P11S VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 15

Technical content

P11S, P11A www.vishay.com Vishay Sfernice Revision: 20-Aug-13 1 Document Number: 51031 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 12.5 mm Modular Panel Potentiometer Cermet (P11S) or Conductive Plastic Elements (P11A)

FEATURES

  • 12.5 mm square single turn panel control
  • Five shaft diameters and 29 terminal styles
  • Multiple assemblies - up to seven modules
  • Tests according to CECC 41000 or IEC 60393-1
  • G A M T 1
  • P11S version for industrial , military, and aeronautics

applications

  • P11A version for professional audio applications
  • Low current compatibility
  • Shaft and panel sealed version
  • Up to twenty-one indent positions
  • Rotary and push/push switch options
  • Concentric shafts
  • Custom designs on request
  • Trimmer version T11 (see document no. 51021)
  • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 VERSATILE MODULAR COMPACT ROBUST CONFIGURATION EXAMPLE - Dimensions in millimeters (inches) ± 0.5 mm (± 0.02") Single module, single shaft, solder lugs, metric bushing and shaft Single module, single shaft, vertical mounting, PC pins with support plate, metric bushing and shaft Dual modules, single shaft, PC pins with front support plates, imperial bushing and shaft (0.866) 5.07 (0.200) (0.315) 4.65 (0.183) A DETAIL A 0,9 (0.035) 1.8 (0.071) M6 x 0.75 Ø (0.118) 2.4 (0.094) 12.5 (0.492) 4.65 (0.183) 12.5 (0.492) 5 (0.197) 6.85 (0.270) 13.1 (0.516) 4.9 (0.193) M10 x 0.75 Ø (0.236) 9.5 (0.374) (0.626) 12.7 (0.500) (0.315) 2.54 (0.100) 2.54 (0.100) 3/8" x 3/8" 12.5 (0.492) 13.1 (0.516) 2.54 (0.100) 2.54 (0.100) (0.325) 9.5 (0.374) 3.6 (0.143)6.35 Ø (0.250) 19.05 (0.750) 7.62 (0.300)

P11S, P11A www.vishay.com Vishay Sfernice Revision: 20-Aug-13 2 Document Number: 51031 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GENERAL SPECIFICATIONS Note (1) Consult Vishay Sfernice for other ohmic values ELECTRICAL (initial) P11A P11S Resistive Element Conductive plastic Cermet Electrical Travel 270° ± 10° 270° ± 10° Resistance Range (1) Linear Taper 1 kΩ to 1 MΩ 20 Ω to 10 MΩ Non-Linear Taper 470 Ω to 500 kΩ 100 Ω to 2.2 MΩ Tolerance Standard ± 20 % ± 20 % On Request - ± 5 % or ± 10 % Taper Circuit Diagram Power Rating at 70 °C Linear Taper 0.5 W at + 70 °C 1 W at + 70 °C Non-Linear Taper 0.25 W at + 70 °C 0.5 W at + 70 °C Multiple Assemblies 0.25 W at + 70 °C per module 0.5 W at + 70 °C per module Temperature Coefficient (Typical) ± 500 ppm ± 150 ppm Limiting Element Voltage 350 V 350 V End Resistance (Typical) 2 Ω 2 Ω Contact Resistance Variation (Typical) Linear Taper 1 % 2 % or 3 Ω Independent Linearity (Typical) Linear Taper ± 5 % ± 5 % Insulation Resistance 10 6 MΩ min. 10 6 MΩ min. Dielectric Strength 1500 VRMS min. 1500 V RMS min. Attenuation 90 dB max./0.05 dB min. - Mechanical Endurance 50 000 cycles 50 000 cycles R F S W L A 90 % 50 % 20 % 10 % Vs %Ve Mechanical travel 300° 31°31° Electrical travel with switch 238° 15°15° Electrical travel 270° 50 % a (1) b (2) c (3) cw 130706050403020100 Ambient Temperature (°C) Rated Power (W) 1201101009080 0.5 P11S Linear Taper P11S Non-Linear Taper P11A Linear Taper 0.25 P11A Non-Linear Taper

