DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

SIDACtor® Protection Thyristors 134 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. LCAS Protection Asymmetrical Discrete Series - DO-214

Electrical Characteristics

@lDRM=5μA VS @100V/μs IH IS IT VT @IT=2.2 A Capacitance @1MHz, 2V bias V min V max mA min mA max A max V max pF min pF max P1200SALRP P12A 100 130 120 800 2.2 4 30 45 P2000SALRP P20A 180 220 120 800 2.2 4 25 35 P2500SALRP P25A 230 290 120 800 2.2 4 20 35 P1200SBLRP P12B 100 130 120 800 2.2 4 30 65 P2000SBLRP P20B 180 220 120 800 2.2 4 25 95 P2500SBLRP P25B 230 290 120 800 2.2 4 35 95 P1200SCLRP P12C 100 130 120 800 2.2 4 20 35 P2000SCLRP P20C 180 220 120 800 2.2 4 20 35 P2500SCLRP P25C 230 290 120 800 2.2 4 30 85 Schematic Symbol Not Applicable The Asymmetrical Discrete Series are SIDACtor® devices designed to protect LCAS (Line Circuit Access Switch) devices from damaging overvoltage transients. The series provides a specialized asymmetrical overvoltage protection solution that enables equipment to comply with various global requlatory standards.

Description

Features and Benefits t Low voltage overshoot t Low on-state voltage t Does not degrade with use t Fails short circuit when surged in excess of ratings t LCAS specific tip and ring thresholds Applicable Global Standards t TIA-968-A t TIA-968-B t ITU K.20/21 Enhanced Level* t ITU K.20/21 Basic Level t GR 1089 Inter-building* t GR 1089 Intra-building t IEC 61000-4-5 t YD/T 1082 t YD/T 993 t YD/T 950 *A/B-rated parts require series resistance Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are bi-directional.

SIDACtor® Protection Thyristors 135 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. LCAS Protection Surge RatingsSeries IPP ITSM 50/60 Hz di/dt0.2x310 1 0.5x700 2 2x10 1 2x10 2 8x20 1 1.2x50 2 10x160 1 10x160 2 10x560 1 10x560 2 5x320 1 9x720 2 10x360 1 10x360 2 10x1000 1 10x1000 2 5x310 1 10x700 2 A min A min A min A min A min A min A min A min A min A min Amps/μs max A2 0 1 5 0 1 5 0 9 0 5 0 7 5 7 5 4 5 7 5 2 0 5 0 0 B 25 250 250 150 100 100 125 80 100 25 500 C 50 500 400 200 150 200 175 100 200 30 500 Package Symbol Parameter Value Unit DO-214AA TJ Operating Junction Temperature Range UP TS Storage Temperature Range UP R0JA Thermal Resistance: Junction to Ambient 90 °C/W Thermal Considerations 25°C Case Temperature (TC) - ºC 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 Ratio of IH IH (TC = 25ºC) Normalized VS Change vs. Junction T emperature Normalized DC Holding Current vs. Case T emperature IH IT IS IDRM VDRMVT +V-V VS 100 tr td Peak Value Half Value t – Time (μs) IPP – Peak Pulse Current – %I PP tr = rise time to peak value td = decay time to half value Waveform = t r x td V-I Characteristics tr x td Pulse Waveform -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C Percent of VS Change – % 25 °C Notes:

1 Current waveform in μs

2 Voltage waveform in μs

  • Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP - The device must initially be in thermal equilibrium with -40°C < TJ <

SIDACtor® Protection Thyristors 136 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. LCAS Protection Part MarkingPart Numbering Physical Specifications Environmental Specifications Lead Material Copper Alloy T erminal Finish 100% Matte-Tin Plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Time T emperature TP TL TS(max) TS(min) tP tL tS time to peak temperature (t 25ºC to peak) Ramp-down Ramp-up Preheat Critical Zone TL to TP Figure 1 Soldering Parameters High T emp Voltage Blocking 80% Rated VDRM (VAC Peak ¡$PS 504 or 1008 hrs. MIL -STD-750 (Method 1040) JEDEC, JESD22-A-101 T emp Cycling ¡$UP NJOEXFMM VQUP cycles. MIL -STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased T emp & Humidity 52 V DC VQUPIST&*" JEDEC, JESD22-A-101 High T emp Storage ¡$IST.*-45% .FUIPE JEDEC, JESD22-A-101 Low T emp Storage -65°C, 1008 hrs. Thermal Shock ¡$UP NJOEXFMM TFDUSBOTGFS 10 cycles. MIL -STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker T est) BUN VQUPIST&*" JEDEC, JESD22-A-102 Resistance to Solder Heat TFDT.*-45% .FUIPE Moisture Sensitivity Level IST SFnPXDZDMFT ¡$1FBL +&%&$+45% -FWFM Reflow Condition Pb-Free assembly (see Fig. 1) Pre Heat - Temperature Min (Ts(min)) - Temperature Max (Ts(max)) - Time (Min to Max) (ts) 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) - Temperature (tL) 60-150 secs. Peak Temp (TP) Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed P xxx 0 S x L RP TYPE P: SIDACtor MEDIAN VOLTAGE CONSTRUCTION VARIABLE PACKAGE TYPE IPP RATING RoHS COMPLIANT REEL PACK Pxxx Date Code Part Marking Code (Refer to Electrical Characteristics Table) xxxxx

SIDACtor® Protection Thyristors 137 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. LCAS Protection Package Type Description Quantity Added Suffix Industry Standard S DO-214AA Tape & Reel Pack 2500 RP EIA-481-D Packing Options T ape and Reel Specification — DO-214AA 0.472 (12.0) 0.36 (9.2) 0.315 (8.0) 0.157 (4.0) 0.49 (12.4) 0.512 (13.0) Arbor Hole Dia. 12.99 (330.0) Dimensions are in inches (and millimeters). Direction of Feed 0.059 DIA(1.5) Cover tape Dimensions — DO-214AA 0.079 (2.0) 0.1 10 (2.8) 0.079 (2.0) Pad Outline H K E F G AC B D Case Temperature Measurement Point inch (millimeter) Dimensions Inches Millimeters Min Max Min Max A 0.130 0.156 3.30 3.95 B 0.201 0.220 5.10 5.60 C 0.077 0.087 1 .95 2.20 D 0.159 0.181 4.05 4.60 E 0.030 0.063 0.75 1 .60 F 0.075 0.096 1 .90 2.45 G 0.002 0.008 0.05 0.20 H 0.077 0.104 1 .95 2.65 K 0.006 0.016 0.15 0.41