DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

SIDACtor® Protection Thyristors Revised: 01/09/14 © 2014 Littelfuse, Inc. Specifications are subject to change without notice. Baseband Protection (Voice-DS1) SIDACtor® Series, DO-214

Electrical Characteristics

SIDACtor® Series - DO-214 SIDACtor® Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides a surface mount solution that enables equipment to comply with global regulatory standards.

Description

Features and Benefits t Low voltage overshoot t Low on-state voltage t Does not degrade surge capability after multiple surge events within limit. t Fails short circuit when surged in excess of ratings t Low capacitance Part Number Marking VDRM @lDRM=5μA VS @100V/μs IH IS IT VT @IT=2.2 Amps Capacitance @1MHz, 2V bias V min V max mA min mA max A max V max pF min pF max P0080SALRP P-8A 6 25 50 800 2.2 4 25 150 P0220SALRP P22A 15 32 50 800 2.2 4 25 150 P0300SALRP P03A 25 40 50 800 2.2 4 15 140 P0640SALRP P06A 58 77 150 800 2.2 4 40 60 P0720SALRP P07A 65 88 150 800 2.2 4 35 60 P0900SALRP P09A 75 98 150 800 2.2 4 25 55 P1100SALRP P11A 90 130 150 800 2.2 4 30 50 P1300SALRP P13A 120 160 150 800 2.2 4 25 45 P1500SALRP P15A 140 180 150 800 2.2 4 25 40 P1800SALRP P18A 170 220 150 800 2.2 4 25 35 P2100SALRP P21A 180 240 150 800 2.2 4 20 35 P2300SALRP P23A 190 260 150 800 2.2 4 25 35 P2600SALRP P26A 220 300 150 800 2.2 4 20 35 P3100SALRP P31A 275 350 150 800 2.2 4 20 35 P3500SALRP P35A 320 400 150 800 2.2 4 20 35 P0080SBLRP P-8B 6 25 50 800 2.2 4 25 150 P0220SBLRP P22B 15 32 50 800 2.2 4 25 150 P0300SBLRP P03B 25 40 50 800 2.2 4 15 140 P0640SBLRP P06B 58 77 150 800 2.2 4 40 80 P0720SBLRP P07B 65 88 150 800 2.2 4 35 75 Applicable Global Standards t TIA-968-A t TIA-968-B t ITU K.20/21 Enhanced Level* t ITU K.20/21 Basic Level t GR 1089 Inter-building* t GR 1089 Intra-building t IEC 61000-4-5 t YD/T 1082 t YD/T 993 t YD/T 950 *A/B-rated parts require series resistance Pinout Designation Schematic Symbol Not Applicable T able continues on next page. RoHS

SIDACtor® Protection Thyristors Revised: 01/09/14 © 2014 Littelfuse, Inc. Specifications are subject to change without notice. Baseband Protection (Voice-DS1) SIDACtor® Series, DO-214 Electrical Parameters (continued) Surge RatingsSeries IPP ITSM 50/60 Hz di/dt0.2x310 1 0.5x700 2 2x10 1 2x10 2 8x20 1 1.2x50 2 10x160 1 10x160 2 10x560 1 10x560 2 5x320 1 9x720 2 10x360 1 10x360 2 10x1000 1 10x1000 2 5x310 1 10x700 2 A min A min A min A min A min A min A min A min A min A min Amps/μs max A 2 0 1 5 0 1 5 0 9 05 07 57 54 57 52 0 5 0 0 B 25 250 250 150 100 100 125 80 100 25 500 C 50 500 400 200 150 200 175 100 200 3 30 500 Notes:

1 Current waveform in μs

2 Voltage waveform in μs

3 For surge rating of P4500SCLRP 10x700μs min=150A & typical=180A

  • Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP ratings applicable over temperature range of -40ºC to +85ºC - The device must initially be in thermal equilibrium with -40°C < TJ < +150°C Part Number Marking VDRM @lDRM=5μA VS @100V/μs IH IS IT VT @IT=2.2 Amps Capacitance @1MHz, 2V bias V min V max mA min mA max A max V max pF min pF max P0900SBLRP P09B 75 98 150 800 2.2 4 35 70 P1100SBLRP P11B 90 130 150 800 2.2 4 30 70 P1300SBLRP P13B 120 160 150 800 2.2 4 25 60 P1500SBLRP P15B 140 180 150 800 2.2 4 25 55 P1800SBLRP P18B 170 220 150 800 2.2 4 25 50 P2100SBLRP P21B 180 240 150 800 2.2 4 20 35 P2300SBLRP P23B 190 260 150 800 2.2 4 25 50 P2600SBLRP P26B 220 300 150 800 2.2 4 20 45 P3100SBLRP P31B 275 350 150 800 2.2 4 20 45 P3500SBLRP P35B 320 400 150 800 2.2 4 20 40 P4500SBLRP P45B 400 530 150 800 2.2 4 20 65 P0080SCLRP P-8C 6 25 50 800 2.2 4 45 260 P0220SCLRP P22C 15 32 50 800 2.2 4 30 240 P0300SCLRP P03C 25 40 50 800 2.2 4 25 250 P0640SCLRP P06C 58 77 150 800 2.2 4 55 155 P0720SCLRP P07C 65 88 150 800 2.2 4 50 150 P0900SCLRP P09C 75 98 150 800 2.2 4 45 140 P1100SCLRP P11C 90 130 150 800 2.2 4 45 115 P1300SCLRP P13C 120 160 150 800 2.2 4 40 105 P1500SCLRP P15C 140 180 150 800 2.2 4 35 95 P1800SCLRP P18C 170 220 150 800 2.2 4 35 90 P2100SCLRP P21C 180 240 150 800 2.2 4 30 90 P2300SCLRP P23C 190 260 150 800 2.2 4 30 80 P2600SCLRP P26C 220 300 150 800 2.2 4 30 80 P3100SCLRP P31C 275 350 150 800 2.2 4 30 70 P3500SCLRP P35C 320 400 150 800 2.2 4 25 65 P4500SCLRP P45C 400 530 150 800 2.2 4 20 65 Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are bi-directional.

