P1402C_L LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Telecom Design Guide • © 2006 Littelfuse 3 - 13 www.littelfuse.com SIDACtor Devices Compak TwinCHIP™ SIDACtor® Device The modified DO-214AA SIDACtor devices provide low-cost, longitudinal protection. SIDACtor devices enable equipment to comply with various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968-A (formerly known as FCC Part 68). * “L” in part number indicates RoHS compliance. For non-RoHS compliant device, delete “L” from part number. For surge ratings, see table below. General Notes:

  • All measurements are made at an ambient temperature of 25 °C. I PP applies to -40 °C through +85 °C temperature range.
  • I PP is a repetitive surge rating and is guaranteed for the life of the product.
  • Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
  • V DRM is measured at IDRM.
  • V S is measured at 100 V/µs.
  • Special voltage (V S and VDRM) and holding current (IH) requirements are available upon request.
  • UL 60950 creepage requirements must be considered. * Current waveform in µs ** Voltage waveform in µs Note: Contact factory for release date of Series B. Electrical Parameters Part Number VDRM Volts VS Volts VDRM Volts VS Volts VT Volts IDRM µAmps IS mAmps IT Amps IH mAmpsPins1-2, 2-3 Pins 1-3 P1402C_L 58 77 116 154 4 5 800 2.2 120 P1602C_L 65 95 130 190 4 5 800 2.2 120 P2202C_L 90 130 180 260 4 5 800 2.2 120 P2702C_L 120 160 240 320 4 5 800 2.2 120 P3002C_L 140 180 280 360 4 5 800 2.2 120 P3602C_L 170 220 340 440 4 5 800 2.2 120 P4202C_L 190 250 380 500 4 5 800 2.2 120 P4802C_L 220 300 440 600 4 5 800 2.2 120 P6002C_L 275 350 550 700 4 5 800 2.2 120 Surge Ratings in Amps Series IPP ITSM 50 / 60 Hz di/dt 0.2x310 * 0.5x700 ** 2x10 * 2x10 ** 8x20 * 1.2x50 ** 10x160 * 10x160 ** 10x560 * 10x560 ** 5x320 * 9x720 ** 10x360 * 10x360 ** 10x1000 * 10x1000 ** 5x310 * 10x700 ** Amps Amps Amps Amps Amps Amps Amps Amps Amps Amps Amps/µs A 20 150 150 90 50 75 75 45 75 20 500 B 25 250 250 150 100 100 125 80 100 30 500 (T) (R) (G)

www.littelfuse.com 3 - 14 © 2006 Littelfuse • Telecom Design Guide Compak TwinCHIP™ SIDACtor® Device * [A/B] in part number indicates that values are for both A and B surge ratings. Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias. Thermal Considerations Package Symbol Parameter Value Unit Modified DO-214AA T J Operating Junction Temperature Range -40 to +150 °C TS Storage Temperature Range -65 to +150 °C RθJA Thermal Resistance: Junction to Ambient 85 °C/W Capacitance Values Part Number * pF Pin 1-2 / 3-2 Tip-Ground, Ring-Ground pF Pin 1-3 Tip-Ring MIN MAX MIN MAX P1402C[A/B]L 30 55 15 35 P1602C[A/B]L 30 55 15 30 P2202C[A/B]L 25 50 15 30 P2702C[A/B]L 25 45 10 25 P3002C[A/B]L 20 40 10 25 P3602C[A/B]L 20 40 10 25 P4202C[A/B]L 20 40 10 25 P4802C[A/B]L 20 35 10 20 P6002C[A/B]L 15 35 10 20 Pin 3 Pin 1 Pin 2

Compak TwinCHIP™ SIDACtor® Device Telecom Design Guide • © 2006 Littelfuse 3 - 15 www.littelfuse.com SIDACtor Devices IH IT IS IDRM VDRMVT +V-V VS V-I Characteristics 100 tr td Peak Value Half Value t – Time (µs) IPP – Peak Pulse Current – %I PP tr = rise time to peak value td = decay time to half value Waveform = t r x td tr x td Pulse Waveform -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – ˚C Percent of VS Change – % 25 ˚C Normalized VS Change versus Junction Temperature 0.4 -40 -20 0 20 40 60 80 100 120 140 160 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Case Temperature (TC) – ˚C Ratio of IH IH (TC = 25 ˚C) 25 ˚C Normalized DC Holding Current versus Case Temperature