P11L VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 13

Technical content

www.vishay.com Vishay Sfernice Revision: 04-Jul-17 1 Document Number: 51060 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Long Life Cermet Potentiometer 2 Million Cycles

FEATURES

  • 2 million cycles
  • Cermet element
  • 12.5 mm square single turn panel control
  • 4, 6 and 6.35 shaft diameters and 29 terminal styles
  • Multiple assemblies - up to four modules
  • Test according to CECC 41000 or IEC 60393-1
  • Low temperature coefficient
  • Custom designs on request
  • Linearity ± 3 % (± 2 % available)
  • Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA Multiple module Up to 4 modules Switch module Yes Detent module Yes Special electrical laws A: linear, L: logarithmic, F: reverse logarithmic and others see specifications Sealing level IP 64 Lifespan 2M cycles VERSATILE MODULAR COMPACT ROBUST CONFIGURATION EXAMPLE - Dimensions in millimeters (inches) ± 0.5 mm (± 0.02") Single module, single shaft, vertical mounting, PC pins with support plate, metric bushing and shaft Dual modules, single shaft, PC pins with front support plates, imperial bushing and shaft M10 x 0.75 Ø (0.236) 9.5 (0.374) (0.626) 12.7 (0.500) (0.315) 2.54 (0.100) 2.54 (0.100) 3/8" x 3/8" 12.5 (0.492) 13.1 (0.516) 2.54 (0.100) 2.54 (0.100) (0.325) 9.5 (0.374) 3.6 (0.143)6.35 Ø (0.250) 19.05 (0.750) 7.62 (0.300)

www.vishay.com Vishay Sfernice Revision: 04-Jul-17 2 Document Number: 51060 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GENERAL SPECIFICATIONS Note

  • Nothing stated herein shall be construed as a guarantee of quality or durability ELECTRICAL (initial) Resistive element Cermet Electrical travel 270° ± 10° Standard resistance values 1 k , 5 k, 10 k, 50 k Tolerance standard ± 20 % on request ± 5 % or ± 10 % Taper Circuit diagram Power rating at 70 °C linear taper 0.1 W at +70 °C non-linear taper 0.05 W at +70 °C multiple assemblies 0.1 W at +70 °C per module Temperature coefficient (typical) ± 150 ppm Limiting element voltage 350 V End resistance (typical) 2  Independent linearity ± 3 % (± 2 % available) Insulation resistance 10 6 M min. Dielectric strength 1500 VRMS min. Attenuation - Mechanical endurance 2 000 000 cycles 100 00 100 80604020 % CLOCKWISE SHAFT ROTATION % TOTAL RESISTANCE F L A a (1) b (2) c (3) cw AMBIENT TEMPERATURE IN °C POWER IN W 0 20 40 60 70 80 100 120 140 0.10 P11L LINEAR TAPER 0.05 P11L LOG. TAPER

www.vishay.com Vishay Sfernice Revision: 04-Jul-17 3 Document Number: 51060 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MECHANICAL (initial) Mechanical travel 300° ± 5° Operating torque (typical) End stop torque 4 mm dia. shafts 35 Ncm max. (2.9 lb-inch max.) 6 mm and 1/4" dia. shafts 80 Ncm max. (6.8 lb-inch max.) Tightening torque 7 mm dia. bushings 150 Ncm max. (13 lb-inch max.) 10 mm and 3/8" dia. bushings 250 Ncm max. (21 lb-inch max.) Weight 7 g to 9 g per module (0.25 oz. to 0.32 oz.) ENVIRONMENTAL Operating temperature range -55 °C to +125 °C Climatic category 55/125/56 Sealing IP64 MARKING

  • Potentiometer module Vishay logo, SAP code of ohmic value, and tolerance in %, identify P11L version, variation law, manufacturing date (four digits), “3” for the lead 3
  • Switch module Version, manufacturing date (four digits), “c” for common lead PACKAGING
  • Box PERFORMANCES TESTS CONDITIONS TYPICAL VALUES AND DRIFTS RT/RT (%) R1-2/R1-2 (%) OTHER Electrical endurance 1000 h at rated power 90’/30’ - ambient temp. 70 °C ± 2 % - - Climatic sequence Dry heat at +125 °C/damp heat cold -55 °C/damp heat, 5 cycles ± 1 % - - Damp heat, steady state +40 °C, 93 % relative humidity 56 days ± 2 % - Insulation resistance: > 1000 M  Change of temperature -55 °C to +125 °C, 5 cycles ± 0.2 % - - Mechanical endurance 2 million cycles turn angle: ± 60° temperature: 20 °C ± 20 % - Independent linearity: ± 10 % Shock 50 g’s, 11 ms 3 shocks - 3 directions ± 0.2 % ± 0.5 % - Vibration 10 Hz to 55 Hz 0.75 mm or 10 g’s, 6 h ± 0.2 % - V 1-2/V1-3 = ± 0.5 %