SIDACtor® Protection Thyristors Revised: 01/09/14 © 2014 Littelfuse, Inc. Specifications are subject to change without notice. Baseband Protection (Voice-DS1) SIDACtor® Series, DO-214 25°C Case Temperature (TC) - ºC 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 Ratio of IH IH (TC = 25ºC) Normalized VS Change vs. Junction T emperature Normalized DC Holding Current vs. Case T emperature IH IT IS IDRM VDRMVT +V-V VS 100 tr td Peak Value Half Value t – Time (μs) IPP – Peak Pulse Current – %I PP tr = rise time to peak value td = decay time to half value Waveform = t r x td V-I Characteristics tr x td Pulse Waveform Package Symbol Parameter Value Unit DO-214AA TJ Operating Junction Temperature Range -40 to +150 °C TS Storage Temperature Range -65 to +150 °C R0JA Thermal Resistance: Junction to Ambient 90 °C/W Thermal Considerations -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C Percent of VS Change – % 25 °C

SIDACtor® Protection Thyristors Revised: 01/09/14 © 2014 Littelfuse, Inc. Specifications are subject to change without notice. Baseband Protection (Voice-DS1) SIDACtor® Series, DO-214 Physical Specifications Environmental Specifications Lead Material Copper Alloy T erminal Finish 100% Matte-Tin Plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Time T emperature TP TL TS(max) TS(min) tP tL tS time to peak temperature (t 25ºC to peak) Ramp-down Ramp-up Preheat Critical Zone TL to TP Figure 1 Soldering Parameters Part Numbering CONSTRUCTION VARIABLE REEL PACK IPP RATING RoHS COMPLIANT TYPE P = SIDACtor P x LR P MEDIAN VOLTAGE PACKAGE TYPE xxx 0S High T emp Voltage Blocking 80% Rated VDRM (VAC Peak ) +125°C or +150°C, 504 or 1008 hrs. MIL -STD-750 (Method 1040) JEDEC, JESD22-A-101 T emp Cycling -65°C to +150°C, 15 min. dwell, 10 up to 100 cycles. MIL -STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased T emp & Humidity 52 V DC (+85°C) 85%RH, 504 up to 1008 hrs. EIA/ JEDEC, JESD22-A-101 High T emp Storage +150°C 1008 hrs. MIL -STD-750 (Method 1031) JEDEC, JESD22-A-101 Low T emp Storage -65°C, 1008 hrs. Thermal Shock 0°C to +100°C, 5 min. dwell, 10 sec. transfer, 10 cycles. MIL -STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker T est) +121°C, 100%RH, 2atm, 24 up to 168 hrs. EIA/ JEDEC, JESD22-A-102 Resistance to Solder Heat +260°C, 30 secs. MIL -STD-750 (Method 2031) Moisture Sensitivity Level 85%RH, +85°C, 168 hrs., 3 reflow cycles (+260°C Peak). JEDEC-J-STD-020, Level 1 Reflow Condition Pb-Free assembly (see Fig. 1) Pre Heat - Temperature Min (Ts(min)) +150°C - Temperature Max (Ts(max)) +200°C - Time (Min to Max) (ts) 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) +217°C - Temperature (tL) 60-150 secs. Peak Temp (TP) +260(+0/-5)°C Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed +260°C Part Marking Pxxx Date Code Part Marking Code (Refer to Electrical Characteristics Table) xxxxx

SIDACtor® Protection Thyristors Revised: 01/09/14 © 2014 Littelfuse, Inc. Specifications are subject to change without notice. Baseband Protection (Voice-DS1) SIDACtor® Series, DO-214 Package Type Description Quantity Added Suffix Industry Standard S DO-214AA Tape & Reel Pack 2500 RP EIA-481-D Packing Options T ape and Reel Specification — DO-214AA 0.472 (12.0) 0.36 (9.2) 0.315 (8.0) 0.157 (4.0) 0.49 (12.4) 0.512 (13.0) Arbor Hole Dia. 12.99 (330.0) Dimensions are in inches (and millimeters). Direction of Feed 0.059 DIA(1.5) Cover tape Dimensions — DO-214AA 0.079 (2.0) 0.1 10 (2.8) 0.079 (2.0) Pad Outline H K E F G AC B D Case Temperature Measurement Point inch (millimeter) Dimensions Inches Millimeters Min Max Min Max A 0.130 0.156 3.30 3.95 B 0.201 0.220 5.10 5.60 C 0.077 0.087 1 .95 2.20 D 0.159 0.181 4.05 4.60 E 0.030 0.063 0.75 1 .60 F 0.075 0.096 1 .90 2.45 G 0.002 0.008 0.05 0.20 H 0.077 0.104 1 .95 2.65 K 0.006 0.016 0.15 0.41