STB11NM80_V01 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 22

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Packaging mechanical data
  • 6 Revision history

Features

■ Low input capacitance and gate charge ■ Low gate input resistance ■ Best RDS(on)*Qg in the industry

Applications

■ Switching applications

Description

These N-channel Power MOSFETs are developed using STMicroelectronics' revolutionary MDmesh™ technology, which associates the multiple drain process with the company's PowerMESH™ horizontal layout. These devices offer extremely low on-resistance, high dv/dt and excellent avalanche characteristics. Utilizing ST's proprietary strip technique, these Power MOSFETs boast an overall dynamic performance which is superior to similar products on the market. Figure 1. Internal schematic diagram Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Limited only by the maximum temperature allowed
  2. Pulse width limited by safe operating area

Table 3. Thermal data

  1. When mounted on 1inch² FR-4 board, 2 oz Cu

Table 4. Avalanche characteristics

2 Electrical characteristics

Table 5. On/off states

  1. Characteristic value at turn off on inductive load

Table 6. Dynamic

  1. Pulsed: pulse duration=300µs, duty cycle 1.5%

Table 7. Source drain diode

  1. Pulse width limited by safe operating area
  2. Pulsed: pulse duration=300µs, duty cycle 1.5%

2.1 Electrical characterist ics (curves)

Figure 2. Safe operating area for D²PAK, Figure 3. Thermal impedance for D²PAK, Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP Figure 6. Output characteristics Figure 7. Output characteristics @ T J=150 °C

3 Test circuits

Figure 17. Switching times test circuit for Figure 18. Gate charge test circuit Figure 19. Test circuit for inductive load Figure 20. Unclamped inductive load test Figure 21. Unclamped inductive wavefor m Figure 22. Switching time waveform

Package mechanical data STB/F/I/P/W11NM80 10/22 Doc ID 9241 Rev 11

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.

Table 8. D²PAK (TO-263) mechanical data

Figure 25. TO-220FP drawing Table 9. TO-220FP mechanical data

Figure 26. I²PAK (TO-262) drawing Table 10. I²PAK (TO-262) mechanical data

Table 11. TO-220 type A mechanical data

Figure 27. TO-220 type A drawing

Table 12. TO-247 mechanical data

Figure 28. TO-247 drawing

5 Packaging mechanical data

Table 13. D²PAK (TO-263) tape and reel mechanical data

6 Revision history

Table 14. Document revision history