P14-3D3-E40

P14 FERROXCUBE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

Supersedes data of September 2004 2008 Sep 01 FERROXCUBE P14/8 P cores and accessories

2008 Sep 01 949

P cores and accessories P14/8 CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.789 mm −1 Ve effective volume 495 mm 3 Ie effective length 19.8 mm Ae effective area 25.1 mm 2 Amin minimum area 19.8 mm 2 m mass of set ≈ 3.2 g handbook, halfpage MGC164 3.1 0.1O 5.6 0.4 0 8.4 0.1 0.2 0.4 0.2 1.2 0.15 11.6 0.4 2.7 1.2 6 0 0.2 14.3 0 0.5 0.39.5 M1.7 Fig.1 P14/8 core set. Dimensions in mm. Core sets for filter applications Clamping force for AL measurements, 60 ±20 N. GRADE AL (nH) µe TOTAL AIR GAP (µm) TYPE NUMBER (WITH NUT) TYPE NUMBER (WITHOUT NUT) 3D3 40 ± 3% ≈ 25 ≈ 1170 P14/8-3D3-E40/N P14/8-3D3-E40 63 ± 3% ≈ 40 ≈ 650 P14/8-3D3-E63/N P14/8-3D3-E63 100 ± 3% ≈ 63 ≈ 360 P14/8-3D3-E100/N P14/8-3D3-E100 1000 ± 25% ≈ 630 ≈ 0 − P14/8-3D3 3H3 160 ± 3% ≈ 100 ≈ 220 P14/8-3H3-A160/N P14/8-3H3-A160 250 ± 3% ≈ 157 ≈ 130 P14/8-3H3-A250/N P14/8-3H3-A250 315 ± 3% ≈ 198 ≈ 100 P14/8-3H3-A315/N P14/8-3H3-A315 400 ± 3% ≈ 251 ≈ 75 P14/8-3H3-A400/N P14/8-3H3-A400 2150 ± 25% ≈ 1350 ≈ 0 − P14/8-3H3

2008 Sep 01 950

P cores and accessories P14/8 Core sets for general purpose transformers and power applications Clamping force for AL measurements, 60 ±20 N. Core sets of high permeability grades Clamping force for AL measurements, 60 ±20 N. Properties of core sets under power conditions Note 1. Measured at 60 °C. GRADE AL (nH) µe AIR GAP (µm) TYPE NUMBER 3C81 63 ± 3% ≈ 40 ≈ 680 P14/8-3C81-E63 100 ± 3% ≈ 63 ≈ 390 P14/8-3C81-A100 160 ± 3% ≈ 100 ≈ 220 P14/8-3C81-A160 250 ± 3% ≈ 157 ≈ 130 P14/8-3C81-A250 315 ± 3% ≈ 198 ≈ 100 P14/8-3C81-A315 2800 ± 25% ≈ 1760 ≈ 0 P14/8-3C81 3C91 2800 ± 25% ≈ 1760 ≈ 0 P14/8-3C91 3F3 63 ± 3% ≈ 40 ≈ 680 P14/8-3F3-E63 100 ± 3% ≈ 63 ≈ 390 P14/8-3F3-A100 160 ± 3% ≈ 100 ≈ 220 P14/8-3F3-A160 250 ± 3% ≈ 157 ≈ 130 P14/8-3F3-A250 315 ± 3% ≈ 198 ≈ 100 P14/8-3F3-A315 2000 ± 25% ≈ 1260 ≈ 0 P14/8-3F3 GRADE AL (nH) µe AIR GAP (µm) TYPE NUMBER 3E27 5750 ± 25% ≈ 3610 ≈ 0 P14/8-3E27 GRADE B( m T )a t C O R EL O S S( W )a t H=2 5 0A / m ; f = 25 kHz; T = 100 °C f = 25 kHz; =2 0 0m T ; T = 100 °C f=1 0 0k H z ; =1 0 0m T ; T=1 0 0 °C f=1 0 0k H z ; = 200 mT; T = 100 °C f = 400 kHz; =5 0m T ; T = 100 °C Bˆ Bˆ Bˆ Bˆ

