P115 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

  • UL508 Recognized and load break rated for 1000vdc systems
  • Hermetically sealed contactor: ensures make/break switching up to 1200Vdc
  • Best option for: NEC 690.11 and 690.12 DC arc fault interrupting and rapid shutdown requirements
  • Small, lightweight and cost effective patented design
  • Perfect choice for 600Vdc and 1000Vdc photovoltaic/battery systems SPECIFICATIONS Specifications Units Data Contact Arrangement Form X SPST-NO Dielectric at Sea Level Vrms 4300 Contact Voltage, Operating Max Vdc 1500 Continuous Current Carry, Max (8 AWG)@ 25°C A 50 Continuous Current Carry, Max (8 AWG)@ 65°C A 25 Mechanical Life Cycles 1,000,000 Contact Voltage Drop, Max @ 50A mV 100 Contact Resistance, Max @ 50A (after 30 sec) mOhms 3.25 Operate Time, Max ms 25 Release Time, Max ms 8 Vibration, Sinusoidal (50-200Hz Peak) G 5 Shock, Operating, 1/2 Sine, 11ms G 20 Temperature, Operating Range 1/ °C -40° to +65° Humidity, No Freezing or Condensing at Low Tempera- ture RH 5% to 85% Weight grams 135 Short Circuit Current Withstanding (5ms) A 400 Impulse Withstand Voltage: IEC61000-4-4 (500 ohm) kV 6

www.sensata.comCopyright © 2022 Sensata Technologies, Inc. COIL RATINGS @ 25°C 2 Coil P/N Designation B C F Coil Voltage Nominal 12 Vdc 24 VDC 48 Vdc Coil Voltage Max 16 Vdc 32 Vdc 64 Vdc Pick-up, Volts, Max 7.5 Vdc 15 Vdc 30 Vdc Drop-out, Volts, Max 5 Vdc 9 Vdc 18 Vdc Drop Out Voltage, Min 0.20 Vdc 0.40 Vdc 0.80 Vdc Coil Resistance, +/-10% 70 Ohms 280 Ohms 1092 Ohms Coil Current at Nominal Voltage 0.170 A 0.085 A 0.045 A Recommended External Coil Suppression (not included) SMAJ40CA or P6KE47CA-E3/54 SMAJ40CA or P6KE47CA-E3/54 SMAJ100CA or P6KE120CA POWER SWITCHING CURRENT CARRY RATINGS CURRENT CARRY vs TIMEDC RESISTIVE CLOSING CYCLE ESTIMATES 65°C 25°C

www.sensata.comCopyright © 2022 Sensata Technologies, Inc. Family P115 Coil Voltage B: 12 Vdc C: 24 Vdc F: 48 Vdc Coil Termination D: Studs, M3 Power Terminals A: Studs, M4 ORDERING OPTIONS Example : P115BDA P115 - B - D - A DIMENSIONS 5.33 .210 53.95 2.124 1.351 34.32 Coil Terminals: 2X M3 Studs Power Terminals: 2X M4 Studs 4X 36.98 1.456 1.305 33.14 71.9 2.83 36.50 1.437 21.2 .83 81.28 3.200 .183 4.64 .500 12.70 Mounting M4 or 8-32 Screws Torque 1.3-1.7Nm [12-15in-lb] Case Material Thermoplastic Polyester Resin Power Connection M4 Studs Torque 1.3-1.7Nm [12-15in-lb] max Coil Termination M3 Studs Torque 0.5Nm [5in-lb] max All dimensions are +/- 0.5mm

www.sensata.com CONTACT USCopyright © 2022 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. Americas +1 (805) 684-8401 gigavac@sensata.com Rev:23-Mar-2022 WARNINGS RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE

  • The product’s side panels may be hot, allow the product to cool before touching
  • Follow proper mounting instructions including torque values
  • Do not allow liquids or foreign objects to enter this product Failure to follow these instructions can result in serious injury, or equipment damage. HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
  • Disconnect all power before installing or working with this equipment
  • Verify all connections and replace all covers before turning on power Failure to follow these instructions will result in death or serious injury.
  • Electrical life rating is based on resistive load with 27μH maximum inductance in circuit. Because your application may be different, we suggest you test the contactor in your circuit to verify life is as required.
  • Contactor is bi-directional and therefore can carry, make, and break current in both directions.
  • Contactor is not sensitive to direction of installation and can be mounted in any position or axis. APPLICATION NOTES GENERAL NOTES 1. Temperature range refers to ambient conditions. Terminal temperature can exceed listed values. 2. Contactor is operated by a coil that changes resistance with temperature. Since pick-up current, coil current and coil power are specified at nom- inal voltage, they will be lower than indicated at temperatures above 25°C and higher than indicated at temperatures below 25°C. Similarly, pick-up and drop-out voltages will be higher than indicated at temperatures above 25°C and lower than indicated at temperatures below 25°C.