P11S, P11A www.vishay.com Vishay Sfernice Revision: 20-Aug-13 3 Document Number: 51031 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MECHANICAL (initial) Mechanical Travel 300° ± 5° Operating Torque (Typical) End Stop Torque (All Bushing Except G and Concentric Shaft Configuration) 3 mm, 4 mm, and 1/8" Dia. Shafts 35 Ncm max. (2.9 lb-inch max.) 6 mm and 1/4" Dia. Shafts 80 Ncm max. (6.8 lb-inch max.) End Stop Torque for Bushing G All Shafts Dia. 40 Ncm max. (3.4 lb-inch max.) End Stop Torque for Concentric Shaft Configuration 3 mm and 1/8" Dia. Shafts 25 Ncm max. (2.1 lb-inch max.) 6 mm and 1/4" Dia. Shafts 80 Ncm max. (6.8 lb-inch max.) Tightening Torque 6 mm, 7 mm, and 1/4" Dia. Bushings 150 Ncm max. (13 lb-inch max.) 10 mm and 3/8" Dia. Bushings 250 Ncm max. (21 lb-inch max.) Weight 7 g to 9 g per module (0.25 oz. to 0.32 oz.) ENVIRONMENTAL P11A P11S Operating Temperature Range - 55 °C to + 125 °C - 55 °C to + 125 °C Climatic Category 55/125/21 55/125/56 Sealing IP64 IP64 MARKING

  • Potentiometer Module Vishay logo, nominal ohmic value ( Ω, k Ω, M Ω), two stars identify P11A vers ion, tolerance in % - variation law, manufacturing date (four digits), “3” for the lead 3
  • S w i t c h M o d u l e Version, manufacturing date (four digits), “c” for common lead
  • Indent Module Version, manufacturing date (four digits) PACKAGING
  • Box PERFORMANCES TESTS CONDITIONS TYPICAL VALUE AND DRIFTS P11S P11A Electrical Endurance 1000 h at rated power 90’/30’ - ambient temp. 70 °C ΔRT/RT ± 2 % ± 10 % Contact resistance variation ± 4 % ± 5 % Change of Temperature - 55 °C to + 125 °C, 5 cycles ΔRT/RT ± 0.2 % ± 0.5 % Damp Heat, Steady State + 40 °C, 93 % relative humidity P11S: 56 days, P11A: 21 days ΔRT/RT ± 2 % ± 5 % Insulation resistance > 1000 M Ω > 10 MΩ Mechanical Endurance 50 000 cycles ΔRT/RT ± 5 % ± 6 % Contact resistance variation ± 5 % ± 4 % Climatic Sequence Dry heat at + 125 °C/damp heat cold - 55 °C/damp heat, 5 cycles ΔRT/RT ± 1 % - Shock 50 g’s, 11 ms 3 shocks - 3 directions Vibration 10 Hz to 55 Hz 0.75 mm or 10 g’s, 6 h

P11S, P11A www.vishay.com Vishay Sfernice Revision: 20-Aug-13 4 Document Number: 51031 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ORDERING INFORMATION (part number) P11S2Q0EASY00103 M A MODEL STYLE NUMBER OF MODULES BUSHING LOCATING PEG SHAFT SHAFT STYLE LEADS RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL P11 S = Cermet element A = Conductive plastic (audio) STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES P11S CERMET P11A CONDUCTIVE PLASTIC LINEAR TAPER NON-LINEAR TAPER L INEAR TAPER NON-LINEAR TAPER MAX. POWER AT 70 °C MAX. WORKING VOLTAGE MAX. CUR. THROUGH WIPER MAX. POWER AT 70 °C MAX. WORKING VOLTAGE MAX. CUR. THROUGH WIPER MAX. POWER AT 70 °C MAX. WORKING VOLTAGE MAX. CUR. THROUGH WIPER MAX. POWER AT 70 °C MAX. WORKING VOLTAGE MAX. CUR. THROUGH WIPER Ω W V mA W V mA W V mA W V mA 22 1 4.69 213 47 1 6.86 146 50 1 7.07 141 100 1 10.0 100 0.5 7.07 70.7 4.7M 0.26 350 0.074 5M 0.25 350 0.070 10M 0.12 350 0.035

