DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

SIDACtor® Protection Thyristors 163 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Baseband Protection (Voice-DS1)

Electrical Characteristics

SIDACtor® Series - DO-15 The SIDACtor Series DO-15 are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides a cost-effective through-hole solution that enables equipment to comply with global regulatory standards.

Description

@lDRM=5μA VS @100V/μs IH IS IT VT @IT=2.2 Amps Capacitance @1MHz, 2V bias V min V max mA min mA max A max V max pF min pF max P1100GALRP P11A 90 130 150 800 2.2 5 30 60 P1300GALRP P13A 120 160 150 800 2.2 5 25 40 P1500GALRP P15A 140 180 150 800 2.2 5 25 40 P1800GALRP P18A 170 220 150 800 2.2 5 25 40 P2300GALRP P23A 190 260 150 800 2.2 5 25 30 P2600GALRP P26A 220 300 150 800 2.2 5 25 30 P3100GALRP P31A 275 350 150 800 2.2 5 20 30 P3500GALRP P35A 320 400 150 800 2.2 5 20 30 P1100GBLRP P11B 90 130 150 800 2.2 5 30 60 P1300GBLRP P13B 120 160 150 800 2.2 5 25 40 P1500GBLRP P15B 140 180 150 800 2.2 5 25 40 P1800GBLRP P18B 170 220 150 800 2.2 5 25 40 P2300GBLRP P23B 190 260 150 800 2.2 5 25 30 P2600GBLRP P26B 220 300 150 800 2.2 5 25 30 P3100GBLRP P31B 275 350 150 800 2.2 5 20 30 P3500GBLRP P35B 320 400 150 800 2.2 5 20 30 Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are bi-directional. Features and Benefits t Low voltage overshoot t Low on-state voltage t Does not degrade with use t Fails short circuit when surged in excess of ratings t Low Capacitance Applicable Global Standards t TIA-968-A t TIA-968-B t ITU K.20/21 Enhanced Level* t ITU K.20/21 Basic Level t GR 1089 Inter-building* t GR 1089 Intra-building t IEC 61000-4-5 t YD/T 1082 t YD/T 993 t YD/T 950 * A/B-rated parts require series resistance

SIDACtor® Protection Thyristors 164 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Baseband Protection (Voice-DS1) Package Symbol Parameter Value Unit DO-15 TJ Operating Junction Temperature Range UP TS Storage Temperature Range UP R0JA Thermal Resistance: Junction to Ambient 60 °C/W Surge Ratings Series IPP ITSM 10x560 1 10x560 2 10x1000 1 10x1000 2 50 / 60 Hz Amps min Amps min Amps min A5 0 4 5 2 0 B 100 80 25 Thermal Considerations Notes:

1 Current waveform in μs

2 Voltage waveform in μs

  • Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPGUP - The device must initially be in thermal equilibrium with -40°C < TJ < Time T emperature TP TL TS(max) TS(min) tP tL tS time to peak temperature (t 25ºC to peak) Ramp-down Ramp-up Preheat Critical Zone TL to TP Figure 1 Soldering Parameters Reflow Condition Pb-Free assembly (see Fig. 1) Pre Heat - Temperature Min (Ts(min)) - Temperature Max (Ts(max)) - Time (Min to Max) (ts) 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) - Temperature (tL) 60-150 secs. Peak Temp (TP) Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed

SIDACtor® Protection Thyristors 165 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Baseband Protection (Voice-DS1) Physical Specifications Environmental Specifications Lead Material Copper Alloy T erminal Finish 100% Matte-Tin Plated Body Material UL recognized epoxy meeting flammability classification 94V-0 High T emp Voltage Blocking 80% Rated VDRM (VAC Peak ¡$PS 504 or 1008 hrs. MIL -STD-750 (Method 1040) JEDEC, JESD22-A-101 T emp Cycling ¡$UP NJOEXFMM VQUP cycles. MIL -STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased T emp & Humidity 52 V DC VQUPIST&*" JEDEC, JESD22-A-101 High T emp Storage ¡$IST.*-45% .FUIPE JEDEC, JESD22-A-101 Low T emp Storage -65°C, 1008 hrs. Thermal Shock ¡$UP NJOEXFMM TFDUSBOTGFS 10 cycles. MIL -STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker T est) BUN VQUPIST&*" JEDEC, JESD22-A-102 Resistance to Solder Heat TFDT.*-45% .FUIPE Moisture Sensitivity Level IST SFnPXDZDMFT ¡$1FBL +&%&$+45% -FWFM Part Marking Part Numbering CONSTRUCTION VARIABLE REEL PACK IPP RATING RoHS COMPLIANT TYPE P = SIDACtor P x L RP MEDIAN VOLTAGE PACKAGE TYPE xxx 0 G Pxxxx Part Marking Code (Refer to Electrical Characteristics Table) XXXXX Date Code Dimensions — DO-15 L LG D B Dimension Inches Millimeters MIN MAX MIN MAX B 0.028 0.034 0.711 0.864 D 0.12 0.14 3.048 3.556 G 0.235 0.27 5.969 6.858 L 1 25.4 Packing Options Package Type Description Quantity Added Suffix Industry Standard G DO-15 Axial Tape & Reel 5000 RP EIA-RS- 296-D T ape and Reel Specification — DO-15 Spacing off center, either side 0.039 (1.0) B C A D E recess depth max 0.75” 2.55 (64.8) TYP 3.15 (80.0) TYP Dimensions are in inches (and millimeters). Direction of FeedG F Symbols Description Inches MM A Component Spacing (lead to lead) œw 5.08 ± 0.508 B Inner Tape Pitch œw 52.37 ± 1 .498 C Tape Width w 6.35 D Max. Off Alignment w 1 .219 E Reel Dimension w 330.2 F Max. Hub Recess w 76.19 G Max. Abor Hole w 17 .27