www.vishay.com Vishay Sfernice Revision: 04-Jul-17 4 Document Number: 51060 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ORDERING INFORMATION (part number) P11L2FA G O SY00502K A MODEL NUMBER OF MODULES BUSHING LOCATING PEG SHAFT SHAFT STYLE LEADS RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL P11L 1 STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES LINEAR TAPER NON-LINEAR TAPER MAX. POWER AT 70 °C MAX. WORKING VOLTAGE MAX. POWER AT 70 °C MAX. WORKING VOLTAGE  WVWV 1K 0.1 10.0 0.05 7.1 5K 0.1 22.4 0.05 15.8 10K 0.1 31.6 0.05 22.4 50K 0.1 70.7 0.05 50.0

www.vishay.com Vishay Sfernice Revision: 04-Jul-17 5 Document Number: 51060 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

  • Hardware supplied in separate bags ORDERING INFORMATION (part number) P11L2FA G O SY00502K A MODEL NUMBER OF MODULES BUSHING LOCATING PEG SHAFT SHAFT STYLE LEADS RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL ØL F 3/8" 3/8" Q78 V1 0 9 . 5 BUSHING DIMENSIONS A B C KJ PANEL CUT OUT Ø H G Bushings F and V G Ø H Bushing Q BUSHINGS mm (± 0.5) mm (± 0.5) INCHES (± 0.02) VQF A Shafts Ø 6 4 1/4 B Bushing Ø 10 7 3/8 C L 9.5 8 3/8 K 11.1 9.1 0.436 G Panel 8.2 6.2 0.323 H Cutout Ø 10.5 7.5 0.394 Thread 0.75 0.75 32 thread/inch Wrench nut 12 10 0.500

www.vishay.com Vishay Sfernice Revision: 04-Jul-17 6 Document Number: 51060 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ORDERING INFORMATION (part number) P11L2FA G O SY00502K A MODEL NUMBER OF MODULES BUSHING LOCATING PEG SHAFT SHAFT STYLE LEADS RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL A = see table belowB = C = 0 = without peg LOCATING PEGS (anti-rotation lug) The locating peg is provided by a plate mounted on the bushing and positioned by the module sides. Four set positions are available, clock face orientation: 12, 3, 6, 9. CODE Ø d (mm) L (mm) e (mm) All P11 bushings have a doub le flat. When panel mounting holes have been punc hed accordingly, an anti-rotation lug is not necessary. A2 6 . 2 0 . 7 B 2 7.75 0.7 Locating peg code C not available for bushing Q. C 3.5 13.5 1.1 Locating pegs are supplied in separate bags with nuts and washers L Ø d

www.vishay.com Vishay Sfernice Revision: 04-Jul-17 7 Document Number: 51060 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ORDERING INFORMATION (part number) P11L2FA G O SY00502K A MODEL NUMBER OF MODULES BUSHING LOCATING PEG SHAFT SHAFT STYLE LEADS RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL Ø L S = slotted AP = Custom shaft R = round EA 4 9.5 F = flatted EB 4 12.5 D = custom EJ 4 22 FG 6 16 FL 6 25 FR 6 50 GG 1/4" 5/8" GH 1/4" 3/4" GJ 1/4" 7/8" GL 1/4" 1" GO 1/4" 1.5" SHAFTS - Dimensions in millimeters (inches) The shaft length is always measured from the mounting face. Standard shafts are designed by a 3 letters code (3 digits). Shaft slots and flats are aligned with the wiper position (± 10°); picture shows shaft with wiper at middle of mechanical/electrical course. All standard shafts are slotted except flatted and splined, see exeptions for bushing. SPLINED SHAFT FLATTED SHAFT CUSTOM SHAFTS When special shafts are required - flat, threated ends, special shaft lengths, etc. a drawing is required. STANDARD COMBINATION OF SHAFT STYLES AND BUSHINGS SHAFT DIA. BUSHING CODE SHAFT LENGTH AND STYLE AVAILABLE IN STANDARD (others on request)