P11S, P11A www.vishay.com Vishay Sfernice Revision: 20-Aug-13 5 Document Number: 51031 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes

  • Hardware supplied in separate bags
  • Slotted bushing for locking nut option ORDERING INFORMATION (part number) P11S2Q0EASY00103 M A MODEL STYLE NUMBER OF MODULES BUSHING LOCATING PEG SHAFT SHAFT STYLE LEADS RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL P11 ØL O l d C o d e s B 1/4" 3/8" 71 C 1/4" 1/2" 72 D 1/4" 3/8" 71H E 1/4" 1/2" 72H G 8 8 TP, QP, VP, 2P, 7P Q7 8 Q T6 8 T V 10 9.5 V, CC, CC-3 BUSHING DIMENSIONS PANEL CUT OUT A B C KJ Ø H G Bushings F and V G Ø H Bushings A, B, C, D, E, T and Q 7.2 (0.284) Ø 8.5 (0.335) Bushing G PANEL AND SHAFT SEALED: BUSHING G BUSHING D AND E WITH LOCKING NUT All models have the same bushing Dia. 8 mm - L 8 mm Ø 8 (0.315) 6.7 (0.264) (0.315) A B C Wrench 10 or 3/8" J BUSHINGS GTQVABCDEF DIMENSIONS mm (± 0.5) DIMENSIONS INCHES (± 0.02) A Shafts Ø All Dia. 3 4 6 1/8" 1/8" 1/8" 1/8" 1/8" 1/4" B Bushing Ø 8 6 7 10 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" Thread 0.75 32 threads/inch Style Slotted Slotted

P11S, P11A www.vishay.com Vishay Sfernice Revision: 20-Aug-13 6 Document Number: 51031 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ORDERING INFORMATION (part number) P11S2Q0EASY00103 M A MODEL STYLE NUMBER OF MODULES BUSHING LOCATING PEG SHAFT SHAFT STYLE LEADS RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL Old Codes A = B24 B = B30 C = B53 0 = Without peg LOCATING PEGS (anti-rotation lug) The locating peg is provided by a plate mounted on the bushing and positioned by the module sides. Four set positions are available, clock face orientation: 12, 3, 6, 9. CODE VERSION BUSHING A, B, C, D, E, T, Q BUSHING F, V EFFECTIVE HIGH PEG All P11 bushings have a doub le flat. When panel mounting holes have been punc hed accordingly, an anti-rotation lug is not necessary. A Ø d mm 2 2 0.7 L mm 6.2 6.2 B Ø d mm 2 2 0.7 L mm 7.75 7.75 C Ø d mm - 3.5 1.1 L mm - 13.5 Locating pegs are supplied in separate bags with nuts and washers L Ø d

