P1602ACMCLXX | DigiCamel IC Datasheet

Online Datasheet

Read P1602ACMCLXX online.

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 5

Technical content

SIDACtor® Protection Thyristors Revised: February 22, 2011 © 2011 Littelfuse, Inc. Speciﬁcations are subject to change without notice. Please refer to www.littelfuse.com for current information. Broadband Optimized™ Protection MC Series - Modiﬁed TO-220

Electrical Characteristics

MC Series Modiﬁed TO-220 are low capacitance SIDACtor® devices designed to protect various types of broadband equipment from damaging overvoltage transients. The series provides a robust single port solution that enables equipment to comply with various global regulatory standards while limiting the impact to broadband signals. (T) (R) (G)

Description

Applicable Global Standards Features and Beneﬁts t Low voltage overshoot t Low on-state voltage t Does not degrade with use t Fails short circuit when surged in excess of ratings t Robust Modiﬁed TO-220 Package t 40% lower capacitance than our Baseband Protectors, for applications that demand greater signal integrity t Custom lead forms available Agency Approvals Agency Agency File Number E133083 Schematic Symbol Pinout Designation PIN 1 PIN 2 PIN 3 t TIA-968-A t TIA-968-B t ITU K.20/21 Enhanced Level t ITU K.20/21 Basic Level t GR 1089 Inter-building* t GR 1089 Intra-building* t IEC 61000-4-5 t YD/T 1082 t YD/T 993 t YD/T 950 *A-rated parts require series resistance Part Number Marking VDRM @lDRM=5μA VS @100V/μs VDRM @lDRM=5μA VS @100V/μs IH IS IT VT @ IT=2.2 Amps Capacitance V min V max V min V max mA min mA max A max V min Pins 1-2, 3-2 Pins 1-3 Pins 1-2, 3-2 P0302AAMCLxx P0302AAMC 6 25 12 50 50 800 2.2 4 See Capacitance Values Table P0602AAMCLxx P0602AAMC 25 40 50 80 50 800 2.2 4 P0602ACMCLxx P0602ACMC 25 40 50 80 50 800 2.2 4 P1402ACMCLxx P1402ACMC 58 77 116 154 150 800 2.2 4 P1602ACMCLxx P1602ACMC 65 95 130 190 150 800 2.2 4 P2202ACMCLxx P2202ACMC 90 130 180 260 150 800 2.2 4 P2702ACMCLxx P2702ACMC 120 160 240 320 150 800 2.2 4 P3002ACMCLxx P3002ACMC 140 180 280 360 150 800 2.2 4 P3602ACMCLxx P3602ACMC 170 220 340 440 150 800 2.2 4 P4202ACMCLxx P4202ACMC 190 250 380 500 150 800 2.2 4 T able continues on next page.

SIDACtor® Protection Thyristors Revised: February 22, 2011 © 2011 Littelfuse, Inc. Speciﬁcations are subject to change without notice. Please refer to www.littelfuse.com for current information. Broadband Optimized™ Protection Capacitance Values Part Number pF Pin 1-2 / 3-2 Tip-Ground, Ring-Ground pF Pin 1-3 Tip-Ring MIN MAX MIN MAX P0302AAMCLxx 25 55 15 35 P0602AAMCLxx 15 35 10 20 P0602ACMCLxx 25 45 10 25 P1402ACMCLxx 40 60 20 35 P1602ACMCLxx 35 55 20 35 P2202ACMCLxx 45 70 25 40 P2702ACMCLxx 40 60 20 35 P3002ACMCLxx 35 55 20 35 P3602ACMCLxx 35 50 15 30 P4202ACMCLxx 30 50 15 30 P4802ACMCLxx 30 45 15 30 P6002ACMCLxx 30 45 15 25 Surge RatingsSeries IPP ITSM 50/60 Hz di/dt0.2x310 1 0.5x700 2 2x10 1 2x10 2 8x20 1 1.2x50 2 10x160 1 10x160 2 10x560 1 10x560 2 5x320 1 9x720 2 10x360 1 10x360 2 10x1000 1 10x1000 2 5x310 1 10x700 2 A min A min A min A min A min A min A min A min A min A min A/μs Max A 2 01 5 0 1 5 09 0 5 07 57 5 4 5 7 52 0 5 0 0 C 50 500 400 200 150 200 175 100 200 30 500 Electrical Characteristics (continued) Part Number Marking VDRM @lDRM=5μA VS @100V/μs VDRM @lDRM=5μA VS @100V/μs IH IS IT VT @ IT=2.2 Amps Capacitance V min V max V min V max mA min mA max A max V minPins 1-2, 3-2 Pins 1-3 Pins 1-2, 3-2 P4802ACMCLxx P4802ACMC 220 300 440 600 150 800 2.2 4 See Capacitance Values TableP6002ACMCLxx P6002ACMC 275 350 550 700 150 800 2.2 4 Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are bi-directional (unless otherwise noted). - XX Part Number Sufﬁx: ‘RP’ (Reel Pack), Blank (Bulk Pack), or ‘60’ (Type 60 lead form, Bulk Pack. Special order item -- contact factory.) Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias. Notes:

1 Current waveform in μs

2 Voltage waveform in μs

Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP - The device must initially be in thermal equilibrium with -40°C < TJ <