2008 Sep 01 951

P cores and accessories P14/8 INDUCTANCE ADJUSTERS General data PARAMETER SPECIFICATION Material of head and thread polypropylene (PP), glass fibre reinforced Maximum operating temperature 125 °C handbook, halfpage MGC165 6.7 2.95 M 1.7 3.13O 0.07 2.4 min 0.7 Fig.2 P14/8 inductance adjuster. Dimensions in mm. Inductance adjuster selection chart (applies to all types) Note 1. Maximum adjustment range. GRADE AL (nH) TYPES FOR LOW ADJUSTMENT ∆L/L(1) TYPES FOR MEDIUM ADJUSTMENT ∆L/L(1) TYPES FOR HIGH ADJUSTMENT ∆L/L(1) 3H3 100 −− ADJ-P14-ORANGE 14 −− 160 −− ADJ-P14-WHITE 17 ADJ-P14-BROWN 24

250 ADJ-P14-WHITE 10 ADJ-P14-BROWN 15 −−

315 ADJ-P14-WHITE 8 −− − −

400 ADJ-P14-BROWN 9 −− −−

630 ADJ-P14-BROWN 4 −− −−

3D3 40 −− −− ADJ-P14-ORANGE 24 63 −− −− ADJ-P14-ORANGE 20

100 ADJ-P14-ORANGE 11 −− −−

2008 Sep 01 952

P cores and accessories P14/8 COIL FORMERS General data for CP-P14/8 coil former Winding data and area product for CP-P14/8 coil former PARAMETER SPECIFICATION Coil former material polybutyleneterephtalate (PBT), glass reinforced, flame retardant in accordance with “UL 94V-0”; UL file number E45329 (R) Maximum operating temperature 155 °C, “IEC 60085”, class F NUMBER OF SECTIONS WINDING AREA (mm2) MINIMUM WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 8.8 4.1 28.9 221 CP-P14/8-1S 22 × 4.0 2 × 1.85 28.9 2 x 100 CP-P14/8-2S handbook, full pagewidth CBW601 2.2 0.5 0.4 0.4 0.3 6.1 +0.2 11.5 0 −0.27.1 0 −0.15 5.4 0 −0.2 Fig.3 Coil former CP-P14/8. Dimensions in mm.

2008 Sep 01 953

P cores and accessories P14/8 General data for CP-P14/8-A coil former Winding data and area product for CP-P14/8-A coil former PARAMETER SPECIFICATION Coil former material acetal (POM), glass reinforced, flame retardant in accordance with “UL 94-HB”; UL file number E66288(R) Maximum operating temperature 155 °C, “IEC 60085”, class F NUMBER OF SECTIONS MINIMUM WINDING AREA (mm2) NOMINAL WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 9.4 4.5 29.0 236 CP-P14/8-1S-A 2 2 x 4.32 2 x 2.0 29.0 2 x 108 CP-P14/8-2S-A 33 × 2.19 3 × 1.2 29.0 3 x 55.0 CP-P14/8-3S-A 6.1 min 5.5 max 1.9 min 7.1 11.55 max MGB529 Fig.4 Coil former CP-P14/8-A. Dimensions in mm.

2008 Sep 01 954

P cores and accessories P14/8 General data 4-pins P14/8 coil former for PCB mounting Winding data and area product for 4-pins P14/8 coil former for PCB mounting PARAMETER SPECIFICATION Coil former material polyamide (P A6.6), glass reinforced, flame retardant in accordance with “UL 94V-0”; UL file number E41938(M) Maximum operating temperature 130 °C, “IEC 60085” , class B Pin material copper-zinc alloy (CuZn), tin (Sn) plated Resistance to soldering heat “IEC 60068-2-20”, Part 2, Test Tb, method 1B, 350 °C, 3.5 s Solderability “IEC 60068-2-20”, Part 2, Test Ta, method 1, 235 °C, 2 s NUMBER OF SECTIONS MINIMUM WINDING AREA (mm2) NOMINAL WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) LENGTH OF PINS (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 8.65 4.4 29.0 4.75 217 CPV-P14/8-1S-4SPD 1 8.65 4.4 29.0 6.8 217 CPV-P14/8-1S-4SPDL handbook, full pagewidth CBW1066.8 max. 5.4 max. 4.45 16.1 7.1 2.4 4.75 ± 0.256.1 max. min. 11.55 max. max. 0.75 3.55 Fig.5 P14/8 coil former for PCB mounting; 4-pins. Dimensions in mm.