6 V FGS FLS FRS

6.35 F GGS GHS GJS GLS GOS GHF

4Q E A S E B S E J S F H K Ø 7 Ø 6 Bushing: Q Shaft: FHK 19.1 8 ± 0.5 Ø 6.35 5.5 ± 0.05 Bushing: F Shaft: GHF

www.vishay.com Vishay Sfernice Revision: 04-Jul-17 8 Document Number: 51060 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ORDERING INFORMATION (part number) P11L2FA G O SY00502K A MODEL NUMBER OF MODULES BUSHING LOCATING PEG SHAFT SHAFT STYLE LEADS RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL Available leads A00 W00 X00 Y00 Z00 A10 W10 X03 Y03 Z03 A13 W20 X04 Y04 Z04 A14 X10 Z10 A20 X13 Z13 A23 X14 Z14 A24 X20 Z20 X23 Z23 X24 Z24 FIRST DIGIT SECOND DIGIT THIRD DIGIT Y Soldering lugs A, X, Z, W = 5.08 (0.200") pin spacing  pins section 0.9 x 0.3 (0.035" x 0.012") 0 5.08 (0.200") space between modules X PCB pins 3 7.62 (0.300") space between modules Z PCB pins with front support plate 4 10.16 (0.400") space between modules A PCB pins with front and back support plates 1 2.54 (0.100") pin spacing pin section 0.6 x 0.3 (0.024" x 0.012") W PCB pins - vertical mounting with 2 extra pins - 1 module only 2 5.08 (0.200") pin spacing pins section 0.6 x 0.3 (0.024" x 0.012") DIMENSIONS in millimeters (inches) ± 0.5 mm (± 0.02") THE POSITION OF EACH MODULE IS FREE BUSHINGS MILLIMETERS (± 0.5) INCHES (± 0.02) VQF E Leads Z00 3.85 1.85 0.150 3.71 (0.146) 6.85 (0.270) J (0.512) 4.7 (0.185) 12.5 (0.492) 12.5(0.492) 4.7 (0.185) 2.4 (0.09) 1.8 (0.07)5 (0.197) 0.9 (0.035) 0.9 (0.035) SOLDER LUGS Y 2.54 (0.100) 5.08 (0.200) X12X-X 23 1 2 3 PCB PIN OUT HORIZONTAL MOUNTING E F 6.35 (0.250) A/A2 (0.150) 3.81 (0.150) 3.81 FRONT AND REAR SUPPORT PLATES FRONT SUPPORT PLATE 2.54 (0.100) 5.08 (0.200) 3.81 (0.150) 5.08 (0.200) 5.08 (0.200) 3.81 (0.150) 2Z1ZZ 123 1 2 3 123 VERTICAL MOUNTING AB C K 4 (0.157) 12.7 (0.500) 12.7 (0.500) 5.08 (0.200) 2.54 (0.100) 12.7 (0.500) W-W2 1 2 3 12 3 Rear support plate

www.vishay.com Vishay Sfernice Revision: 04-Jul-17 9 Document Number: 51060 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ORDERING INFORMATION (part number) P11L2FA G O SY00502K A MODEL NUMBER OF MODULES BUSHING LOCATING PEG SHAFT SHAFT STYLE LEADS RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL Resistance code: 1K = 102 5K = 502 10K = 103 50K = 503 Tolerance code: standard: M = ± 20 % on request: Taper: A, L, F or special code given by Vishay SPECIAL CODES GIVEN BY VISHAY Option available:

  • C u s t o m s h a f t
  • Specific design on request
  • Specific linearity
  • Multiple assemblies with various modules APPLICATION NOTE The potentiometer shall be used in vo ltage divider with an impedance load at least 100 times higher than the to tal potentiometer no minal resistance value. Advised load impedance: 1 M min. for resistance range of 1 k to 50 k (1) a (2) b c (3) cw Vs Ve Z > 1 MΩ

www.vishay.com Vishay Sfernice Revision: 04-Jul-17 10 Document Number: 51060 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11L OPTION: ROTARY SWITCH MODULES