SIDACtor® Protection Thyristors Revised: February 22, 2011 © 2011 Littelfuse, Inc. Speciﬁcations are subject to change without notice. Please refer to www.littelfuse.com for current information. Broadband Optimized™ Protection Package Symbol Parameter Value Unit Modiﬁed TO-220 PIN 1 PIN 2 PIN 3 TJ Operating Junction Temperature Range UP TS Storage Temperature Range UP R0JA Thermal Resistance: Junction to Ambient 50 °C/W Thermal Considerations IH IT IS IDRM VDRMVT +V-V VS 100 tr td Peak Value Half Value t – Time (μs) IPP – Peak Pulse Current – %I PP tr = rise time to peak value td = decay time to half value Waveform = t r x td V-I Characteristics tr x td Pulse Waveform 25°C Case Temperature (TC) - ºC 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 Ratio of IH IH (TC = 25ºC) Normalized VS Change vs. Junction T emperature Normalized DC Holding Current vs. Case T emperature -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C Percent of VS Change – % 25 °C

SIDACtor® Protection Thyristors Revised: February 22, 2011 © 2011 Littelfuse, Inc. Speciﬁcations are subject to change without notice. Please refer to www.littelfuse.com for current information. Broadband Optimized™ Protection Time T emperature TP TL TS(max) TS(min) tP tL tS time to peak temperature (t 25ºC to peak) Ramp-down Ramp-up Preheat Critical Zone TL to TP Figure 1 Soldering Parameters Physical Speciﬁcations Environmental Speciﬁcations Lead Material Copper Alloy T erminal Finish 100% Matte-Tin Plated Body Material UL recognized epoxy meeting ﬂammability classiﬁcation 94V-0 High T emp Voltage Blocking 80% Rated VDRM (VAC Peak ¡$PS 504 or 1008 hrs. MIL -STD-750 (Method 1040) JEDEC, JESD22-A-101 T emp Cycling ¡$UP NJOEXFMM VQUP cycles. MIL -STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased T emp & Humidity 52 V DC VQUPIST&*" JEDEC, JESD22-A-101 High T emp Storage ¡$IST.*-45% .FUIPE JEDEC, JESD22-A-101 Low T emp Storage -65°C, 1008 hrs. Thermal Shock ¡$UP NJOEXFMM TFDUSBOTGFS 10 cycles. MIL -STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker T est) BUN VQUPIST&*" JEDEC, JESD22-A-102 Resistance to Solder Heat TFDT.*-45% .FUIPE Moisture Sensitivity Level IST SFnPXDZDMFT ¡$1FBL +&%&$+45% -FWFM Reﬂow Condition Pb-Free assembly (see Fig. 1) Pre Heat - Temperature Min (Ts(min)) - Temperature Max (Ts(max)) - Time (Min to Max) (ts) 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reﬂow - Temperature (TL) (Liquidus) - Temperature (tL) 60-150 secs. Peak Temp (TP) Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed

SIDACtor® Protection Thyristors Revised: February 22, 2011 © 2011 Littelfuse, Inc. Speciﬁcations are subject to change without notice. Please refer to www.littelfuse.com for current information. Broadband Optimized™ Protection Part Marking Packing Options Part Numbering Package Type Description Quantity Added Sufﬁx Industry Standard A Modiﬁed TO-220 Tape and Reel Pack 700 RP EIA-468-B Modiﬁed TO-220 Bulk Pack 500 N/A N/A Modiﬁed TO-220, Type 60 Lead Form Bulk Pack 500 (special order item, contact factory for details) N/A CONSTRUCTION VARIABLE PACKING OPTIONS IPP RATING RoHS COMPLIANT TYPE P = SIDACtor P MC L xx MEDIAN VOLTAGE PACKAGE TYPE xxx 2A x MC Series Blank, RP or 60 -- for Type 60 orders, contact factory xxxxx XXXXXXXXX Part Marking Code (Refer to Electrical Characteristics Table) Date Code T ape and Reel Speciﬁcation — Modiﬁed TO-220 1.626 (41.15) 0.720 (18.29) 0.360 (9.14) 0.240 (6.10) 0.019 (0.5) 0.750 ± 0.010 (19.05 ± 0.25) 0.500 (12.7) 0.100 (2.54) 0.100 (2.54) 14.173 (360.0) Dimensions are in inches (and millimeters). 1.968 (50.0) Direction of Feed Dimensions - Modiﬁed TO-220 D F PG A O Temperat ure Measurement Poi n t PIN 3 PIN 2 PIN 1 J H L K M N The modiﬁed TO-220 package is designed to meet mechanical standards as set forth in JEDEC publication number 95. Inches Millimeters Min Max Min Max A 0.400 0.410 10.16 10.42 D 0.360 0.375 9.14 9.53 F 0.110 0.130 2.80 3.30 G 0.540 0.575 13.71 14.61 H 0.025 0.035 0.63 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1 .52 1 .90 M 0.070 0.085 1 .78 2.16 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.290 0.310 7 .37 7 .87

Product Information

P1602ACMCLXX specifications and overview.

Summary

The series provides a robust single port solution that enables equipment

Description

MC Series Modified TO-220 are low capacitance SIDACtor® devices designed to protect various types of broadband equipment from damaging overvoltage transients.

Source title P1602ACMCLXX Datasheet(PDF) - Littelfuse

Related Parts

More parts from the same family.

Browse manufacturer