P11S, P11A www.vishay.com Vishay Sfernice Revision: 20-Aug-13 7 Document Number: 51031 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ORDERING INFORMATION (part number) P11S2Q0EASY00103 M A MODEL STYLE NUMBER OF MODULES BUSHING LOCATING PEG SHAFT SHAFT STYLE LEADS RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL S = SlottedØ L Old Codes AA 3 9.5 K R = Round AB 3 12.5 M F = Flatted AJ 3 22 R K = Knurled/ splinedAP = Custom shaft BA 1/8" 3/8" CK D = Custom BB 1/8" 1/2" CM BG 1/8" 5/8" CDM BG 1/8" 5/8" CD BH 1/8" 3/4" CH BJ 1/8" 7/8" CR CC = Concentric shaft EA 4 9.5 E EB 4 12.5 F EJ 4 22 G FG 6 16 D FH 6 19 I FL 6 25 N FR 6 50 S GG 1/4" 5/8" VD GH 1/4" 3/4" VHM, VH GJ 1/4" 7/8" VR GL 1/4" 1" VN GO 1/4" 1.5" VL SHAFTS in millimeters ± 0.5 The shaft length is always measured from the mounting face. Standard shafts are designed by a 3 letters code (3 digits). Shafts slots are aligned to ± 10° of the wiper position. All standard shafts are slotted except flatted and splined, see exeptions for bushing. BUSHING: Q SPLINED SHAFT: FHK FLATTED SHAFT CUSTOM SHAFTS When special shafts are required - flat, threated ends, special shaft lengths, etc. a drawing is required. STANDARD COMBINATION OF SHAFT STYLES AND BUSHINGS SHAFT DIA. BUSHING CODE SHAFT LENGTH AND STYLE AVAILABLE IN STANDARD (others on request) 3T A A S A B S A J S

3.17 A BAS BBS BGS BGF BHS BJS

3.17 B BBS BGS BHS BJS

3.17 C BGS BHS BJS

4Q E A S E B S E J S F H K

6 V FGS FLS FRS

6.35 F GGS GHS GJS GLS GOS GHF

Ø 7 Ø 6 19.1 8 ± 0.5 Ø 6.35 5.5 ± 0.05 Bushing: F Shaft: GHF Bushing: A Shaft: BGF 15.9 8 ± 0.5 2.4 ± 0.05 Ø 3.17 0.3 at 45°

P11S, P11A www.vishay.com Vishay Sfernice Revision: 20-Aug-13 8 Document Number: 51031 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ORDERING INFORMATION (part number) P11S2Q0EASY00103 M A MODEL STYLE NUMBER OF MODULES BUSHING LOCATING PEG SHAFT SHAFT STYLE LEADS RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL Available leads A00 W00 X00 Y00 Z00 A10 W10 X03 Y03 Z03 A13 W20 X04 Y04 Z04 A14 X10 Z10 A20 X13 Z13 A23 X14 Z14 A24 X20 Z20 X23 Z23 X24 Z24 FIRST DIGIT SECOND DIGIT THIRD DIGIT Y Soldering lugs Y = 4.65 (0.183") A, X, Z, W = 5.08 (0.200") pin spacing pins section 0.9 x 0.3 (0.035" x 0.012") 0 5.08 (0.200") space between modules X PCB pins 3 7.62 (0.300") space between modules Z PCB pins with front support plate 4 10.16 (0.400") space between modules A PCB pins with front and back support plates 1 2.54 (0.100") pin spacing pin section 0.6 x 0.3 (0.024" x 0.012") W PCB pins - vertical mounting with 2 extra pins - 1 module only 2 5.08 (0.200") pin spacing pins section 0.6 x 0.3 (0.024" x 0.012") DIMENSIONS in millimeters (inches) ± 0.5 mm (± 0.02") THE POSITION OF EACH MODULE IS FREE BUSHINGS GTQVABCDE F DIMENSIONS mm (± 0.5) DIMENSIONS INCHES (± 0.02) 3.71 (0.146) 6.85 (0.270) J (0.512) 4.7 (0.185) 12.5 (0.492) 12.5 (0.492) 4.7 (0.185) 2.4 (0.09) 1.8 (0.07)5 (0.197) 0.9 (0.035) 0.9 (0.035) SOLDER LUGS Y 2.54 (0.100) 5.08 (0.200) X12X-X 23 1 2 3 PCB PIN OUT HORIZONTAL MOUNTING E F 6.35 (0.250) A/A2 (0.150) 3.81 (0.150) 3.81 FRONT AND REAR SUPPORT PLATES FRONT SUPPORT PLATE 2.54 (0.100) 5.08 (0.200) 3.81 (0.150) 5.08 (0.200) 5.08 (0.200) 3.81 (0.150) 2Z1ZZ 123 1 2 3 123 VERTICAL MOUNTING AB C K 4 (0.157) 12.7 (0.500) 12.7 (0.500) 5.08 (0.200) 2.54 (0.100) 12.7 (0.500) W-W2 1 2 3 12 3 Rear support plate

P11S, P11A www.vishay.com Vishay Sfernice Revision: 20-Aug-13 9 Document Number: 51031 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ORDERING INFORMATION (part number) P11S2Q0EASY00103 M A MODEL STYLE NUMBER OF MODULES BUSHING LOCATING PEG SHAFT SHAFT STYLE LEADS RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL From 20 Ω to 10 MΩ see instructions on electrical specifications Resistance code: 200 = 20 Ω to 106 = 10 MΩ Tolerance code: Standard: M = ± 20 % On request: K = ± 10 %, J = ± 5 % (cermet only) Taper: A, L, W, F, S, R or special code given by Vishay SPECIAL CODES GIVEN BY VISHAY Option available:

  • C u s t o m s h a f t
  • Custom design on request
  • Specific linearity
  • Specific interlinerarity
  • Specific taper
  • Multiple assemblies with various modules

P11S, P11A www.vishay.com Vishay Sfernice Revision: 20-Aug-13 10 Document Number: 51031 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11 OPTION: ROTARY SWITCH MODULES

  • Rotary switchs
  • Current up to 2 A
  • Actuation CW or CCW position
  • Sealing IP60 MODULES: RS ON/OFF SWITCH RSI CHANGEOVER SWITCH The position of each module is free. RS and RSI rotary switches are housed in a standard P11 They have the same terminal styles as the assembled electrical modules. An assembly can comprise 1 or more switch modules. Switch actuation is described as seen from the shaft end. D: Means actuation in maximum CCW position F: Means actuation in maximum CW position The switch actuation travel is 25° with a total mechanical travel of 300° ± 5° and electrical travel of electrical modules is 238° ± 10°. Leads finish: Gold plated RDS SINGLE POLE SWITCH, NORMALLY OPEN In full CCW position, the contact between 1 and 3 is open. It is made at the beginning of the travel in CW direction. RSF SINGLE POLE SWITCH, NORMALLY OPEN In full CW position, the contact between 1 and 3 is open. It is made at the beginning of the travel in CCW direction. RSID SINGLE POLE CHANGEOVER In full CCW position, the contact is made between 3 and 2 and open between 3 and 1. Switch actuation (CW direction) reverses these positions. RSIF SINGLE POLE CHANGEOVER In full CW position, the contac t is made between 1 and 2 and open between 1 and 3. Switch actuation (CCW direction) reverses these positions. SWITCH SPECIFICATIONS Switching Power Maximum 62.5 VA ν

15 VA =

Switching Current Maximum 0.25 A 250 V ν

0.5 A 30 V =

Maximum Current Through Element 2 A Contact Resistance 100 m Ω Dielectric Strength Terminal to Terminal 1000 V RMS Terminal to Bushing 2000 V RMS Maximum Voltage Operation 250 V ν

30 V =

Insulation Resistance Between Contacts 10 6 MΩ Life at Pmax. 10 000 actuations Minimal Travel 25° Operating Temperature - 40 °C to + 85 °C ELECTRICAL DIAGRAM Note (1) Common ORDERING INFORMATION (First order only) RSD SPST: Single pole, open switch in CCW position - 2 pins RSF SPST: Single pole, open switch in CW position - 2 pins RSID SPDT: Single pole, changeover switch in CCW position - 3 pins RSIF SPDT: Single pole, changeover switch in CW position - 3 pins RSIF CW POSITION 1 (1) 32 RSID CCW POSITION 1 3 (1)2 RSD RSF RSID

P11S, P11A www.vishay.com Vishay Sfernice Revision: 20-Aug-13 11 Document Number: 51031 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11 OPTION: PUSH/PUSH OR MOMENTARY/PUSH SWITCH MODULES