2008 Sep 01 955

P cores and accessories P14/8 General data 6-pins P14/8 coil former for PCB mounting Winding data and area product for 6-pins P14/8 coil former for PCB mounting PARAMETER SPECIFICATION Coil former material polyamide (P A6.6), glass reinforced, flame retardant in accordance with “UL 94V-0”; UL file number E41938(M) Maximum operating temperature 130 °C, “IEC 60085” , class B Pin material copper-zinc alloy (CuZn), tin (Sn) plated Resistance to soldering heat “IEC 60068-2-20”, Part 2, Test Tb, method 1B, 350 °C, 3.5 s Solderability “IEC 60068-2-20”, Part 2, Test Ta, method 1, 235 °C, 2 s NUMBER OF SECTIONS MINIMUM WINDING AREA (mm NOMINAL WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) LENGTH OF PINS (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 8.65 4.4 29.0 4.4 217 CPV-P14/8-1S-6PD 1 8.65 4.4 29.0 6.8 217 CPV-P14/8-1S-6PDL handbook, full pagewidth CBW1076.85 max. 5.4 max. 4.45 16.3 7.11 max. 2.4 4.35 min.10.2 max. min. 11.55 max. max. 0.75 7.1 Fig.6 P14/8 coil former for PCB mounting; 6-pins. Dimensions in mm.

2008 Sep 01 956

P cores and accessories P14/8 MOUNTING PARTS General data for mounting parts ITEM REMARKS FIGURE TYPE NUMBER Tag plate material: phenolformaldehyde (PF), glass reinforced 7 TGP-P14/8-C flame retardant: in accordance with “UL 94V-0”; UL file number E41429 maximum operating temperature: 180 °C, “IEC 60085”, class H pins: copper-tin alloy (CuSn), tin (Sn) plated resistance to soldering heat in accordance with “IEC 60068-2-20”, Part 2, Test Tb, method 1B: 350 °C, 3.5 s solderability in accordance with “IEC 60068-2-20”, Part 2, Test Ta, method 1: 235°C, 2 s Container copper-zinc alloy (CuZn), tin (Sn) plated 8 CON-P14/8 earth pins: presoldered Spring CrNi-steel 9 SPR-P14/8 spring force: ≈60 N when mounted Clamp spring steel, tin-plated 10 CLM/TP-P14/8 Washer phenolformaldehyde (PF) 11 WAS-CLM/TP-P14/8 2.1 1.55.08 5.0810.16 mark 15.7 max. 3.5 ∅0.8 2.54 CBW602 1.3 +0.15 Fig.7 Tag plate: TGP-P14/8-C. Dimensions in mm.

2008 Sep 01 957

P cores and accessories P14/8 handbook, full pagewidth CBW422 mark 8 9.45 max. 15.6 max. 4.5 0.6 Fig.8 Container: CON-P14/8. Dimensions in mm. handbook, halfpage MGC169 13.4 max 1.3 +0.3 Fig.9 Spring: SPR-P14/8. Dimensions in mm.

2008 Sep 01 958

P cores and accessories P14/8 handbook, halfpage MBG174 9.65 9.4 13.2 Fig.10 Clamp: CLM/TP-P14/8. Dimensions in mm. handbook, halfpage 9.27 ± 0.05 13.7 0 − 0.13 MGB604 0.38 ± 0.08 Fig.11 Washer: WAS-CLM/TP-P14/8. Dimensions in mm.

2008 Sep 01 959

P cores and accessories P14/8 DATA SHEET STATUS DEFINITIONS DISCLAIMER Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains prelimin ary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability.