P1L OMRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
- Low cost achieved by high precision injection molding
- Anti-reflective (AR) coating available
- Insertion loss (IL) can be reduced through customization
- Custom lens and various channel configurations available (i.e. 1 x 4, 2 x 12, etc.) *1 Light Source: 850nm (Steady State Mode by LED)/Air Gap: 1.5mm (Lens to Lens) Attached to the MT guide pin without any other alignment and matching glue Light Source: 850nm (Steady State Mode by LED)/Air Gap: 0.4mm (Fibre to Lens) Attached to the MT guide pin without any other alignment and matching glue Light Source: 850nm_VCSEL(*12um, Divergence < 30° )/Air Gap: 0.3mm (VCSEL to Lens), 0.3mm (Lens to Fiber) active alignment for VCSEL side, non active alignment for fiber side without matching glue between fiber and lens *4 Lens position tolerance is defined as an error to the true position referred to the center point of alignment holes
Applications
- Transceiver (For Parallel Optical Link)
- Optical Interconnection
- Board-to-board
- Chip-to-chip Interconnection
- Free-space Optical Connectivity Easy alignment with high precision positioning holes based on MT guide pins Flat and Right Angle Type Micro Lens Arrays Provide Low Cost Optical Connections in Free Space Applications