  • Push/push or momentary push
  • Current up to 2 A
  • Sealing IP60 MODULES: PUSH/PUSH SWITCH RSPP MOMENTARY/PUSH SWITCH RSMP They have to be the last element of potentiometer Options: 2 reversing switches F2 4 reversing switches F4 6 reversing switches F6 8 reversing switches F8 Not available with panel sealed option. Number of modules before the switch limited to 3 modules. Length of shaft (FMF) 25 mm maximum. RSPP F2: PUSH/PUSH SWITCH WITH TWO REVERSING SWITCHES Idle position: The contact is made between 1 and 2 and a and b. It is open between 2 and 3 and b and c. Pushed position: The contact is made between 2 and 3 and b and c. It is open between 1 and 2 and a and b. SWITCH SPECIFICATIONS Switching Power Maximum 50 VA ν Switching Current Maximum 0.5 A ν Maximum Current Through Element 2 A Contact Resistance 100 m Ω Dielectric Strength Terminal to Terminal 1500 V RMS Terminal to Bushing 2000 V RMS Maximum Voltage Operation 250 V ν Insulation Resistance Between Contacts 10 3 MΩ Life at Pmax. 100 000 actuations Minimal Travel 3.3 mm to 4.7 mm Operating Temperature - 40 °C to + 70 °C ELECTRICAL DIAGRAM ORDERING INFORMATION (First order only for special code creation) RSPP: Push/push F2: 2 reversing switches (standard version) RSMP: Momentary/push F4: 4 reversing switches F6: 6 reversing switches F8: 8 reversing switches 3.3 (0.013) 1.3 (0.051) 40.8 (1.60) (1.10) (0.15) 3.6 (0.14) a b c1 2 3 (0.15) RSPP F2 213 bac IDLE POSITION PUSHED POSITION RSPP F2

P11S, P11A www.vishay.com Vishay Sfernice Revision: 20-Aug-13 12 Document Number: 51031 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11 OPTION: CONCENTRIC SHAFTS The CC concentric shaft versions allies the total flexibility of the P11 modular system to the advantage of having two separate shafts. The outer 6 mm or 1/4" or 1/8" dia. shaft drives the modules situated immediately behind the panel, before the spacer module. The inner 3 mm or 1/8" or 0.07" dia. sh aft drives the modules situated after the spacer module. Spacer is available with a choice of two spacer thickness: 5.08 mm designations or 2.54 mm designation. See dimensional drawing BUSHING CODE OUTER SHAFT DIAMETER INNER SHAFT DIAMETER DIAMETER LENGTH L SHAFT STYLE DIAMETER LENGTH l SHAFT STYLE V 6 16 R 3 28.5 R ORDERING INFORMATION (First order only for special code creation) 2.54: Mechanical spacer of 2.54 mm 5.08: Mechanical spacer of 5.08 mm Customer should define witch modules is driven by each shaft (see example of ordering information at the end of the datasheet) P11 OPTION: DETENT MODULES The detents mechanism is housed in a standard P11 module. Up to 21 detent positions available. Count detents as foll ows: 1 for CCW position, 1 for full CW position, plus the other positions forming equal resistance increments (linear taper) - not equal angles. Available: CVID - CVIF - CVIM CV3 - CV11 - CV21 Mechanical endurance: 10 000 cycles ORDERING INFORMATION (First order only for special code creation) CV1M 1 detent at half travel CV1M J84 CV1M with accuracy of center point ± 2 % (all tapers except S) CV1D 1 detent at CCW position CV1F 1 detent at CW position CV3 3 detents CV11 11 detents CV21 21 detents P11 OPTION: NEUTRAL MODULES “EN” Neutral or screen module is housed in a standard P11 module. It is used as a screen between two electrical modules. The leads can be connected to ground. ORDERING INFORMATION (First order only for special code creation) EN Neutral module Spacer module 5.08 2.54 L l 5.08 CVID CVIM CVIF CV1 1 β β α = 270 ° n - 1 β = α + 15 ° α CV1M EN

P11S, P11A www.vishay.com Vishay Sfernice Revision: 20-Aug-13 13 Document Number: 51031 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11 OPTION: CENTER CURRENT TAP “J” The extra terminal is a solder lug connected at 50 % of electrical travel and siluated in the pote ntiometer module opposite the terminals. Center tap presents a short circuit of 11° of travel.

  • Sealing IP60 ORDERING INFORMATION (First order only) J Center tap P11 OPTION: SPECIAL LINEARITY - CONFORMITY The independent linearity (conformity for the non-linear laws) is the maximum gap ΔV between the actual variation curve and the theorical variation curve the nearest to it. The linearity and the conformity are expressed in percentage of the total applied voltage E They are measured over 90 % of actual electrical travel (centered). On request linearity can be guaranteed in linear taper. ORDERING INFORMATION (First order only) J123 Independent linearity ± 3 % (linear law) J145 Independent linearity ± 2 % (linear law) For other request, contact us. P11 OPTION: SPECIAL INTERLINEARITY - INTERCONFORMITY It is the maximum deviation between the actual voltage outputs of 2 or more pot modules in the same assembly. It is expressed as a percentage of the total applied voltage, or in dB attenuation. Interlinearity is me asured between 2 pot modules, over 20 to 90 % of the attenuation. The interlinearity or interc onformity is expressed as a percentage of the total applied voltage: Or in decibels by comparison between outputs V1 and V2 ORDERING INFORMATION (First order only) J44 Interlinearity ± 2 % (linear taper) For other request, contact us. 100 % 50 % 0 % 11° J VE V Limits of linearity test Effective electrical travel Degrees linearity conformity ± ΔVmax. J123 VE C Limits of test Effective electrical travel V1 V2 Degrees I % C I dB 20 log J44

P11S, P11A www.vishay.com Vishay Sfernice Revision: 20-Aug-13 14 Document Number: 51031 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 EXAMPLES OF FIRST ORDER INFORMATION FIRST EXAMPLE: Triple module (switch is counted as a module) P11S3Q0APSY00 MODEL P11 STYLE S 3 MODULES BUSHING Q (Ø 7: L8) WITHOUT LOCATING PEG CUSTOM SHAFT SLOTTED SOLDER LUGS SPECIAL TO BE DEFINED BY VISHAY ORDERING INFORMATION: SHAFT AND BUSHING See drawing of special shaft attached MODULE NO. 1 RSID MODULE NO. 2 103 M A J123 MODULE NO. 3 503 M A J SECOND EXAMPLE: Concentric shaft with 2 modules on each shaft P11S5V0C CRY00 MODEL P11 STYLE S 5 MODULES BUSHING Q (Ø 10: L9.5) WITHOUT LOCATING PEG STANDARD CONCENTRIC SHAFT CCR SOLDER LUGS SPECIAL TO BE DEFINED BY VISHAY ORDERING INFORMATION: SHAFT AND BUSHING MODULE NO. 1 CV1M Driven by outer shaft MODULE NO. 2 502 K A Driven by outer shaft MODULE NO. 3 5.08 Mechanical spacer 5.08 mm MODULE NO. 4 103 M A J44 Driven by inner shaft MODULE NO. 5 103 M A J44 Driven by inner shaft PART NUMBER DESCRIPTION (used on some Vishay document or label, for information only) P11S 2 Q 0 EA S Y00 10K 20 % A e3 MODEL MODULES BUSHING LOCATING PEG SHAFT SHAFT STYLE LEADS VALUE TOL. TAPER SPECIAL SPECIAL LEAD (Pb)-FREE

www.vishay.com Vishay Revision: 02-Oct-12 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain type s of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. Parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. All operating parameters, including typical pa rameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vish ay’s terms and condit ions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicate d in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vi shay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certi fies that all its products that are id entified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The Euro pean Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We co nfirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards.