P1935 PDI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Power Amplifier 1880-1920 MHz, 35 dB min. Gain @ 1900 Hz @ 33.5 dBm Output Page 1 of 5 September 2006 Document Revision Level B

FEATURES

35 dB min. Gain @ 1900MHz

  • 1.9 GHz Power Amplifier Module
  • Typical 33.5 dBm output power
  • Excellent adjacent leakage power
  • Typical 35.7 dB power gain
  • Low cost metal package APPLICATION
  • Final stage power amplifier of base station for PHS

DESCRIPTION

  • The P1935 is a high performance 1.9 GHz band power amplifier offering excellent linearity. The device provides 33.5 dBm output power with a typical 35.7 dB gain at 1.9 GHz. It is housed in a cost effective metal package and operates from +10 V and –5 V power supplies. LIMITING VALUES Notes: Operating the device above these parameters may cause permanent damage, Case Temperature Tc=25°C SYMBOL PARAMETER MIN. MAX. UNIT V1 - 12 V DC supply voltage - -7 V Pin Input Power - 10 dBm Tstg Storage Temperature - 40 + 95 °C Topt Operating Temperature - 20 + 80 °C CHARACTERISTICS Table 1: Test condition 25°C SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT f Frequency 1880 1920 MHz Id Supply Current - 1200 1270 mA Ga Power Gain 35 35.7 - dB Input VSWR - 1.5 2.5 - 2f0 - -55 -40 dBc 3f0 Harmonic Distortion Pout=33.5 dBm V1= 10 V V2= -5 V - -55 -36 dBc Padj1 ± 600 kHz - -64 -61 dBc Padj2 Adjacent Channel Leakage Power1) ± 900 kHz - -71 -69 dBc Notes:1) RF signal modulation is per PHS RCR-28

Power Amplifier 1880-1920 MHz, 35 dB min. Gain @ 1900 Hz @ 33.5 dBm Output Page 2 of 5 September 2006 Document Revision Level B Power Characteristics: P1935 -20 -15 -10 -5 0 5 10 Pin [dBm] Pout [dBm] f=1900MHz, V1=10V, V2= -5V Gain vs. Pout: P1935 20 22 24 26 28 30 32 34 36 38 Pout [dBm] Gain [dB] f=1900MHz, V1=10V, V2= -5V

Power Amplifier 1880-1920 MHz, 35 dB min. Gain @ 1900 Hz @ 33.5 dBm Output Page 3 of 5 September 2006 Document Revision Level B Harmonic Distortion: P1935 -100 -90 -80 -70 -60 -50 -40 -30 20 22 24 26 28 30 32 34 36 38 Pout [dBm] 2fo , 3fo [dBc] 2fo 3fo f=1900MHz, V1=10V, V2= -5V ACPR: P1935 -90 -80 -70 -60 -50 -40 20 22 24 26 28 30 32 34 36 38 Channel Pout [dBm] ACPR [dBc] + 600 kHz - 600 kHz + 900 kHz - 900 kHz f=1900MHz, V1=10V, V2= -5V

Power Amplifier 1880-1920 MHz, 35 dB min. Gain @ 1900 Hz @ 33.5 dBm Output Page 4 of 5 September 2006 Document Revision Level B all dimensions in mm Pinning: European Projection Notes: 26.4 ±0.1 29.0 4x R1.2 5.0 13.0 9.0 1.45 4.0 ±0.5 2.0 2.4 0.3 22.0 ±0.1 1 2 3 4 5 6 Case RFout V1 (10V) V2 (-5V) V1 (10V) V2 (-5V) RFin Ground production datecode (year, week) acc. IEC62 P1935 Germany YYWW C2C2 (-5V) (10V) (10V) P1935 Germany YYWW 0.1 F μF μ

Power Amplifier 1880-1920 MHz, 35 dB min. Gain @ 1900 Hz @ 33.5 dBm Output Page 5 of 5 September 2006 Document Revision Level B DEFINITIONS Data Sheet Status Objective Product Specification This data sheet contains target or goal specifications for product development. Preliminary Product Specification This data sheet contains preliminary data; supplementary data may be published later. Product Specification This data sheet contains final product specifications. Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability.

Application information

Where application information is given, it is advisory and does not form part of the specification. Premier Devices reserves the right to make changes without further notice to any products herein. Premier Devices makes no warranty representation or guarantee regarding the suitability of its products for any particular purpose, nor does Premier Devices assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wit hout limitation consequential or incidental damages. “Typical” parameters which may be provided in Premier Devices datashee ts and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer´s technical exper ts. Premier Devices does not convey any license under its patent rights nor the rights of others. Premier Devices pr oducts are not designed, intended, or authorized for use as components in systems intended for surgical implant into t he body, or other applications intended to support or sustain life, or for any other application in which the failure of the Premier Devices product could create a situation where personal injury or death may occur. Should Buyer purchase or use Premier Devices products for any such unintended or unauthorized application, Buyer shall indemnify and hold Prem ier Devices and its officers , employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, and claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Premier Devices was negligent regarding the design or manufacture of the part. © Premier Devices Germany GmbH 2006 How to contact us: Premier Devices Germany GmbH Loeffelholzstrasse 20, D-90441 Nuernberg, Germany Phone: +49 (0) 911 9411 233, FAX: +49 (0) 911 9411 198, Email: sales.germany@premierdevices.com, Internet: http://www.premierdevices.de/