat with 12mm Bushing D .748” (19.0mm) White Capped Column with 12mm Bushing DESCRIPTION FOR TYPICAL ORDERING EXAMPLE P2022B B .689” (17.5mm) Large Bat with 12mm Bushing Solder Lug Terminals Toggle Position Connected Terminals Throw & Schematics Pole Model Down Center Up Down Center Up Note: Terminal numbers are on the switch. SP P2011 ON NONE OFF 1-1b OPEN OPEN SPST SP P2012 P2013 ON ON NONE OFF ON ON 1-1b OPEN 1-1a SPDT DP P2021 ON NONE OFF 1-1b 2-2b OPEN OPEN DPST DP P2022 P2023 ON ON NONE OFF ON ON 1-1b 2-2b OPEN 1-1a 2-2a DPDT POLES & CIRCUITS 1 (COM) 1 (COM) 1b1a 1 2(COM) 1b 2b 1b 2b 2(COM) 1a 2a Keyway Keyway IMPORTANT: VDE, SEMKO & SEV are marked on approved models. Switches are supplied without UL, C-UL & CSA marking unless specified. Specific models & ratings noted on General Specifications page.

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Internationally Approved Toggles Series P (6.35) .250 (1.3) Dia .051 (4.75) .187 (9.0) .354 Thk = (0.8) .031 Epoxy Seal (4.5) .177(2.6) .102 (1.25) .049 (2.0) .079 Thk = (1.0) .039 (7.6) .299 (1.17) .046 Thk = (1.0) .039 Epoxy Seal (4.8) .189 TOGGLES & BUSHINGS E Panel Thickness with Keyway .134” (3.4mm) maximum For 6mm Bushing: 1 Locking Ring AT507M, 1 Internal Tooth Lockwasher AT509, 2 Hex Nuts AT513M For 12mm Bushing: 1 Hex Face Nut AT503M, 1 Locking Ring AT506M, 1 Internal Tooth Lockwasher AT508, 1 Hex Mounting Nut AT527M .450” (11.4mm) Flatted with 6mm Bushing No Code .689” (17.5mm) Large Bat with 12mm Bushing TERMINALS Solder Lug B D .748” (19.0mm) White Capped Column with 12mm Bushing .512” (13.0mm) White Cap with 6mm Bushing Panel Cutouts Panel Thickness with Locking Ring .102” (2.6mm) maximum Panel Thickness with Keyway .256” (6.5mm) maximum Panel Thickness with Locking Ring .217” (5.5mm) maximum Standard Hardware Z P No Code .187” (4.75mm) Quick Connect Straight PC (12.5) Dia .492 (11.5) .453 (1.5) .060 (9.0) .354 (12.5) Dia .492 (3.0) Dia .118 (6.35) Dia .250 (5.6) .220 (0.6) .024 (6.35) Dia .250 (6.5) .256 (2.2) Dia .087 TYPICAL SWITCH DIMENSIONS P2012 P2011 models do not have terminal 1a. 12mm Bushing P2021B, P2022B, P2023B 6mm Bushing P2011, P2012, P2013 SPST SPDT DPST DPDT P2022B P2021 models do not have terminals 1a & 2a. 25° (13.0) .512 (4.2) Dia .165 (5.08) .20025° (11.4) .450 (2.54) .100 (19.0) .748 25° (4.4) Dia .173 Keyway (11.0) .433 (13.0) .512 (8.0) .315 (7.62) .300 M6 P0.75 (0.5) .020 (0.8) .031 (5.0) .197 25° (4.2) Dia .165 (22.0) .866 (1.0) Typ .039 (1.25) x (2.0) Typ .049 x .079 (0.9) .035 (20.5) .807 (2.6) .102 Keyway (20.0) .787 M12 P1 (7.62) .300 (0.5) .020 (0.8) .031 (5.0) .197 25° (6.0) Dia .236 (17.5) .689 (12.0) .472 (21.1) .831 (1.0) Typ .039 (1.25) x (2.0) Typ .049 x .079 2a 1a 1b2b (10.16) .400 (20.5) .807 (2.6) Typ .102 (17.5) .689 25° (6.0) Dia .236 (10.16) .400 (1.8) Dia Typ .071 (7.62) Typ .3001 1a2a 1b2b (10.16) .400 (1.8) Dia Typ .071 (7.62) Typ .30012 1b2b (1.8) Dia Typ .071 (7.62) Typ .3001 (1.8) Dia Typ .071 (7.62) Typ .3001