P1100G_LRP LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

Protection solution to meet

  • RoHS compliant
  • Bidirectional transient voltage protection
  • Axial lead through-hole component
  • Teccor brand SIDACtor technology Part Number “_” = A or B Marking “_” = A or B VDRM @lDRM=5µA VS @100V/µs IH IS IT VT @IT=1 amp Capacitance @1MHz, 2V bias Volts Volts mAmps mAmps Amps Volts pF Min Max Min Max Max Max Min Max P1100G_LRP P11_ 90 130 150 800 1 .0 5 30 60 P1300G_LRP P13_ 120 160 150 800 1 .0 5 25 40 P1500G_LRP P15_ 140 180 150 800 1 .0 5 25 40 P1800G_LRP P18_ 170 220 150 800 1 .0 5 25 40 P2300G_LRP P23_ 190 260 150 800 1 .0 5 25 30 P2600G_LRP P26_ 220 300 150 800 1 .0 5 25 30 P3100G_LRP P31_ 275 350 150 800 1 .0 5 20 30 P3500G_LRP P35_ 320 400 150 800 1 .0 5 20 30
  • YD/T 950
  • YD/T 993
  • YD/T 1082
  • GR 1089 Intra-building
  • IEC 61000-4-5
  • ITU K.20/21 Basic Level
  • TIA-968-A
  • All measurements are made at an ambient temperature of 25°C.
  • Listed SIDACtor devices are bidirectional. All electrical parameters and surge ratings apply to forward and reverse polarities. Agency Approvals Agency Agency File Number E133083

brand Protection Thyristors Axial Leaded www.littelfuse.com ©2006 Littelfuse DO-15 Series (A/B Rated) Specifications are subject to change without notice. Telecom Design Guide Series IPP 10x1000 µs 10x560 µs Amps Amps Min Min A 45 B 80 100

  • IPP applies to -40°C through +85°C temperature range.
  • IPP is a repetitive surge rating and is guaranteed for the life of the product. Surge Ratings tr x td Pulse WaveformV-I Characteristics IH IT IS IDRM VDRMVT +V-V VS 100 tr td Peak Value Half Value t – Time (µs) IPP – Peak Pulse Current – %I PP tr = rise time to peak value td = decay time to half valu e Waveform = tr x td -40 -20 0 2 0 4 0 6 0 8 0 100 120 140 160 Junction Temperature (TJ) – ˚C Percent of VS Change – % 25 ˚C 0.4 -40 -20 0 2 0 4 0 6 0 8 0 100 120 140 160 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Case Temperature (TC) – ˚C Ratio of IH IH (TC = 25 ˚C) 25 ˚C Normalized VS Change Versus Junction T emperature Normalized DC Holding Current Versus Case T emperature

brand Protection Thyristors Axial Leaded www.littelfuse.com ©2006 Littelfuse DO-15 Series (A/B Rated) Specifications are subject to change without notice. Telecom Design Guide Reflow Condition Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 190°C - Time (min to max) (ts) 60 – 150 seconds Average ramp up rate (Liquidus Temp (TL) to peak) 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 220°C - Time (min to max) (ts) >60 – <150 seconds Peak Temperature (TP) 250+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes max. Do not exceed 280°C Soldering Parameters Physical Specifications T erminal Material Matte Tin-plated Axial leads Lead Solderability MIL -STD-750, Method 2026 Environmental Specifications Operating/Storage T emperature -40° C to ~ +150°C Passive Aging 125° C, 1000 hours Meet Spec Humidity Aging +85°C, 85% R.H. 1000 hours Meet Spec Thermal Shock MIL -STD-202 Method 107G +85°C/-40°C 100 times Meet Spec Solvent Resistance MIL -STD-202, Method 215 No Change Vibration MIL -STD-883C, Method 2007 .1, Condition A No Change Dimensions DO-15 SERIES [25.40] 1.000 [25.40] 1.000 MIN MIN Dimensions in inches and (millimeters) [0.71] .028 .034[0.86] [2.60] .104 .140[3.56] [7.62] .300 .230[5.80]

brand Protection Thyristors Axial Leaded www.littelfuse.com ©2006 Littelfuse DO-15 Series (A/B Rated) Specifications are subject to change without notice. Telecom Design Guide First Line: Product Name (see marking column in table on page 1) Second Line: Lot number XXXX XXXX Part Marking System Part Numbering System Package Type Description Packing Quantity Added Suffix Industry Standard DO-15 Axial 5000 RP EIA RS-296 Packaging T ape and Reel Specification Symbol Description Inches MM A Component Spacing (lead to lead) 0.200 ± 0.020” 5.08 ± 0.508 B Tape Spacing 2.062 ± 0.059” 52.37 ± 1 .498 C Tape Width 0.250” 6.35 D Max. Off Alignment 0.048” 1 .219 E Reel Dimension 13” 330.2 F Max Hub Recess 3” 76.19 G Max. Abor Hole 0.68” 17 .27 H Reel Dimension 2.75” 69.85 CONSTRUCTION VARIATION P : Single SIDACtor chip used as a single device PACKING STYLE RP : Reel Pack per EIA RS-296 SURGE IPP Rating A 45AMP 10x1000µs B : A : 80AMP 10x1000µs PACKAGE TYPE G : DO-15 L : RoHS Compliant DEVICE TYPE : SIDACtor Pxxx 0 L X RP MEDIAN VOLTAGE xxx : xxx volts G OFF CENTER BOTH SIDES (±0.039") B OVERALL LENGTH C A E F G H LABEL recess depth max 0.75” D OFF CENTER BOTH SIDES (±0.039") B OVERALL LENGTH C A E F G H LABEL recess depth max 0.75” D