  • Rotary switch
  • Current up to 2 A
  • Actuation CW or CCW position
  • Sealing IP60  MODULES: RS ON/OFF SWITCH RSI CHANGEOVER SWITCH The position of each module is free. RS and RSI rotary switches are housed in a standard P11L They have the same terminal styles as the assembled electrical modules. An assembly can comprise 1 or more switch modules. Switch actuation is described as seen from the shaft end. D: Means actuation in maximum CCW position F: Means actuation in maximum CW position The switch actuation travel is 25° with a total mechanical travel of 300° ± 5° and electrical travel of electrical modules is 238° ± 10°. Leads finish: Gold plated RDS SINGLE POLE SWITCH, NORMALLY OPEN In full CCW position, the contact between 1 and 3 is open. It is made at the beginning of the travel in CW direction. RSF SINGLE POLE SWITCH, NORMALLY OPEN In full CW position, the contact between 1 and 3 is open. It is made at the beginning of the travel in CCW direction. RSID SINGLE POLE CHANGEOVER In full CCW position, the contact is made between 3 and 2 and open between 3 and 1. Switch actuation (CW direction) reverses these positions. RSIF SINGLE POLE CHANGEOVER In full CW position, the contac t is made between 1 and 2 and open between 1 and 3. Switch actuation (CCW direction) reverses these positions. SWITCH SPECIFICATIONS Switching power maximum 0.5 VA = Switching current maximum 0.1 A, 5 V = Maximum current through element 2 A Contact resistance 100 m  Dielectric strength Terminal to terminal 1000 V RMS Terminal to bushing 2000 V RMS Maximum voltage operation 5 V = Insulation resistance between contacts 10 6 M Life at Pmax. 100 000 actuations Minimal travel 25° Operating temperature -40 °C to +85 °C ELECTRICAL DIAGRAM Note (1) Common ORDERING INFORMATION (First order only) RSD SPST: Single pole, open switch in CCW position - 2 pins RSF SPST: Single pole, open switch in CW position - 2 pins RSID SPDT: Single pole, changeover switch in CCW position - 3 pins RSIF SPDT: Single pole, changeover switch in CW position - 3 pins RSIF CW POSITION 1 (1) 32 RSID CCW POSITION 1 3 (1)2 RSD RSF RSID

www.vishay.com Vishay Sfernice Revision: 04-Jul-17 11 Document Number: 51060 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11L OPTION: DETENT MODULES The detents mechanism is housed in a standard P11L module. Up to 21 detent positions available. Count detents as foll ows: 1 for CCW position, 1 for full CW position, plus the other positions forming equal resistance increments (linear taper) - not equal angles. Available: CVID - CVIF - CVIM  CV3 - CV11 - CV21 Mechanical endurance: 50 000 cycles ORDERING INFORMATION (First order only for special code creation) CV1M 1 detent at half travel CV1D 1 detent at CCW position CV1F 1 detent at CW position CV3 3 detents CV11 11 detents CV21 21 detents P11L OPTION: NEUTRAL MODULES “EN” Neutral or screen module is housed in a standard P11L module. It is used as a screen between two electrical modules. The leads can be connected to ground. ORDERING INFORMATION (First order only for special code creation) EN Neutral module P11L OPTION: SPECIAL LINEARITY - CONFORMITY The independent linearity (conformity for the non-linear laws) is the maximum gap V between the actual variation curve and the theoretical variation curve the nearest to it. The linearity and the conformity are expressed in percentage of the total applied voltage E They are measured over 90 % of actual electrical travel (centered). On request linearity can be guaranteed in linear taper. ORDERING INFORMATION (First order only) J123 Independent linearity ± 3 % (linear law) J145 Independent linearity ± 2 % (linear law) For other request, contact us. CVID CVIM CVIF CV1 1 β β α = 270 ° n - 1 β = α + 15 ° α CV1M EN VE V Limits of linearity test Effective electrical travel Degrees linearity conformity ± Vmax. J123

www.vishay.com Vishay Sfernice Revision: 04-Jul-17 12 Document Number: 51060 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 EXAMPLES OF FIRST ORDER INFORMATION FIRST EXAMPLE: Triple module (switch is counted as a module) P11L3VAFGSY00 MODEL P11L 3 MODULES BUSHING V LOCATING PEG STANDARD SHAFT 16 mm FMS SLOTTED SOLDER LUGS SPECIAL TO BE DEFINED BY VISHAY ORDERING INFORMATION: SHAFT AND BUSHING See drawing of special shaft attached MODULE NO. 1 503 M A MODULE NO. 2 103 M A J123 MODULE NO. 3 503 M A PART NUMBER DESCRIPTION (used on some Vishay document or label, for information only) P11L 3 V A FG S Y00 T1927 e3 MODEL MODULES BUSHING LOCATING PEG SHAFT SHAFT STYLE LEADS VALUE TOL. TAPER SPECIAL SPECIAL LEAD (Pb)-FREE RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029

www.vishay.com Vishay Revision: 08-Feb-17 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applicatio ns are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular applic ation. It is the customer’s responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different ap plications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay product s not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED