P18

P18 FERROXCUBE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

Supersedes data of September 2004 2008 Sep 01 FERROXCUBE P18/11 P cores and accessories

2008 Sep 01 966

P cores and accessories P18/11 CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.597 mm −1 Ve effective volume 1120 mm 3 Ie effective length 25.8 mm Ae effective area 43.3 mm 2 Amin minimum area 36.0 mm 2 m mass of set ≈6.0 g handbook, halfpage MGC158 3.1 0.1O 7.2 0.4 0.4 0.2 10.6 0.1 2.3 0.15 14.9 0.5 3.8 0.6 7.6 0 0.3 18.4 0 0.8 0.313.4 M1.7 Fig.1 P18/11 core set. Dimensions in mm. Core sets for filter applications Clamping force for AL measurements, 80 ±20 N. GRADE AL (nH) µe TOTAL AIR GAP (µm) TYPE NUMBER (WITH NUT) TYPE NUMBER (WITHOUT NUT) 3D3 63 ±3% ≈ 30 ≈ 1210 P18/11-3D3-E63/N P18/11-3D3-E63 100 ±3% ≈ 47 ≈ 670 P18/11-3D3-E100/N P18/11-3D3-E100 160 ±3% ≈ 76 ≈ 370 P18/11-3D3-E160/N P18/11-3D3-E160 1400 ±25% ≈ 665 ≈ 0 − P18/11-3D3 3H3 160 ±3% ≈ 76 ≈ 400 P18/11-3H3-E160/N P18/11-3H3-E160 250 ±3% ≈ 119 ≈ 240 P18/11-3H3-A250/N P18/11-3H3-A250 315 ±3% ≈ 149 ≈ 180 P18/11-3H3-A315/N P18/11-3H3-A315 400 ±3% ≈ 190 ≈ 140 P18/11-3H3-A400/N P18/11-3H3-A400 630 ±5% ≈ 299 ≈ 80 P18/11-3H3-A630/N P18/11-3H3-A630 3100 ±25% ≈ 1470 ≈ 0 − P18/11-3H3

2008 Sep 01 967

P cores and accessories P18/11 Core sets for general purpose transformers and power applications Clamping force for AL measurements, 80 ±20 N. Core sets of high permeability grades Clamping force for AL measurements, 60 ±20 N. Properties of core sets under power conditions Note 1. Measured at 60 °C. GRADE AL (nH) µe AIR GAP (µm) TYPE NUMBER 3C81 100 ±3% ≈ 47 ≈ 710 P18/11-3C81-E100 160 ±3% ≈ 76 ≈ 400 P18/11-3C81-A160 250 ±3% ≈ 119 ≈ 240 P18/11-3C81-A250 315 ±3% ≈ 149 ≈ 180 P18/11-3C81-A315 400 ±3% ≈ 190 ≈ 140 P18/11-3C81-A400 4000 ±25% ≈ 1900 ≈ 0 P18/11-3C81 3C91 4000 ±25% ≈ 1900 ≈ 0 P18/11-3C91 3F3 100 ±3% ≈ 47 ≈ 710 P18/11-3F3-E100 160 ±3% ≈ 76 ≈ 400 P18/11-3F3-A160 250 ±3% ≈ 119 ≈ 240 P18/11-3F3-A250 315 ±3% ≈ 149 ≈ 180 P18/11-3F3-A315 400 ±3% ≈ 190 ≈ 140 P18/11-3F3-A400 2850 ±25% ≈ 1350 ≈ 0 P18/11-3F3 GRADE AL (nH) µe AIR GAP (µm) TYPE NUMBER 3E27 7500 ±25% ≈ 3560 ≈ 0 P18/11-3E27 GRADE B( m T )a t C O R EL O S S( W )a t H=2 5 0A / m ; f = 25 kHz; T = 100 °C f = 25 kHz; =2 0 0m T ; T = 100 °C f=1 0 0k H z ; =1 0 0m T ; T=1 0 0 °C f=1 0 0k H z ; = 200 mT; T = 100 °C f = 400 kHz; =5 0m T ; T = 100 °C Bˆ Bˆ Bˆ Bˆ

2008 Sep 01 968

P cores and accessories P18/11 INDUCTANCE ADJUSTERS General data ITEM SPECIFICATION Material of head and thread polypropylene (PP), glass fibre reinforced Maximum operating temperature 125 °C handbook, halfpage MGC159 8.8 3.35 M 1.7 3.13O 0.07 2.4 min 0.7 Fig.2 P18/11 inductance adjuster. Dimensions in mm. Inductance adjuster selection chart (applies to all types) Note 1. Maximum adjustment range. GRADE AL (nH) TYPES FOR LOW ADJUSTMENT ∆L/L(1) types for medium adjustment ∆L/L(1) TYPES FOR HIGH ADJUSTMENT ∆L/L(1) 3H3 63 −− ADJ-P18-YELLOW 16 −− 100 −− − − ADJ-P18-BROWN 42

160 ADJ-P18-YELLOW 9 ADJ-P18-RED 18 ADJ-P18-BROWN 28

250 ADJ-P18-RED 11 ADJ-P18-WHITE 14 ADJ-P18-BROWN 18

315 ADJ-P18-RED 8 ADJ-P18-BROWN 14 ADJ-P18-VIOLET 20

400 ADJ-P18-WHITE 8 ADJ-P18-VIOLET 16 −−

630 ADJ-P18-VIOLET 8 −− −−

1000 ADJ-P18-VIOLET 5 −− −−

3D3 40 −− − − ADJ-P18-YELLOW 19 63 −− ADJ-P18-YELLOW 17 −− 100 −− − − ADJ-P18-RED 26 160 −− ADJ-P18-RED 15 −−

2008 Sep 01 969

P cores and accessories P18/11 COIL FORMERS General data CP-P18/11 Winding data and area product for CP-P18/11 coil former PARAMETER SPECIFICATION Coil former material polybutyleneterephtalate (PBT), glass reinforced, flame retardant in accordance with “UL 94V-0”; UL file number E45329 (R) Maximum operating temperature 155 °C, “IEC 60085”, class F NUMBER OF SECTIONS WINDING AREA (mm2) MINIMUM WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 17.1 5.7 36.6 740 CP-P18/11-1S 22 × 7.95 2 × 2.65 36.6 2 x 344 CP-P18/11-2S 33 × 4.95 3 × 1.6 36.6 3 x 214 CP-P18/11-3S handbook, full pagewidth MGC160 8.7 0 0.12.0 7.7 0.1 14.8 0 0.2 0.5 0.4 0.4 0.3 7 0 0.1 Fig.3 CP-P18/11 coil former. Dimensions in mm.

2008 Sep 01 970

P cores and accessories P18/11 General data 6-pins P18/11 coil former for PCB mounting Winding data and area product for 6-pins P18/11 coil former for PCB mounting PARAMETER SPECIFICATION Coil former material polyamide (P A6.6), glass reinforced, flame retardant in accordance with “UL 94V-0”; UL file number E41938(M) Maximum operating temperature 130 °C, “IEC 60085”, class B Pin material copper-zinc alloy (CuZn), tin (Sn) plated Resistance to soldering heat “IEC 60068-2-20”, Part 2, Test Tb, method 1B, 350 °C, 3.5 s Solderability “IEC 60068-2-20”, Part 2, Test Ta, method 1, 235 °C, 2 s NUMBER OF SECTIONS MINIMUM WINDING AREA (mm2) NOMINAL WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) LENGTH OF PINS (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 16.8 6.0 36.7 4.4 727 CPV-P18/11-1S-6PD 1 16.8 6.0 36.7 6.8 727 CPV-P18/11-1S-6PDL 22 × 7.61 2 × 2.8 36.7 4.4 2 x 330 CPV-P18/11-2S-6PD 22 × 7.61 2 × 2.8 36.7 6.8 2 x 330 CPV-P18/11-2S-6PDL 33 × 4.58 3 × 1.7 36.7 4.4 3 x 198 CPV-P18/11-3S-6PD 33 × 4.58 3 × 1.7 36.7 6.8 3 x 198 CPV-P18/11-3S-6PDL handbook, full pagewidth MGB622 8.45 max 7.05 max 6.05 21.5 8.65 2.4 4.35 min10.2 max 7.7 min 14.8 max 24.55 max 1.7 0.75 7.1 Fig.4 P18/11 coil former for PCB mounting; 6-pins. Dimensions in mm.

2008 Sep 01 971

P cores and accessories P18/11 MOUNTING PARTS General data for mounting parts ITEM REMARKS FIGURE TYPE NUMBER Tag plate material: phenolformaldehyde (PF), glass reinforced 5 TGP-P18/11-C flame retardant: in accordance with “UL 94V-0”; UL file number E41429 maximum operating temperature: 180 °C, “IEC 60085”, class H pins: copper-tin alloy (CuSn), tin (Sn) plated resistance to soldering heat in accordance with “IEC 60068-2-20”, Part 2, Test Tb, method 1B: 350 °C, 3.5 s solderability in accordance with “IEC 60068-2-20”, Part 2, Test Ta, method 1: 235°C, 2 s Container copper-zinc alloy (CuZn), tin (Sn) plated 6 CON-P18/11 earth pins: presoldered Spring CrNi-steel 7 SPR-P18/11 spring force: ≈100 N when mounted Clamp spring steel, tin-plated 8 CLM/TP-P18/11 Washer phenolformaldehyde (PF) 9 WAS-CLM/TP-P18/11 2.1 1.5 10.16 5.08 5.0810.16 mark 19.7 max 4 4.8 0.8 2.54 1.3 0.15 MGC161 O O Fig.5 Tag plate: TGP-P18/11-C. Dimensions in mm.

2008 Sep 01 972

P cores and accessories P18/11 handbook, full pagewidth CBW423 mark 8 12.7 max. 19.9 max. 16.55 min. 8.2 0.6 Fig.6 Container: CON-P18/11. Dimensions in mm. handbook, halfpage MGC163 17.3 max 1.4 0.3 Fig.7 Spring: SPR-P18/11. Dimensions in mm.

2008 Sep 01 973

P cores and accessories P18/11 handbook, halfpage MBE683 16.5 11.7 9.1 16.8 18.3 Fig.8 Clamp: CLM/TP-P18/11. Dimensions in mm. handbook, halfpage MGB605 17.5 ± 0.25 9.27 ± 0.05 0.46 ± 0.13 Fig.9 Washer: WAS-CLM/TP-P18/11. Dimensions in mm.

2008 Sep 01 974

P cores and accessories P18/11 DATA SHEET STATUS DEFINITIONS DISCLAIMER Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains prelimin ary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability.